Strengthening of 0.18 wt % C Steel by Cold Differential Speed Rolling

Steel sheets containing 0.18 wt % C were deformed by differential speed rolling (DSR) up to four passes and compared to the steel sheets processed by equal speed rolling (ESR). Not only microstructure, but also mechanical properties and rolling load, were studied, which enlightens the relationship b...
Ausführliche Beschreibung

Steel sheets containing 0.18 wt % C were deformed by differential speed rolling (DSR) up to four passes and compared to the steel sheets processed by equal speed rolling (ESR). Not only microstructure, but also mechanical properties and rolling load, were studied, which enlightens the relationship between microstructure, mechanical properties, and rolling load. Moreover, microstructure and properties resulting from ESR were systematically compared. During the rolling deformation, coarse grains were elongated first parallel to the rolling direction, and ultrafine grains were subsequently formed via continuous dynamic recrystallization. Microstructural analysis revealed that DSR was more effective than ESR in terms of achieving grain refinement and microstructure homogeneity. High-angle grain boundaries surrounding the ultrafine grains contributed to grain boundary strengthening, resulting in a dramatic increase in both hardness and strength after DSR. Although the steel was strengthened by rolling, the rolling load firstly increased and subsequently decreased as the number of passes increased, and lower force was required during DSR than during ESR. These can be explained by considering deformation volume and sticking friction. Ausführliche Beschreibung