4th Asia Conference on Mechanical and Materials Engineering
Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia.
Gespeichert in:
| Autor*in: |
Abdul Shukor, Mohd Hamdi [verfasserIn] Gong, Hao [mitwirkender] |
|---|
| Format: |
E-Book |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
Zurich: Trans Tech Publications, Limited ; 2016 ©2017 |
|---|
| Schlagwörter: |
|---|
| Anmerkung: |
Description based on publisher supplied metadata and other sources |
|---|---|
| Umfang: |
1 online resource (153 pages) |
| Reihe: |
Materials Science Forum Ser. ; v.Volume 880 |
|---|
| Links: | |
|---|---|
| ISBN: |
978-3-0357-0235-4 |
| Katalog-ID: |
1733921222 |
|---|
| LEADER | 01000cam a22002652 4500 | ||
|---|---|---|---|
| 001 | 1733921222 | ||
| 003 | DE-627 | ||
| 005 | 20221229130139.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 200929s2016 xx |||||o 00| ||eng c | ||
| 020 | |a 9783035702354 |9 978-3-0357-0235-4 | ||
| 035 | |a (DE-627)1733921222 | ||
| 035 | |a (DE-599)KEP035379170 | ||
| 035 | |a (EBL)EBL4761084 | ||
| 035 | |a (EBR)ebr11387702 | ||
| 035 | |a (EBC)EBC4761084 | ||
| 035 | |a (EBP)035379170 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rda | ||
| 041 | |a eng | ||
| 082 | 0 | |a 620.11 | |
| 100 | 1 | |a Abdul Shukor, Mohd Hamdi |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a 4th Asia Conference on Mechanical and Materials Engineering |
| 264 | 1 | |a Zurich |b Trans Tech Publications, Limited |c 2016 | |
| 264 | 4 | |c ©2017 | |
| 300 | |a 1 online resource (153 pages) | ||
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a Computermedien |b c |2 rdamedia | ||
| 338 | |a Online-Ressource |b cr |2 rdacarrier | ||
| 490 | 0 | |a Materials Science Forum Ser. |v v.Volume 880 | |
| 500 | |a Description based on publisher supplied metadata and other sources | ||
| 520 | |a Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. | ||
| 520 | |a Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. | ||
| 650 | 0 | |a Materials--Congresses | |
| 650 | 4 | |a Materials ; Congresses | |
| 650 | 4 | |a Electronic books | |
| 700 | 1 | |a Gong, Hao |e mitwirkender |4 ctb | |
| 776 | 1 | |z 9783038357445 | |
| 776 | 0 | 8 | |i Erscheint auch als |n Druck-Ausgabe |z 9783038357445 |
| 856 | 4 | 0 | |u https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084 |m X:EBC |x Aggregator |z lizenzpflichtig |
| 856 | 4 | 2 | |u http://www.gbv.de/dms/bowker/toc/9783035702354.pdf |v 2022-12-29 |x Aggregator |3 Inhaltsverzeichnis |
| 912 | |a ZDB-30-PQE | ||
| 912 | |a GBV_ILN_370 | ||
| 912 | |a ISIL_DE-1373 | ||
| 912 | |a SYSFLAG_1 | ||
| 912 | |a GBV_KXP | ||
| 912 | |a GBV_ILN_2021 | ||
| 912 | |a ISIL_DE-289 | ||
| 951 | |a BO | ||
| 953 | |2 045F |a 620.11 | ||
| 980 | |2 370 |1 01 |x 4370 |b 4535688362 |h olr-dda ebc |k Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. |u i |y z |z 07-06-24 | ||
| 980 | |2 2021 |1 01 |x DE-289 |b 3845087463 |c 00 |f --%%-- |d --%%-- |e --%%-- |j n |y l01 |z 29-01-21 | ||
| 981 | |2 370 |1 01 |x 4370 |y E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich |r https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=4761084 | ||
| 981 | |2 2021 |1 01 |x DE-289 |r https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=4761084 | ||
| 995 | |2 370 |1 01 |x 4370 |a olr-dda ebc | ||
| author_variant |
s m h a smh smha |
|---|---|
| matchkey_str |
book:9783035702354:2016---- |
| hierarchy_sort_str |
2016 |
| publishDate |
2016 |
| allfields |
9783035702354 978-3-0357-0235-4 (DE-627)1733921222 (DE-599)KEP035379170 (EBL)EBL4761084 (EBR)ebr11387702 (EBC)EBC4761084 (EBP)035379170 DE-627 ger DE-627 rda eng 620.11 Abdul Shukor, Mohd Hamdi verfasserin aut 4th Asia Conference on Mechanical and Materials Engineering Zurich Trans Tech Publications, Limited 2016 ©2017 1 online resource (153 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Materials Science Forum Ser. v.Volume 880 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. Materials--Congresses Materials ; Congresses Electronic books Gong, Hao mitwirkender ctb 9783038357445 Erscheint auch als Druck-Ausgabe 9783038357445 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035702354.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 370 01 4370 4535688362 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3845087463 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=4761084 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=4761084 370 01 4370 olr-dda ebc |
| spelling |
9783035702354 978-3-0357-0235-4 (DE-627)1733921222 (DE-599)KEP035379170 (EBL)EBL4761084 (EBR)ebr11387702 (EBC)EBC4761084 (EBP)035379170 DE-627 ger DE-627 rda eng 620.11 Abdul Shukor, Mohd Hamdi verfasserin aut 4th Asia Conference on Mechanical and Materials Engineering Zurich Trans Tech Publications, Limited 2016 ©2017 1 online resource (153 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Materials Science Forum Ser. v.Volume 880 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. Materials--Congresses Materials ; Congresses Electronic books Gong, Hao mitwirkender ctb 9783038357445 Erscheint auch als Druck-Ausgabe 9783038357445 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035702354.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 370 01 4370 4535688362 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3845087463 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=4761084 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=4761084 370 01 4370 olr-dda ebc |
| allfields_unstemmed |
9783035702354 978-3-0357-0235-4 (DE-627)1733921222 (DE-599)KEP035379170 (EBL)EBL4761084 (EBR)ebr11387702 (EBC)EBC4761084 (EBP)035379170 DE-627 ger DE-627 rda eng 620.11 Abdul Shukor, Mohd Hamdi verfasserin aut 4th Asia Conference on Mechanical and Materials Engineering Zurich Trans Tech Publications, Limited 2016 ©2017 1 online resource (153 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Materials Science Forum Ser. v.Volume 880 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. Materials--Congresses Materials ; Congresses Electronic books Gong, Hao mitwirkender ctb 9783038357445 Erscheint auch als Druck-Ausgabe 9783038357445 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035702354.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 370 01 4370 4535688362 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3845087463 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=4761084 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=4761084 370 01 4370 olr-dda ebc |
| allfieldsGer |
9783035702354 978-3-0357-0235-4 (DE-627)1733921222 (DE-599)KEP035379170 (EBL)EBL4761084 (EBR)ebr11387702 (EBC)EBC4761084 (EBP)035379170 DE-627 ger DE-627 rda eng 620.11 Abdul Shukor, Mohd Hamdi verfasserin aut 4th Asia Conference on Mechanical and Materials Engineering Zurich Trans Tech Publications, Limited 2016 ©2017 1 online resource (153 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Materials Science Forum Ser. v.Volume 880 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. Materials--Congresses Materials ; Congresses Electronic books Gong, Hao mitwirkender ctb 9783038357445 Erscheint auch als Druck-Ausgabe 9783038357445 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035702354.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 370 01 4370 4535688362 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3845087463 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=4761084 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=4761084 370 01 4370 olr-dda ebc |
| allfieldsSound |
9783035702354 978-3-0357-0235-4 (DE-627)1733921222 (DE-599)KEP035379170 (EBL)EBL4761084 (EBR)ebr11387702 (EBC)EBC4761084 (EBP)035379170 DE-627 ger DE-627 rda eng 620.11 Abdul Shukor, Mohd Hamdi verfasserin aut 4th Asia Conference on Mechanical and Materials Engineering Zurich Trans Tech Publications, Limited 2016 ©2017 1 online resource (153 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Materials Science Forum Ser. v.Volume 880 Description based on publisher supplied metadata and other sources Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. Materials--Congresses Materials ; Congresses Electronic books Gong, Hao mitwirkender ctb 9783038357445 Erscheint auch als Druck-Ausgabe 9783038357445 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035702354.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 370 01 4370 4535688362 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 2021 01 DE-289 3845087463 00 --%%-- --%%-- --%%-- n l01 29-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=4761084 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=4761084 370 01 4370 olr-dda ebc |
| language |
English |
| format_phy_str_mv |
Book |
| building |
370 2021:0 |
| institution |
findex.gbv.de |
| selectbib_iln_str_mv |
370@ 2021@01 |
| topic_facet |
Materials--Congresses Materials ; Congresses Electronic books |
| dewey-raw |
620.11 |
| isfreeaccess_bool |
false |
| authorswithroles_txt_mv |
Abdul Shukor, Mohd Hamdi @@aut@@ Gong, Hao @@ctb@@ |
| publishDateDaySort_date |
2016-01-01T00:00:00Z |
| dewey-sort |
3620.11 |
| id |
1733921222 |
| language_de |
englisch |
| standort_str_mv |
--%%-- |
| series2 |
Materials Science Forum Ser. |
| standort_iln_str_mv |
2021:--%%-- DE-289:--%%-- |
| author |
Abdul Shukor, Mohd Hamdi |
| spellingShingle |
Abdul Shukor, Mohd Hamdi ddc 620.11 misc Materials--Congresses misc Materials ; Congresses misc Electronic books 4th Asia Conference on Mechanical and Materials Engineering |
| authorStr |
Abdul Shukor, Mohd Hamdi |
| format |
eBook |
| dewey-ones |
620 - Engineering & allied operations |
| delete_txt_mv |
keep |
| author_role |
aut |
| collection |
KXP GVK SWB |
| publishPlace |
Zurich |
| remote_str |
true |
| abrufzeichen_iln_str_mv |
370@olr-dda ebc |
| abrufzeichen_iln_scis_mv |
370@olr-dda ebc |
| last_changed_iln_str_mv |
370@07-06-24 2021@29-01-21 |
| illustrated |
Not Illustrated |
| topic_title |
620.11 4th Asia Conference on Mechanical and Materials Engineering Materials--Congresses Materials ; Congresses Electronic books |
| publisher |
Trans Tech Publications, Limited |
| publisherStr |
Trans Tech Publications, Limited |
| topic |
ddc 620.11 misc Materials--Congresses misc Materials ; Congresses misc Electronic books |
| topic_unstemmed |
ddc 620.11 misc Materials--Congresses misc Materials ; Congresses misc Electronic books |
| topic_browse |
ddc 620.11 misc Materials--Congresses misc Materials ; Congresses misc Electronic books |
| format_facet |
Elektronische Bücher Bücher Elektronische Ressource |
| standort_txtP_mv |
--%%-- |
| format_main_str_mv |
Text Buch |
| carriertype_str_mv |
cr |
| author2_variant |
h g hg |
| signature |
--%%-- |
| signature_str_mv |
--%%-- |
| dewey-tens |
620 - Engineering |
| isbn |
9783035702354 3035702357 9783038357445 3038357448 |
| isfreeaccess_txt |
false |
| title |
4th Asia Conference on Mechanical and Materials Engineering |
| ctrlnum |
(DE-627)1733921222 (DE-599)KEP035379170 (EBL)EBL4761084 (EBR)ebr11387702 (EBC)EBC4761084 (EBP)035379170 |
| exemplarkommentar_str_mv |
370@Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. |
| title_full |
4th Asia Conference on Mechanical and Materials Engineering |
| author_sort |
Abdul Shukor, Mohd Hamdi |
| callnumber-first-code |
- |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology |
| recordtype |
marc |
| publishDateSort |
2016 |
| contenttype_str_mv |
txt |
| author_browse |
Abdul Shukor, Mohd Hamdi |
| selectkey |
370:z 2021:l |
| physical |
1 online resource (153 pages) |
| class |
620.11 |
| format_se |
Elektronische Bücher |
| author-letter |
Abdul Shukor, Mohd Hamdi |
| dewey-full |
620.11 |
| author2-role |
mitwirkender |
| title_sort |
4th asia conference on mechanical and materials engineering |
| title_auth |
4th Asia Conference on Mechanical and Materials Engineering |
| abstract |
Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. Description based on publisher supplied metadata and other sources |
| abstractGer |
Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. Description based on publisher supplied metadata and other sources |
| abstract_unstemmed |
Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia. Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite. Description based on publisher supplied metadata and other sources |
| collection_details |
ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_2021 ISIL_DE-289 |
| title_short |
4th Asia Conference on Mechanical and Materials Engineering |
| url |
https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084 http://www.gbv.de/dms/bowker/toc/9783035702354.pdf |
| ausleihindikator_str_mv |
370 2021:- |
| remote_bool |
true |
| author2 |
Gong, Hao |
| author2Str |
Gong, Hao |
| mediatype_str_mv |
c |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| author2_role |
ctb |
| callnumber-a |
--%%-- |
| up_date |
2024-07-16T23:38:23.455Z |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000cam a22002652 4500</leader><controlfield tag="001">1733921222</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20221229130139.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">200929s2016 xx |||||o 00| ||eng c</controlfield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9783035702354</subfield><subfield code="9">978-3-0357-0235-4</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)1733921222</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)KEP035379170</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBL)EBL4761084</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBR)ebr11387702</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBC)EBC4761084</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBP)035379170</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">620.11</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Abdul Shukor, Mohd Hamdi</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">4th Asia Conference on Mechanical and Materials Engineering</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Zurich</subfield><subfield code="b">Trans Tech Publications, Limited</subfield><subfield code="c">2016</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2017</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (153 pages)</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="0" ind2=" "><subfield code="a">Materials Science Forum Ser.</subfield><subfield code="v">v.Volume 880</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">Description based on publisher supplied metadata and other sources</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials--Congresses</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Materials ; Congresses</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electronic books</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Gong, Hao</subfield><subfield code="e">mitwirkender</subfield><subfield code="4">ctb</subfield></datafield><datafield tag="776" ind1="1" ind2=" "><subfield code="z">9783038357445</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Erscheint auch als</subfield><subfield code="n">Druck-Ausgabe</subfield><subfield code="z">9783038357445</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084</subfield><subfield code="m">X:EBC</subfield><subfield code="x">Aggregator</subfield><subfield code="z">lizenzpflichtig</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://www.gbv.de/dms/bowker/toc/9783035702354.pdf</subfield><subfield code="v">2022-12-29</subfield><subfield code="x">Aggregator</subfield><subfield code="3">Inhaltsverzeichnis</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-30-PQE</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-1373</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_1</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_KXP</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-289</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">BO</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">620.11</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="b">4535688362</subfield><subfield code="h">olr-dda ebc</subfield><subfield code="k">Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots.</subfield><subfield code="u">i</subfield><subfield code="y">z</subfield><subfield code="z">07-06-24</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="b">3845087463</subfield><subfield code="c">00</subfield><subfield code="f">--%%--</subfield><subfield code="d">--%%--</subfield><subfield code="e">--%%--</subfield><subfield code="j">n</subfield><subfield code="y">l01</subfield><subfield code="z">29-01-21</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="y">E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=4761084</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=4761084</subfield></datafield><datafield tag="995" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="a">olr-dda ebc</subfield></datafield></record></collection>
|
| fulltext |
A Synthesize Protocol for Graphene Nanosheets … Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process … Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts … Enhanced Catalytic Activity of … ;-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis … Effect of Varying Root Gap on Butt Welding of … mm Thick AISI 1020 Plate by Autogenous TIG Welding Process … Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing … Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel … Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling … Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds … Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions … Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics … Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite … Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment … Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites … Processing of Black Sand for the Recovery of Metal … Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT … Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite … A Study on Free Vibrational Response of Functionally Graded Nanocomposite Sandwich Plates Reinforced by Randomly Oriented Straight Carbon Nanotubes … Comparative Assessment of Strength Models for AA6063 Alloy … Two-Scale Algorithm of Simulating the Approximation for the Piezoelectric Problem in Small Periodic Composites … Simply Electrospun Gelatin/Cellulose Acetate Nanofibers and their Physico-Chemical Characteristics … Development of Strand Burner Test by Using Aluminized AP/HTPB … Characteristics of Er2O3 Added ZnO-Based Varistor Ceramics … Study the Effect of Liquid Layer Level on the Formation of Zinc Oxide Nanoparticles Synthesized by Liquid-Phase Pulsed Laser Ablation … Detection of Polytetrafluoroethylene Coating Deposition in Carbon Composite Paper Surface PEMFC Using FTIR-ATR … Corrosion Inhibition of 6063 Aluminum Alloy in … M Sodium Hydroxide Medium by Aqueous Extract of Seeds of Garcinia indica … Experimental Analysis of Thermal Fatigue in Bimetallic Welds … Application of Neural Network for the Prediction of Tensile Properties of Friction Stir Welded Composites … High Performance Fabrics in Body Protective Systems … Influence of Spheroidizing Heat Treatment on Mechanical Properties of EN47 Steel … Metallography&Bulk Hardness of Artificially Aged Al6061-B4C-SiC Stir Cast Hybrid Composites … |
| _version_ |
1804780808135770112 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000cam a22002652 4500</leader><controlfield tag="001">1733921222</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20221229130139.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">200929s2016 xx |||||o 00| ||eng c</controlfield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9783035702354</subfield><subfield code="9">978-3-0357-0235-4</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)1733921222</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)KEP035379170</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBL)EBL4761084</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBR)ebr11387702</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBC)EBC4761084</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBP)035379170</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">620.11</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Abdul Shukor, Mohd Hamdi</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">4th Asia Conference on Mechanical and Materials Engineering</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Zurich</subfield><subfield code="b">Trans Tech Publications, Limited</subfield><subfield code="c">2016</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2017</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (153 pages)</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="0" ind2=" "><subfield code="a">Materials Science Forum Ser.</subfield><subfield code="v">v.Volume 880</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">Description based on publisher supplied metadata and other sources</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Selected, peer reviewed papers from the 4th Asia Conference on Mechanical and Materials Engineering, July 14-18, 2016, Kuala Lumpur, Malaysia.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Intro -- 4th Asia Conference on Mechanical and Materials Engineering -- Preface, Committees -- Table of Contents -- Chapter 1: Manufacturing and Synthesis of Materials -- A Synthesize Protocol for Graphene Nanosheets -- Production of Cenospheres from Coal Fly Ash through Vertical Thermal Flame (VTF) Process -- Electrospun Polyvinylpyrrolidone (PVP) Nanofiber Mats Loaded by Garcinia mangostana L. Extracts -- Enhanced Catalytic Activity of α-Fe2O3 with the Adsorption of Gases for Ammonia Synthesis -- Chapter 2: Materials Processing -- Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process -- Microstructural Modification of Non-Combustible Magnesium Alloy by Friction Stir Processing -- Hydrogen Assisted Tempered Martensite Embrittlement of Ultra High Strength Martensitic Steel -- Effect of Drilling Parameters on Hole Quality of Ti-6Al-4V Titanium Alloy in Dry Drilling -- Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds -- Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions -- Effect of Low Doses Gamma and Electron Irradiation on Mechanical Strength of Bi2Sr2CaCu2O8 (Bi-2212) Superconductor Ceramics -- Influence of Welding Process Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Matrix Composite -- Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment -- Effect of Artificial Aging on Fracture Behavior of Al6061-Silica (SiO2) Composites -- Processing of Black Sand for the Recovery of Metal -- Chapter 3: Research and Testing of Materials -- Electrical Conductivity of BioBased Shape Memory Polyurethane Filled with CNT -- Tensile Properties of Ground Coffee Waste Reinforced Polyethylene Composite.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Materials--Congresses</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Materials ; Congresses</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electronic books</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Gong, Hao</subfield><subfield code="e">mitwirkender</subfield><subfield code="4">ctb</subfield></datafield><datafield tag="776" ind1="1" ind2=" "><subfield code="z">9783038357445</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Erscheint auch als</subfield><subfield code="n">Druck-Ausgabe</subfield><subfield code="z">9783038357445</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=4761084</subfield><subfield code="m">X:EBC</subfield><subfield code="x">Aggregator</subfield><subfield code="z">lizenzpflichtig</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://www.gbv.de/dms/bowker/toc/9783035702354.pdf</subfield><subfield code="v">2022-12-29</subfield><subfield code="x">Aggregator</subfield><subfield code="3">Inhaltsverzeichnis</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-30-PQE</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-1373</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_1</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_KXP</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-289</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">BO</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">620.11</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="b">4535688362</subfield><subfield code="h">olr-dda ebc</subfield><subfield code="k">Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots.</subfield><subfield code="u">i</subfield><subfield code="y">z</subfield><subfield code="z">07-06-24</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="b">3845087463</subfield><subfield code="c">00</subfield><subfield code="f">--%%--</subfield><subfield code="d">--%%--</subfield><subfield code="e">--%%--</subfield><subfield code="j">n</subfield><subfield code="y">l01</subfield><subfield code="z">29-01-21</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="y">E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=4761084</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=4761084</subfield></datafield><datafield tag="995" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="a">olr-dda ebc</subfield></datafield></record></collection>
|
| score |
7.167921 |