Analysis of Damage Features and Failures for Structural Materials and Parts
Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan.
Gespeichert in:
| Autor*in: |
Strnadel, Bohumír [verfasserIn] |
|---|
| Format: |
E-Book |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
Zurich: Trans Tech Publications, Limited ; 2017 ©2017 |
|---|
| Schlagwörter: |
|---|
| Anmerkung: |
Description based on publisher supplied metadata and other sources |
|---|---|
| Umfang: |
1 online resource (162 pages) |
| Reihe: |
Key Engineering Materials Ser. ; v.Volume 741 |
|---|
| Links: | |
|---|---|
| ISBN: |
978-3-0357-3127-9 |
| Katalog-ID: |
1733920641 |
|---|
| LEADER | 01000cam a22002652 4500 | ||
|---|---|---|---|
| 001 | 1733920641 | ||
| 003 | DE-627 | ||
| 005 | 20221229130154.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 200929s2017 xx |||||o 00| ||eng c | ||
| 020 | |a 9783035731279 |9 978-3-0357-3127-9 | ||
| 035 | |a (DE-627)1733920641 | ||
| 035 | |a (DE-599)KEP036501751 | ||
| 035 | |a (EBL)EBL5114422 | ||
| 035 | |a (EBR)ebr11461047 | ||
| 035 | |a (EBC)EBC5114422 | ||
| 035 | |a (EBP)036501751 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rda | ||
| 041 | |a eng | ||
| 082 | 0 | |a 620.1126 | |
| 100 | 1 | |a Strnadel, Bohumír |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Analysis of Damage Features and Failures for Structural Materials and Parts |
| 264 | 1 | |a Zurich |b Trans Tech Publications, Limited |c 2017 | |
| 264 | 4 | |c ©2017 | |
| 300 | |a 1 online resource (162 pages) | ||
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a Computermedien |b c |2 rdamedia | ||
| 338 | |a Online-Ressource |b cr |2 rdacarrier | ||
| 490 | 0 | |a Key Engineering Materials Ser. |v v.Volume 741 | |
| 500 | |a Description based on publisher supplied metadata and other sources | ||
| 520 | |a Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. | ||
| 520 | |a Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. | ||
| 650 | 0 | |a Materials-Fatigue-Congresses | |
| 650 | 0 | |a Materials-Fatigue | |
| 650 | 4 | |a Materials-Fatigue-Congresses.. | |
| 650 | 4 | |a Materials-Fatigue | |
| 650 | 4 | |a Electronic books | |
| 776 | 1 | |z 9783035711271 | |
| 776 | 0 | 8 | |i Erscheint auch als |n Druck-Ausgabe |z 9783035711271 |
| 856 | 4 | 0 | |u https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422 |m X:EBC |x Aggregator |z lizenzpflichtig |
| 856 | 4 | 2 | |u http://www.gbv.de/dms/bowker/toc/9783035711271.pdf |v 2022-12-29 |x Aggregator |3 Inhaltsverzeichnis |
| 912 | |a ZDB-30-PQE | ||
| 912 | |a GBV_ILN_370 | ||
| 912 | |a ISIL_DE-1373 | ||
| 912 | |a SYSFLAG_1 | ||
| 912 | |a GBV_KXP | ||
| 912 | |a GBV_ILN_2021 | ||
| 912 | |a ISIL_DE-289 | ||
| 951 | |a BO | ||
| 953 | |2 045F |a 620.1126 | ||
| 980 | |2 370 |1 01 |x 4370 |b 4535688052 |h olr-dda ebc |k Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. |u i |y z |z 07-06-24 | ||
| 980 | |2 2021 |1 01 |x DE-289 |b 3844897186 |c 00 |f --%%-- |d --%%-- |e --%%-- |j n |y l01 |z 29-01-21 | ||
| 981 | |2 370 |1 01 |x 4370 |y E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich |r https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=5114422 | ||
| 981 | |2 2021 |1 01 |x DE-289 |r https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=5114422 | ||
| 995 | |2 370 |1 01 |x 4370 |a olr-dda ebc | ||
| author_variant |
b s bs |
|---|---|
| matchkey_str |
book:9783035731279:2017---- |
| hierarchy_sort_str |
2017 |
| publishDate |
2017 |
| allfields |
9783035731279 978-3-0357-3127-9 (DE-627)1733920641 (DE-599)KEP036501751 (EBL)EBL5114422 (EBR)ebr11461047 (EBC)EBC5114422 (EBP)036501751 DE-627 ger DE-627 rda eng 620.1126 Strnadel, Bohumír verfasserin aut Analysis of Damage Features and Failures for Structural Materials and Parts Zurich Trans Tech Publications, Limited 2017 ©2017 1 online resource (162 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Key Engineering Materials Ser. v.Volume 741 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. Materials-Fatigue-Congresses Materials-Fatigue Materials-Fatigue-Congresses.. Materials-Fatigue Electronic books 9783035711271 Erscheint auch als Druck-Ausgabe 9783035711271 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035711271.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.1126 370 01 4370 4535688052 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3844897186 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=5114422 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=5114422 370 01 4370 olr-dda ebc |
| spelling |
9783035731279 978-3-0357-3127-9 (DE-627)1733920641 (DE-599)KEP036501751 (EBL)EBL5114422 (EBR)ebr11461047 (EBC)EBC5114422 (EBP)036501751 DE-627 ger DE-627 rda eng 620.1126 Strnadel, Bohumír verfasserin aut Analysis of Damage Features and Failures for Structural Materials and Parts Zurich Trans Tech Publications, Limited 2017 ©2017 1 online resource (162 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Key Engineering Materials Ser. v.Volume 741 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. Materials-Fatigue-Congresses Materials-Fatigue Materials-Fatigue-Congresses.. Materials-Fatigue Electronic books 9783035711271 Erscheint auch als Druck-Ausgabe 9783035711271 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035711271.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.1126 370 01 4370 4535688052 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3844897186 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=5114422 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=5114422 370 01 4370 olr-dda ebc |
| allfields_unstemmed |
9783035731279 978-3-0357-3127-9 (DE-627)1733920641 (DE-599)KEP036501751 (EBL)EBL5114422 (EBR)ebr11461047 (EBC)EBC5114422 (EBP)036501751 DE-627 ger DE-627 rda eng 620.1126 Strnadel, Bohumír verfasserin aut Analysis of Damage Features and Failures for Structural Materials and Parts Zurich Trans Tech Publications, Limited 2017 ©2017 1 online resource (162 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Key Engineering Materials Ser. v.Volume 741 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. Materials-Fatigue-Congresses Materials-Fatigue Materials-Fatigue-Congresses.. Materials-Fatigue Electronic books 9783035711271 Erscheint auch als Druck-Ausgabe 9783035711271 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035711271.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.1126 370 01 4370 4535688052 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3844897186 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=5114422 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=5114422 370 01 4370 olr-dda ebc |
| allfieldsGer |
9783035731279 978-3-0357-3127-9 (DE-627)1733920641 (DE-599)KEP036501751 (EBL)EBL5114422 (EBR)ebr11461047 (EBC)EBC5114422 (EBP)036501751 DE-627 ger DE-627 rda eng 620.1126 Strnadel, Bohumír verfasserin aut Analysis of Damage Features and Failures for Structural Materials and Parts Zurich Trans Tech Publications, Limited 2017 ©2017 1 online resource (162 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Key Engineering Materials Ser. v.Volume 741 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. Materials-Fatigue-Congresses Materials-Fatigue Materials-Fatigue-Congresses.. Materials-Fatigue Electronic books 9783035711271 Erscheint auch als Druck-Ausgabe 9783035711271 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035711271.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.1126 370 01 4370 4535688052 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3844897186 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=5114422 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=5114422 370 01 4370 olr-dda ebc |
| allfieldsSound |
9783035731279 978-3-0357-3127-9 (DE-627)1733920641 (DE-599)KEP036501751 (EBL)EBL5114422 (EBR)ebr11461047 (EBC)EBC5114422 (EBP)036501751 DE-627 ger DE-627 rda eng 620.1126 Strnadel, Bohumír verfasserin aut Analysis of Damage Features and Failures for Structural Materials and Parts Zurich Trans Tech Publications, Limited 2017 ©2017 1 online resource (162 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Key Engineering Materials Ser. v.Volume 741 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. Materials-Fatigue-Congresses Materials-Fatigue Materials-Fatigue-Congresses.. Materials-Fatigue Electronic books 9783035711271 Erscheint auch als Druck-Ausgabe 9783035711271 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035711271.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.1126 370 01 4370 4535688052 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3844897186 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=5114422 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=5114422 370 01 4370 olr-dda ebc |
| language |
English |
| format_phy_str_mv |
Book |
| building |
370 2021:0 |
| institution |
findex.gbv.de |
| selectbib_iln_str_mv |
370@ 2021@01 |
| topic_facet |
Materials-Fatigue-Congresses Materials-Fatigue Materials-Fatigue-Congresses.. Electronic books |
| dewey-raw |
620.1126 |
| isfreeaccess_bool |
false |
| authorswithroles_txt_mv |
Strnadel, Bohumír @@aut@@ |
| publishDateDaySort_date |
2017-01-01T00:00:00Z |
| dewey-sort |
3620.1126 |
| id |
1733920641 |
| language_de |
englisch |
| standort_str_mv |
--%%-- |
| series2 |
Key Engineering Materials Ser. |
| standort_iln_str_mv |
2021:--%%-- DE-289:--%%-- |
| author |
Strnadel, Bohumír |
| spellingShingle |
Strnadel, Bohumír ddc 620.1126 misc Materials-Fatigue-Congresses misc Materials-Fatigue misc Materials-Fatigue-Congresses.. misc Electronic books Analysis of Damage Features and Failures for Structural Materials and Parts |
| authorStr |
Strnadel, Bohumír |
| format |
eBook |
| dewey-ones |
620 - Engineering & allied operations |
| delete_txt_mv |
keep |
| author_role |
aut |
| collection |
KXP GVK SWB |
| publishPlace |
Zurich |
| remote_str |
true |
| abrufzeichen_iln_str_mv |
370@olr-dda ebc |
| abrufzeichen_iln_scis_mv |
370@olr-dda ebc |
| last_changed_iln_str_mv |
370@07-06-24 2021@29-01-21 |
| illustrated |
Not Illustrated |
| topic_title |
620.1126 Analysis of Damage Features and Failures for Structural Materials and Parts Materials-Fatigue-Congresses Materials-Fatigue Electronic books |
| publisher |
Trans Tech Publications, Limited |
| publisherStr |
Trans Tech Publications, Limited |
| topic |
ddc 620.1126 misc Materials-Fatigue-Congresses misc Materials-Fatigue misc Materials-Fatigue-Congresses.. misc Electronic books |
| topic_unstemmed |
ddc 620.1126 misc Materials-Fatigue-Congresses misc Materials-Fatigue misc Materials-Fatigue-Congresses.. misc Electronic books |
| topic_browse |
ddc 620.1126 misc Materials-Fatigue-Congresses misc Materials-Fatigue misc Materials-Fatigue-Congresses.. misc Electronic books |
| format_facet |
Elektronische Bücher Bücher Elektronische Ressource |
| standort_txtP_mv |
--%%-- |
| format_main_str_mv |
Text Buch |
| carriertype_str_mv |
cr |
| signature |
--%%-- |
| signature_str_mv |
--%%-- |
| dewey-tens |
620 - Engineering |
| isbn |
9783035731279 3035731276 9783035711271 3035711275 |
| isfreeaccess_txt |
false |
| title |
Analysis of Damage Features and Failures for Structural Materials and Parts |
| ctrlnum |
(DE-627)1733920641 (DE-599)KEP036501751 (EBL)EBL5114422 (EBR)ebr11461047 (EBC)EBC5114422 (EBP)036501751 |
| exemplarkommentar_str_mv |
370@Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. |
| title_full |
Analysis of Damage Features and Failures for Structural Materials and Parts |
| author_sort |
Strnadel, Bohumír |
| callnumber-first-code |
- |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology |
| recordtype |
marc |
| publishDateSort |
2017 |
| contenttype_str_mv |
txt |
| author_browse |
Strnadel, Bohumír |
| selectkey |
370:z 2021:l |
| physical |
1 online resource (162 pages) |
| class |
620.1126 |
| format_se |
Elektronische Bücher |
| author-letter |
Strnadel, Bohumír |
| dewey-full |
620.1126 |
| title_sort |
analysis of damage features and failures for structural materials and parts |
| title_auth |
Analysis of Damage Features and Failures for Structural Materials and Parts |
| abstract |
Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. Description based on publisher supplied metadata and other sources |
| abstractGer |
Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. Description based on publisher supplied metadata and other sources |
| abstract_unstemmed |
Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan. Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index. Description based on publisher supplied metadata and other sources |
| collection_details |
ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 |
| title_short |
Analysis of Damage Features and Failures for Structural Materials and Parts |
| url |
https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422 http://www.gbv.de/dms/bowker/toc/9783035711271.pdf |
| ausleihindikator_str_mv |
370 2021:- |
| remote_bool |
true |
| mediatype_str_mv |
c |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| callnumber-a |
--%%-- |
| up_date |
2024-07-16T23:38:13.576Z |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000cam a22002652 4500</leader><controlfield tag="001">1733920641</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20221229130154.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">200929s2017 xx |||||o 00| ||eng c</controlfield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9783035731279</subfield><subfield code="9">978-3-0357-3127-9</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)1733920641</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)KEP036501751</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBL)EBL5114422</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBR)ebr11461047</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBC)EBC5114422</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBP)036501751</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">620.1126</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Strnadel, Bohumír</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Analysis of Damage Features and Failures for Structural Materials and Parts</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Zurich</subfield><subfield code="b">Trans Tech Publications, Limited</subfield><subfield code="c">2017</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2017</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (162 pages)</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="0" ind2=" "><subfield code="a">Key Engineering Materials Ser.</subfield><subfield code="v">v.Volume 741</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">Description based on publisher supplied metadata and other sources</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials-Fatigue-Congresses</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials-Fatigue</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Materials-Fatigue-Congresses..</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Materials-Fatigue</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electronic books</subfield></datafield><datafield tag="776" ind1="1" ind2=" "><subfield code="z">9783035711271</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Erscheint auch als</subfield><subfield code="n">Druck-Ausgabe</subfield><subfield code="z">9783035711271</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422</subfield><subfield code="m">X:EBC</subfield><subfield code="x">Aggregator</subfield><subfield code="z">lizenzpflichtig</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://www.gbv.de/dms/bowker/toc/9783035711271.pdf</subfield><subfield code="v">2022-12-29</subfield><subfield code="x">Aggregator</subfield><subfield code="3">Inhaltsverzeichnis</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-30-PQE</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-1373</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_1</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_KXP</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-289</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">BO</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">620.1126</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="b">4535688052</subfield><subfield code="h">olr-dda ebc</subfield><subfield code="k">Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots.</subfield><subfield code="u">i</subfield><subfield code="y">z</subfield><subfield code="z">07-06-24</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="b">3844897186</subfield><subfield code="c">00</subfield><subfield code="f">--%%--</subfield><subfield code="d">--%%--</subfield><subfield code="e">--%%--</subfield><subfield code="j">n</subfield><subfield code="y">l01</subfield><subfield code="z">29-01-21</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="y">E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=5114422</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=5114422</subfield></datafield><datafield tag="995" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="a">olr-dda ebc</subfield></datafield></record></collection>
|
| fulltext |
Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy … Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material … Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness … Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin … Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound … Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet … Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures … Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment … Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime … Analysis on Critical CTOD of Long-Term Used Penstock … Combination Criterion for Multiple Laminar Flaws in Steel Components … Dynamic Tensile Testing of High Strength Armor Steel Plates … A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys … Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks … Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment … Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue … Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index … Non-Destructive Stress Evaluation of Tool Steel Using Scanning Hall Probe Microscope: Effect of Stress Direction on Three Dimensional Magnetic Fields … Subsized Specimens for Fracture Resistance Characterisation Including Transferability Issues … Determination of Mechanical Properties of Metallic Materials from Very Small Volumes by Means of Small Punch Test … Mechanics of Herbert Pendulum Hardness Tester and its Application … Microstructure Characterization of a Heterogeneous Weld for Welded Rotors … Degradation Mechanism of Dissimilar Metal Weld Joints on Steam Generator Collectors VVER 440MW Type … Visualization of Strain Distribution on Deformed Steels Using Digital Image Correlation Method … Reliability Evaluation of Car Power Module Using Electrical-Thermal-Structural Coupled Analysis Based on Field Driving Data … |
| _version_ |
1804780797775839232 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000cam a22002652 4500</leader><controlfield tag="001">1733920641</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20221229130154.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">200929s2017 xx |||||o 00| ||eng c</controlfield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9783035731279</subfield><subfield code="9">978-3-0357-3127-9</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)1733920641</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)KEP036501751</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBL)EBL5114422</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBR)ebr11461047</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBC)EBC5114422</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBP)036501751</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">620.1126</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Strnadel, Bohumír</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Analysis of Damage Features and Failures for Structural Materials and Parts</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Zurich</subfield><subfield code="b">Trans Tech Publications, Limited</subfield><subfield code="c">2017</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2017</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (162 pages)</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="0" ind2=" "><subfield code="a">Key Engineering Materials Ser.</subfield><subfield code="v">v.Volume 741</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">Description based on publisher supplied metadata and other sources</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Selected, peer reviewed papers from The Seventh International Workshop "New Methods of Damage and Failure Analysis of Structural Parts", November 1-4, 2016, Yokohama, Japan.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Intro -- Analysis of Damage Features and Failures for Structural Materials and Parts -- Preface, Committees -- Table of Contents -- Mechanical Properties of Functionally Graded Porous Aluminum Consisting of Pure Aluminum and Al-Mg-Si Aluminum Alloy -- Influence of Sintering Conditions on Mechanical Properties of Ag-Nano Sintered Material -- Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness -- Development of Evaluation Method that Takes into Account the Effect of the Fine Structure of Adhesive Interface for Delamination Strength of the Packaging Resin -- Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound -- Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet -- Mechanical Stability and Deformation-Induced Transformation of Retained Austenite in TRIP Steels at Low Temperatures -- Influence of Chloride for SCC Susceptibility on 15Cr Stainless Steel at High Temperatures under CO2 Environment -- Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy Used for Prediction of Nitinol Stent's Lifetime -- Analysis on Critical CTOD of Long-Term Used Penstock -- Combination Criterion for Multiple Laminar Flaws in Steel Components -- Dynamic Tensile Testing of High Strength Armor Steel Plates -- A Review of Subsurface Crack Initiation Models in High-Cycle Fatigue for Titanium Alloys -- Fatigue Crack Growth Simulation Using S-Version FEM: Application to Interacting Subsurface Cracks -- Effect of Stress Ratio on Fatigue Crack Growth Threshold for Austenitic Stainless Steels in Air Environment -- Effects of Slip Ratio on Damage and Microcracks in Carburized SCM420 Steel under Rolling Contact Fatigue -- Extrapolation of Imaginal Minimum Creep Rate in Compression by a Concept of SATO-Index.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials-Fatigue-Congresses</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials-Fatigue</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Materials-Fatigue-Congresses..</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Materials-Fatigue</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electronic books</subfield></datafield><datafield tag="776" ind1="1" ind2=" "><subfield code="z">9783035711271</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Erscheint auch als</subfield><subfield code="n">Druck-Ausgabe</subfield><subfield code="z">9783035711271</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=5114422</subfield><subfield code="m">X:EBC</subfield><subfield code="x">Aggregator</subfield><subfield code="z">lizenzpflichtig</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://www.gbv.de/dms/bowker/toc/9783035711271.pdf</subfield><subfield code="v">2022-12-29</subfield><subfield code="x">Aggregator</subfield><subfield code="3">Inhaltsverzeichnis</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-30-PQE</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-1373</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_1</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_KXP</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-289</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">BO</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">620.1126</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="b">4535688052</subfield><subfield code="h">olr-dda ebc</subfield><subfield code="k">Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots.</subfield><subfield code="u">i</subfield><subfield code="y">z</subfield><subfield code="z">07-06-24</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="b">3844897186</subfield><subfield code="c">00</subfield><subfield code="f">--%%--</subfield><subfield code="d">--%%--</subfield><subfield code="e">--%%--</subfield><subfield code="j">n</subfield><subfield code="y">l01</subfield><subfield code="z">29-01-21</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="y">E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=5114422</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=5114422</subfield></datafield><datafield tag="995" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="a">olr-dda ebc</subfield></datafield></record></collection>
|
| score |
7.165475 |