Metallurgy Technology and Materials VIII
Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China.
Gespeichert in:
| Autor*in: |
Mohamed, Nor Sabirin [verfasserIn] |
|---|
| Format: |
E-Book |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
Zurich: Trans Tech Publications, Limited ; 2021 ©2021 |
|---|
| Schlagwörter: |
|---|
| Anmerkung: |
Description based on publisher supplied metadata and other sources |
|---|---|
| Umfang: |
1 online resource (144 pages) |
| Reihe: |
Solid State Phenomena Ser. ; v.Volume 315 |
|---|
| Links: | |
|---|---|
| ISBN: |
978-3-0357-3700-4 |
| Katalog-ID: |
1743927371 |
|---|
| LEADER | 01000cam a22002652 4500 | ||
|---|---|---|---|
| 001 | 1743927371 | ||
| 003 | DE-627 | ||
| 005 | 20230907130921.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 210105s2021 xx |||||o 00| ||eng c | ||
| 020 | |a 9783035737004 |9 978-3-0357-3700-4 | ||
| 035 | |a (DE-627)1743927371 | ||
| 035 | |a (DE-599)KEP060783060 | ||
| 035 | |a (EBL)EBL6427666 | ||
| 035 | |a (EBC)EBC6427666 | ||
| 035 | |a (EBP)060783060 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rda | ||
| 041 | |a eng | ||
| 082 | 0 | |a 620.11 | |
| 082 | 0 | |a 669 | |
| 100 | 1 | |a Mohamed, Nor Sabirin |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Metallurgy Technology and Materials VIII |
| 264 | 1 | |a Zurich |b Trans Tech Publications, Limited |c 2021 | |
| 264 | 4 | |c ©2021 | |
| 300 | |a 1 online resource (144 pages) | ||
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a Computermedien |b c |2 rdamedia | ||
| 338 | |a Online-Ressource |b cr |2 rdacarrier | ||
| 490 | 0 | |a Solid State Phenomena Ser. |v v.Volume 315 | |
| 500 | |a Description based on publisher supplied metadata and other sources | ||
| 520 | |a Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. | ||
| 520 | |a Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. | ||
| 650 | 0 | |a Alloy.. | |
| 650 | 0 | |a Biomass Processing.. | |
| 650 | 0 | |a Aging | |
| 650 | 4 | |a Electronic books | |
| 776 | 1 | |z 9783035717006 | |
| 776 | 0 | 8 | |i Erscheint auch als |n Druck-Ausgabe |z 9783035717006 |
| 856 | 4 | 0 | |u https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666 |m X:EBC |x Aggregator |z lizenzpflichtig |
| 856 | 4 | 2 | |u http://www.gbv.de/dms/bowker/toc/9783035737004.pdf |v 2022-12-29 |x Aggregator |3 Inhaltsverzeichnis |
| 912 | |a ZDB-30-PQE | ||
| 912 | |a GBV_ILN_370 | ||
| 912 | |a ISIL_DE-1373 | ||
| 912 | |a SYSFLAG_1 | ||
| 912 | |a GBV_KXP | ||
| 912 | |a GBV_ILN_736 | ||
| 912 | |a GBV_ILN_2020 | ||
| 912 | |a ISIL_DE-Ch1 | ||
| 912 | |a GBV_ILN_2021 | ||
| 912 | |a ISIL_DE-289 | ||
| 951 | |a BO | ||
| 953 | |2 045F |a 620.11 | ||
| 953 | |2 045F |a 669 | ||
| 980 | |2 370 |1 01 |x 4370 |b 4535688885 |h olr-dda ebc |k Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. |u i |y z |z 07-06-24 | ||
| 980 | |2 736 |1 01 |x 4736 |b 3830533195 |h EBC-Content |y zeg |z 05-01-21 | ||
| 980 | |2 2020 |1 01 |x DE-Ch1 |b 4353596403 |c 00 |f --%%-- |d --%%-- |e n |j n |k Campuslizenz |y l01 |z 13-07-23 | ||
| 980 | |2 2021 |1 01 |x DE-289 |b 3843981922 |c 00 |f --%%-- |d --%%-- |e --%%-- |j n |y l01 |z 28-01-21 | ||
| 981 | |2 370 |1 01 |x 4370 |y E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich |r https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=6427666 | ||
| 981 | |2 736 |1 01 |x 4736 |r https://ebookcentral.proquest.com/lib/staat/detail.action?docID=6427666 | ||
| 981 | |2 2020 |1 01 |x DE-Ch1 |r https://ebookcentral.proquest.com/lib/tuchemnitz/detail.action?docID=6427666 | ||
| 981 | |2 2021 |1 01 |x DE-289 |r https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=6427666 | ||
| 995 | |2 370 |1 01 |x 4370 |a olr-dda ebc | ||
| 995 | |2 736 |1 01 |x 4736 |a EBC-Content | ||
| author_variant |
n s m ns nsm |
|---|---|
| matchkey_str |
book:9783035737004:2021---- |
| hierarchy_sort_str |
2021 |
| publishDate |
2021 |
| allfields |
9783035737004 978-3-0357-3700-4 (DE-627)1743927371 (DE-599)KEP060783060 (EBL)EBL6427666 (EBC)EBC6427666 (EBP)060783060 DE-627 ger DE-627 rda eng 620.11 669 Mohamed, Nor Sabirin verfasserin aut Metallurgy Technology and Materials VIII Zurich Trans Tech Publications, Limited 2021 ©2021 1 online resource (144 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Solid State Phenomena Ser. v.Volume 315 Description based on publisher supplied metadata and other sources Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. Alloy.. Biomass Processing.. Aging Electronic books 9783035717006 Erscheint auch als Druck-Ausgabe 9783035717006 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035737004.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_736 GBV_ILN_2020 ISIL_DE-Ch1 GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 045F 669 370 01 4370 4535688885 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 736 01 4736 3830533195 EBC-Content zeg 05-01-21 2020 01 DE-Ch1 4353596403 00 --%%-- --%%-- n n Campuslizenz l01 13-07-23 2021 01 DE-289 3843981922 00 --%%-- --%%-- --%%-- n l01 28-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=6427666 736 01 4736 https://ebookcentral.proquest.com/lib/staat/detail.action?docID=6427666 2020 01 DE-Ch1 https://ebookcentral.proquest.com/lib/tuchemnitz/detail.action?docID=6427666 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=6427666 370 01 4370 olr-dda ebc 736 01 4736 EBC-Content |
| spelling |
9783035737004 978-3-0357-3700-4 (DE-627)1743927371 (DE-599)KEP060783060 (EBL)EBL6427666 (EBC)EBC6427666 (EBP)060783060 DE-627 ger DE-627 rda eng 620.11 669 Mohamed, Nor Sabirin verfasserin aut Metallurgy Technology and Materials VIII Zurich Trans Tech Publications, Limited 2021 ©2021 1 online resource (144 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Solid State Phenomena Ser. v.Volume 315 Description based on publisher supplied metadata and other sources Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. Alloy.. Biomass Processing.. Aging Electronic books 9783035717006 Erscheint auch als Druck-Ausgabe 9783035717006 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035737004.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_736 GBV_ILN_2020 ISIL_DE-Ch1 GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 045F 669 370 01 4370 4535688885 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 736 01 4736 3830533195 EBC-Content zeg 05-01-21 2020 01 DE-Ch1 4353596403 00 --%%-- --%%-- n n Campuslizenz l01 13-07-23 2021 01 DE-289 3843981922 00 --%%-- --%%-- --%%-- n l01 28-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=6427666 736 01 4736 https://ebookcentral.proquest.com/lib/staat/detail.action?docID=6427666 2020 01 DE-Ch1 https://ebookcentral.proquest.com/lib/tuchemnitz/detail.action?docID=6427666 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=6427666 370 01 4370 olr-dda ebc 736 01 4736 EBC-Content |
| allfields_unstemmed |
9783035737004 978-3-0357-3700-4 (DE-627)1743927371 (DE-599)KEP060783060 (EBL)EBL6427666 (EBC)EBC6427666 (EBP)060783060 DE-627 ger DE-627 rda eng 620.11 669 Mohamed, Nor Sabirin verfasserin aut Metallurgy Technology and Materials VIII Zurich Trans Tech Publications, Limited 2021 ©2021 1 online resource (144 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Solid State Phenomena Ser. v.Volume 315 Description based on publisher supplied metadata and other sources Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. Alloy.. Biomass Processing.. Aging Electronic books 9783035717006 Erscheint auch als Druck-Ausgabe 9783035717006 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035737004.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_736 GBV_ILN_2020 ISIL_DE-Ch1 GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 045F 669 370 01 4370 4535688885 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 736 01 4736 3830533195 EBC-Content zeg 05-01-21 2020 01 DE-Ch1 4353596403 00 --%%-- --%%-- n n Campuslizenz l01 13-07-23 2021 01 DE-289 3843981922 00 --%%-- --%%-- --%%-- n l01 28-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=6427666 736 01 4736 https://ebookcentral.proquest.com/lib/staat/detail.action?docID=6427666 2020 01 DE-Ch1 https://ebookcentral.proquest.com/lib/tuchemnitz/detail.action?docID=6427666 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=6427666 370 01 4370 olr-dda ebc 736 01 4736 EBC-Content |
| allfieldsGer |
9783035737004 978-3-0357-3700-4 (DE-627)1743927371 (DE-599)KEP060783060 (EBL)EBL6427666 (EBC)EBC6427666 (EBP)060783060 DE-627 ger DE-627 rda eng 620.11 669 Mohamed, Nor Sabirin verfasserin aut Metallurgy Technology and Materials VIII Zurich Trans Tech Publications, Limited 2021 ©2021 1 online resource (144 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Solid State Phenomena Ser. v.Volume 315 Description based on publisher supplied metadata and other sources Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. Alloy.. Biomass Processing.. Aging Electronic books 9783035717006 Erscheint auch als Druck-Ausgabe 9783035717006 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035737004.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_736 GBV_ILN_2020 ISIL_DE-Ch1 GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 045F 669 370 01 4370 4535688885 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 736 01 4736 3830533195 EBC-Content zeg 05-01-21 2020 01 DE-Ch1 4353596403 00 --%%-- --%%-- n n Campuslizenz l01 13-07-23 2021 01 DE-289 3843981922 00 --%%-- --%%-- --%%-- n l01 28-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=6427666 736 01 4736 https://ebookcentral.proquest.com/lib/staat/detail.action?docID=6427666 2020 01 DE-Ch1 https://ebookcentral.proquest.com/lib/tuchemnitz/detail.action?docID=6427666 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=6427666 370 01 4370 olr-dda ebc 736 01 4736 EBC-Content |
| allfieldsSound |
9783035737004 978-3-0357-3700-4 (DE-627)1743927371 (DE-599)KEP060783060 (EBL)EBL6427666 (EBC)EBC6427666 (EBP)060783060 DE-627 ger DE-627 rda eng 620.11 669 Mohamed, Nor Sabirin verfasserin aut Metallurgy Technology and Materials VIII Zurich Trans Tech Publications, Limited 2021 ©2021 1 online resource (144 pages) Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Solid State Phenomena Ser. v.Volume 315 Description based on publisher supplied metadata and other sources Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. Alloy.. Biomass Processing.. Aging Electronic books 9783035717006 Erscheint auch als Druck-Ausgabe 9783035717006 https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666 X:EBC Aggregator lizenzpflichtig http://www.gbv.de/dms/bowker/toc/9783035737004.pdf 2022-12-29 Aggregator Inhaltsverzeichnis ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_736 GBV_ILN_2020 ISIL_DE-Ch1 GBV_ILN_2021 ISIL_DE-289 BO 045F 620.11 045F 669 370 01 4370 4535688885 olr-dda ebc Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. i z 07-06-24 736 01 4736 3830533195 EBC-Content zeg 05-01-21 2020 01 DE-Ch1 4353596403 00 --%%-- --%%-- n n Campuslizenz l01 13-07-23 2021 01 DE-289 3843981922 00 --%%-- --%%-- --%%-- n l01 28-01-21 370 01 4370 E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=6427666 736 01 4736 https://ebookcentral.proquest.com/lib/staat/detail.action?docID=6427666 2020 01 DE-Ch1 https://ebookcentral.proquest.com/lib/tuchemnitz/detail.action?docID=6427666 2021 01 DE-289 https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=6427666 370 01 4370 olr-dda ebc 736 01 4736 EBC-Content |
| language |
English |
| format_phy_str_mv |
Book |
| building |
370 736:e 2020:0 2021:0 |
| institution |
findex.gbv.de |
| selectbib_iln_str_mv |
370@ 736@eg 2020@01 2021@01 |
| topic_facet |
Alloy.. Biomass Processing.. Aging Electronic books |
| dewey-raw |
620.11 |
| isfreeaccess_bool |
false |
| authorswithroles_txt_mv |
Mohamed, Nor Sabirin @@aut@@ |
| publishDateDaySort_date |
2021-01-01T00:00:00Z |
| dewey-sort |
3620.11 |
| id |
1743927371 |
| language_de |
englisch |
| standort_str_mv |
--%%-- |
| series2 |
Solid State Phenomena Ser. |
| standort_iln_str_mv |
2020:--%%-- DE-Ch1:--%%-- 2021:--%%-- DE-289:--%%-- |
| author |
Mohamed, Nor Sabirin |
| spellingShingle |
Mohamed, Nor Sabirin ddc 620.11 ddc 669 misc Alloy.. misc Biomass Processing.. misc Aging misc Electronic books Metallurgy Technology and Materials VIII |
| authorStr |
Mohamed, Nor Sabirin |
| format |
eBook |
| dewey-ones |
620 - Engineering & allied operations 669 - Metallurgy |
| delete_txt_mv |
keep |
| author_role |
aut |
| collection |
KXP GVK SWB |
| publishPlace |
Zurich |
| remote_str |
true |
| abrufzeichen_iln_str_mv |
370@olr-dda ebc 736@EBC-Content |
| abrufzeichen_iln_scis_mv |
370@olr-dda ebc 736@EBC-Content |
| last_changed_iln_str_mv |
370@07-06-24 736@05-01-21 2020@13-07-23 2021@28-01-21 |
| illustrated |
Not Illustrated |
| topic_title |
620.11 669 Metallurgy Technology and Materials VIII Alloy Biomass Processing Aging Electronic books |
| publisher |
Trans Tech Publications, Limited |
| publisherStr |
Trans Tech Publications, Limited |
| topic |
ddc 620.11 ddc 669 misc Alloy.. misc Biomass Processing.. misc Aging misc Electronic books |
| topic_unstemmed |
ddc 620.11 ddc 669 misc Alloy.. misc Biomass Processing.. misc Aging misc Electronic books |
| topic_browse |
ddc 620.11 ddc 669 misc Alloy.. misc Biomass Processing.. misc Aging misc Electronic books |
| format_facet |
Elektronische Bücher Bücher Elektronische Ressource |
| standort_txtP_mv |
--%%-- |
| format_main_str_mv |
Text Buch |
| carriertype_str_mv |
cr |
| signature |
--%%-- |
| signature_str_mv |
--%%-- |
| dewey-tens |
620 - Engineering 660 - Chemical engineering |
| isbn |
9783035737004 3035737002 9783035717006 3035717001 |
| isfreeaccess_txt |
false |
| title |
Metallurgy Technology and Materials VIII |
| ctrlnum |
(DE-627)1743927371 (DE-599)KEP060783060 (EBL)EBL6427666 (EBC)EBC6427666 (EBP)060783060 |
| exemplarkommentar_str_mv |
370@Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots. 2020@Campuslizenz |
| title_full |
Metallurgy Technology and Materials VIII |
| author_sort |
Mohamed, Nor Sabirin |
| callnumber-first-code |
- |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology |
| recordtype |
marc |
| publishDateSort |
2021 |
| contenttype_str_mv |
txt |
| author_browse |
Mohamed, Nor Sabirin |
| selectkey |
370:z 736:z 2020:l 2021:l |
| physical |
1 online resource (144 pages) |
| class |
620.11 669 |
| format_se |
Elektronische Bücher |
| author-letter |
Mohamed, Nor Sabirin |
| dewey-full |
620.11 669 |
| title_sort |
metallurgy technology and materials viii |
| title_auth |
Metallurgy Technology and Materials VIII |
| abstract |
Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. Description based on publisher supplied metadata and other sources |
| abstractGer |
Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. Description based on publisher supplied metadata and other sources |
| abstract_unstemmed |
Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China. Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection. Description based on publisher supplied metadata and other sources |
| collection_details |
ZDB-30-PQE GBV_ILN_370 ISIL_DE-1373 SYSFLAG_1 GBV_KXP GBV_ILN_736 GBV_ILN_2020 ISIL_DE-Ch1 GBV_ILN_2021 ISIL_DE-289 |
| title_short |
Metallurgy Technology and Materials VIII |
| url |
https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666 http://www.gbv.de/dms/bowker/toc/9783035737004.pdf |
| ausleihindikator_str_mv |
370 736 2020:n 2021:- |
| remote_bool |
true |
| mediatype_str_mv |
c |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| callnumber-a |
--%%-- |
| up_date |
2024-07-17T02:26:45.436Z |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000cam a22002652 4500</leader><controlfield tag="001">1743927371</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230907130921.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">210105s2021 xx |||||o 00| ||eng c</controlfield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9783035737004</subfield><subfield code="9">978-3-0357-3700-4</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)1743927371</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)KEP060783060</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBL)EBL6427666</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBC)EBC6427666</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBP)060783060</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">620.11</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">669</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Mohamed, Nor Sabirin</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Metallurgy Technology and Materials VIII</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Zurich</subfield><subfield code="b">Trans Tech Publications, Limited</subfield><subfield code="c">2021</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2021</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (144 pages)</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="0" ind2=" "><subfield code="a">Solid State Phenomena Ser.</subfield><subfield code="v">v.Volume 315</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">Description based on publisher supplied metadata and other sources</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Alloy..</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Biomass Processing..</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Aging</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electronic books</subfield></datafield><datafield tag="776" ind1="1" ind2=" "><subfield code="z">9783035717006</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Erscheint auch als</subfield><subfield code="n">Druck-Ausgabe</subfield><subfield code="z">9783035717006</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666</subfield><subfield code="m">X:EBC</subfield><subfield code="x">Aggregator</subfield><subfield code="z">lizenzpflichtig</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://www.gbv.de/dms/bowker/toc/9783035737004.pdf</subfield><subfield code="v">2022-12-29</subfield><subfield code="x">Aggregator</subfield><subfield code="3">Inhaltsverzeichnis</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-30-PQE</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-1373</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_1</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_KXP</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_736</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-Ch1</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-289</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">BO</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">620.11</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">669</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="b">4535688885</subfield><subfield code="h">olr-dda ebc</subfield><subfield code="k">Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots.</subfield><subfield code="u">i</subfield><subfield code="y">z</subfield><subfield code="z">07-06-24</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">736</subfield><subfield code="1">01</subfield><subfield code="x">4736</subfield><subfield code="b">3830533195</subfield><subfield code="h">EBC-Content</subfield><subfield code="y">zeg</subfield><subfield code="z">05-01-21</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">2020</subfield><subfield code="1">01</subfield><subfield code="x">DE-Ch1</subfield><subfield code="b">4353596403</subfield><subfield code="c">00</subfield><subfield code="f">--%%--</subfield><subfield code="d">--%%--</subfield><subfield code="e">n</subfield><subfield code="j">n</subfield><subfield code="k">Campuslizenz</subfield><subfield code="y">l01</subfield><subfield code="z">13-07-23</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="b">3843981922</subfield><subfield code="c">00</subfield><subfield code="f">--%%--</subfield><subfield code="d">--%%--</subfield><subfield code="e">--%%--</subfield><subfield code="j">n</subfield><subfield code="y">l01</subfield><subfield code="z">28-01-21</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="y">E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=6427666</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">736</subfield><subfield code="1">01</subfield><subfield code="x">4736</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/staat/detail.action?docID=6427666</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">2020</subfield><subfield code="1">01</subfield><subfield code="x">DE-Ch1</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/tuchemnitz/detail.action?docID=6427666</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=6427666</subfield></datafield><datafield tag="995" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="a">olr-dda ebc</subfield></datafield><datafield tag="995" ind1=" " ind2=" "><subfield code="2">736</subfield><subfield code="1">01</subfield><subfield code="x">4736</subfield><subfield code="a">EBC-Content</subfield></datafield></record></collection>
|
| fulltext |
Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process … The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle … Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization … Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy … Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy … Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy … Damping Performance of Material Candidates for Service at 350K … A Calculation Method for the Coupling of Temperature and Concentration during Inconel … Alloy Solidification … The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys … The Phase Constitutes of Ti-Mo-Based Alloys … Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels … Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water … Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel … Superalloy Disc … Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel … Superalloy … Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety … Detection of Hydrogen Damage in … 25Cr1Mo0.25V by Ultrasonic Inspection … Some Issues of Repairing Manned Space Vehicles in Outer Space Using Electron Beam Welding … Insights into the Self-Optimized Hydrophobicity of Cerium Oxide Surface under Impact Abrasive Wear … Thermal Properties of High Density Polyethylene/Poly(Vinyl Alcohol) Fiber Composites Prepared Using Laboratory Mixing Extruder … Research on Vibrating L-Box Test and Yield Value of Low Water-Cement Ratio Concrete … Influence of Cellulose Fiber Content on Morphology and Properties of Poly(Lactic Acid)/Propylene-Ethylene Copolymer/Cellulose Composites … |
| _version_ |
1804791400826404864 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000cam a22002652 4500</leader><controlfield tag="001">1743927371</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230907130921.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">210105s2021 xx |||||o 00| ||eng c</controlfield><datafield tag="020" ind1=" " ind2=" "><subfield code="a">9783035737004</subfield><subfield code="9">978-3-0357-3700-4</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)1743927371</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)KEP060783060</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBL)EBL6427666</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBC)EBC6427666</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(EBP)060783060</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">620.11</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">669</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Mohamed, Nor Sabirin</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Metallurgy Technology and Materials VIII</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="a">Zurich</subfield><subfield code="b">Trans Tech Publications, Limited</subfield><subfield code="c">2021</subfield></datafield><datafield tag="264" ind1=" " ind2="4"><subfield code="c">©2021</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">1 online resource (144 pages)</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="490" ind1="0" ind2=" "><subfield code="a">Solid State Phenomena Ser.</subfield><subfield code="v">v.Volume 315</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">Description based on publisher supplied metadata and other sources</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Intro -- Metallurgy Technology and Materials VIII -- Preface -- Table of Contents -- Chapter 1: Properties and Processing Technologies of Structural Steel and Alloys -- Simulation and Optimization of Temperature Field of Tank Cover with Super Large Diameter during the Creep Aging Forming Process -- The Study on Porosity Controllable Filter Material for the Integrated Gasification Combined Cycle -- Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization -- Effect of Cast and Heat Treatment Processes on Microstructure and Properties of K4169 Superalloy -- Anisotropy in Compression Creep-Ageing Behavior of 2219-T3 Aluminum Alloy -- Investigation on the Stress Relaxation Aging Behavior of 2195 Al-Li Alloy -- Damping Performance of Material Candidates for Service at 350K -- A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification -- The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys -- The Phase Constitutes of Ti-Mo-Based Alloys -- Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels -- Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water -- Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc -- Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy -- Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety -- Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection.</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Alloy..</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Biomass Processing..</subfield></datafield><datafield tag="650" ind1=" " ind2="0"><subfield code="a">Aging</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electronic books</subfield></datafield><datafield tag="776" ind1="1" ind2=" "><subfield code="z">9783035717006</subfield></datafield><datafield tag="776" ind1="0" ind2="8"><subfield code="i">Erscheint auch als</subfield><subfield code="n">Druck-Ausgabe</subfield><subfield code="z">9783035717006</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://ebookcentral.proquest.com/lib/kxp/detail.action?docID=6427666</subfield><subfield code="m">X:EBC</subfield><subfield code="x">Aggregator</subfield><subfield code="z">lizenzpflichtig</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://www.gbv.de/dms/bowker/toc/9783035737004.pdf</subfield><subfield code="v">2022-12-29</subfield><subfield code="x">Aggregator</subfield><subfield code="3">Inhaltsverzeichnis</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-30-PQE</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-1373</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_1</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_KXP</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_736</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-Ch1</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ISIL_DE-289</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">BO</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">620.11</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">669</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="b">4535688885</subfield><subfield code="h">olr-dda ebc</subfield><subfield code="k">Vervielfältigungen (z.B. Kopien, Downloads) sind nur von einzelnen Kapiteln oder Seiten und nur zum eigenen wissenschaftlichen Gebrauch erlaubt. Keine Weitergabe an Dritte. Kein systematisches Downloaden durch Robots.</subfield><subfield code="u">i</subfield><subfield code="y">z</subfield><subfield code="z">07-06-24</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">736</subfield><subfield code="1">01</subfield><subfield code="x">4736</subfield><subfield code="b">3830533195</subfield><subfield code="h">EBC-Content</subfield><subfield code="y">zeg</subfield><subfield code="z">05-01-21</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">2020</subfield><subfield code="1">01</subfield><subfield code="x">DE-Ch1</subfield><subfield code="b">4353596403</subfield><subfield code="c">00</subfield><subfield code="f">--%%--</subfield><subfield code="d">--%%--</subfield><subfield code="e">n</subfield><subfield code="j">n</subfield><subfield code="k">Campuslizenz</subfield><subfield code="y">l01</subfield><subfield code="z">13-07-23</subfield></datafield><datafield tag="980" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="b">3843981922</subfield><subfield code="c">00</subfield><subfield code="f">--%%--</subfield><subfield code="d">--%%--</subfield><subfield code="e">--%%--</subfield><subfield code="j">n</subfield><subfield code="y">l01</subfield><subfield code="z">28-01-21</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="y">E-Book: Zugriff im HCU-Netz. Zugriff von auβerhalb nur für HCU-Angehörige möglich</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/hcuhamburg-ebooks/detail.action?docID=6427666</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">736</subfield><subfield code="1">01</subfield><subfield code="x">4736</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/staat/detail.action?docID=6427666</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">2020</subfield><subfield code="1">01</subfield><subfield code="x">DE-Ch1</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/tuchemnitz/detail.action?docID=6427666</subfield></datafield><datafield tag="981" ind1=" " ind2=" "><subfield code="2">2021</subfield><subfield code="1">01</subfield><subfield code="x">DE-289</subfield><subfield code="r">https://ebookcentral.proquest.com/lib/kiz-uniulm/detail.action?docID=6427666</subfield></datafield><datafield tag="995" ind1=" " ind2=" "><subfield code="2">370</subfield><subfield code="1">01</subfield><subfield code="x">4370</subfield><subfield code="a">olr-dda ebc</subfield></datafield><datafield tag="995" ind1=" " ind2=" "><subfield code="2">736</subfield><subfield code="1">01</subfield><subfield code="x">4736</subfield><subfield code="a">EBC-Content</subfield></datafield></record></collection>
|
| score |
7.1656294 |