Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites

Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined. Ausführliche Beschreibung

Gespeichert in:

Autor*in:	Zahra Soheilpour [verfasserIn] Amir Masood Rezadoust [verfasserIn] Mohammad Razavi-Nouri [verfasserIn] Keyvan Garoosi [verfasserIn] Seyed Reza Ghaffarian [verfasserIn]

Format:	E-Artikel
Sprache:	Persisch

Erschienen:	2020

Schlagwörter:	3d printing fused deposition modeling nanocomposite acrylonitrile-butadiene-styrene mechanical properties

Übergeordnetes Werk:	In: علوم و تکنولوژی پلیمر - Iran Polymer and Petrochemical Institute, 2018, 32(2020), 6, Seite 497-507
Übergeordnetes Werk:	volume:32 ; year:2020 ; number:6 ; pages:497-507

Links:	Link aufrufen Link aufrufen Link aufrufen Journal toc Journal toc

DOI / URN:	10.22063/jipst.2020.1705

Katalog-ID:	DOAJ00407033X

Internformat


LEADER	01000caa a22002652 4500
001	DOAJ00407033X
003	DE-627
005	20230309181924.0
007	cr uuu---uuuuu
008	230225s2020 xx \|\|\|\|\|o 00\| \|\|per c
024	7		\|a 10.22063/jipst.2020.1705 \|2 doi
035			\|a (DE-627)DOAJ00407033X
035			\|a (DE-599)DOAJca3a889bea524c5187dd2b2a48900165
040			\|a DE-627 \|b ger \|c DE-627 \|e rakwb
041			\|a per
050		0	\|a TP1080-1185
100	0		\|a Zahra Soheilpour \|e verfasserin \|4 aut
245	1	0	\|a Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites
264		1	\|c 2020
336			\|a Text \|b txt \|2 rdacontent
337			\|a Computermedien \|b c \|2 rdamedia
338			\|a Online-Ressource \|b cr \|2 rdacarrier
520			\|a Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined.
650		4	\|a 3d printing
650		4	\|a fused deposition modeling
650		4	\|a nanocomposite
650		4	\|a acrylonitrile-butadiene-styrene
650		4	\|a mechanical properties
653		0	\|a Polymers and polymer manufacture
700	0		\|a Amir Masood Rezadoust \|e verfasserin \|4 aut
700	0		\|a Mohammad Razavi-Nouri \|e verfasserin \|4 aut
700	0		\|a Keyvan Garoosi \|e verfasserin \|4 aut
700	0		\|a Seyed Reza Ghaffarian \|e verfasserin \|4 aut
773	0	8	\|i In \|t علوم و تکنولوژی پلیمر \|d Iran Polymer and Petrochemical Institute, 2018 \|g 32(2020), 6, Seite 497-507 \|w (DE-627)88394572X \|w (DE-600)2890840-5 \|x 20080883 \|7 nnns
773	1	8	\|g volume:32 \|g year:2020 \|g number:6 \|g pages:497-507
856	4	0	\|u https://doi.org/10.22063/jipst.2020.1705 \|z kostenfrei
856	4	0	\|u https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165 \|z kostenfrei
856	4	0	\|u http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf \|z kostenfrei
856	4	2	\|u https://doaj.org/toc/1016-3255 \|y Journal toc \|z kostenfrei
856	4	2	\|u https://doaj.org/toc/2008-0883 \|y Journal toc \|z kostenfrei
912			\|a GBV_USEFLAG_A
912			\|a SYSFLAG_A
912			\|a GBV_DOAJ
912			\|a GBV_ILN_20
912			\|a GBV_ILN_22
912			\|a GBV_ILN_23
912			\|a GBV_ILN_24
912			\|a GBV_ILN_39
912			\|a GBV_ILN_40
912			\|a GBV_ILN_60
912			\|a GBV_ILN_62
912			\|a GBV_ILN_63
912			\|a GBV_ILN_65
912			\|a GBV_ILN_69
912			\|a GBV_ILN_70
912			\|a GBV_ILN_73
912			\|a GBV_ILN_95
912			\|a GBV_ILN_105
912			\|a GBV_ILN_110
912			\|a GBV_ILN_151
912			\|a GBV_ILN_161
912			\|a GBV_ILN_170
912			\|a GBV_ILN_213
912			\|a GBV_ILN_230
912			\|a GBV_ILN_285
912			\|a GBV_ILN_293
912			\|a GBV_ILN_602
912			\|a GBV_ILN_2014
912			\|a GBV_ILN_4012
912			\|a GBV_ILN_4037
912			\|a GBV_ILN_4112
912			\|a GBV_ILN_4125
912			\|a GBV_ILN_4126
912			\|a GBV_ILN_4249
912			\|a GBV_ILN_4305
912			\|a GBV_ILN_4306
912			\|a GBV_ILN_4307
912			\|a GBV_ILN_4313
912			\|a GBV_ILN_4322
912			\|a GBV_ILN_4323
912			\|a GBV_ILN_4324
912			\|a GBV_ILN_4325
912			\|a GBV_ILN_4335
912			\|a GBV_ILN_4338
912			\|a GBV_ILN_4367
912			\|a GBV_ILN_4700
951			\|a AR
952			\|d 32 \|j 2020 \|e 6 \|h 497-507

Indexfelder

author_variant	z s zs a m r amr m r n mrn k g kg s r g srg
matchkey_str	article:20080883:2020----::nlecomlialdabnaoueotnierprisnpitnqaiyfdrnearlnti
hierarchy_sort_str	2020
callnumber-subject-code	TP
publishDate	2020
allfields	10.22063/jipst.2020.1705 doi (DE-627)DOAJ00407033X (DE-599)DOAJca3a889bea524c5187dd2b2a48900165 DE-627 ger DE-627 rakwb per TP1080-1185 Zahra Soheilpour verfasserin aut Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites 2020 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined. 3d printing fused deposition modeling nanocomposite acrylonitrile-butadiene-styrene mechanical properties Polymers and polymer manufacture Amir Masood Rezadoust verfasserin aut Mohammad Razavi-Nouri verfasserin aut Keyvan Garoosi verfasserin aut Seyed Reza Ghaffarian verfasserin aut In علوم و تکنولوژی پلیمر Iran Polymer and Petrochemical Institute, 2018 32(2020), 6, Seite 497-507 (DE-627)88394572X (DE-600)2890840-5 20080883 nnns volume:32 year:2020 number:6 pages:497-507 https://doi.org/10.22063/jipst.2020.1705 kostenfrei https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165 kostenfrei http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf kostenfrei https://doaj.org/toc/1016-3255 Journal toc kostenfrei https://doaj.org/toc/2008-0883 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 32 2020 6 497-507
spelling	10.22063/jipst.2020.1705 doi (DE-627)DOAJ00407033X (DE-599)DOAJca3a889bea524c5187dd2b2a48900165 DE-627 ger DE-627 rakwb per TP1080-1185 Zahra Soheilpour verfasserin aut Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites 2020 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined. 3d printing fused deposition modeling nanocomposite acrylonitrile-butadiene-styrene mechanical properties Polymers and polymer manufacture Amir Masood Rezadoust verfasserin aut Mohammad Razavi-Nouri verfasserin aut Keyvan Garoosi verfasserin aut Seyed Reza Ghaffarian verfasserin aut In علوم و تکنولوژی پلیمر Iran Polymer and Petrochemical Institute, 2018 32(2020), 6, Seite 497-507 (DE-627)88394572X (DE-600)2890840-5 20080883 nnns volume:32 year:2020 number:6 pages:497-507 https://doi.org/10.22063/jipst.2020.1705 kostenfrei https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165 kostenfrei http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf kostenfrei https://doaj.org/toc/1016-3255 Journal toc kostenfrei https://doaj.org/toc/2008-0883 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 32 2020 6 497-507
allfields_unstemmed	10.22063/jipst.2020.1705 doi (DE-627)DOAJ00407033X (DE-599)DOAJca3a889bea524c5187dd2b2a48900165 DE-627 ger DE-627 rakwb per TP1080-1185 Zahra Soheilpour verfasserin aut Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites 2020 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined. 3d printing fused deposition modeling nanocomposite acrylonitrile-butadiene-styrene mechanical properties Polymers and polymer manufacture Amir Masood Rezadoust verfasserin aut Mohammad Razavi-Nouri verfasserin aut Keyvan Garoosi verfasserin aut Seyed Reza Ghaffarian verfasserin aut In علوم و تکنولوژی پلیمر Iran Polymer and Petrochemical Institute, 2018 32(2020), 6, Seite 497-507 (DE-627)88394572X (DE-600)2890840-5 20080883 nnns volume:32 year:2020 number:6 pages:497-507 https://doi.org/10.22063/jipst.2020.1705 kostenfrei https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165 kostenfrei http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf kostenfrei https://doaj.org/toc/1016-3255 Journal toc kostenfrei https://doaj.org/toc/2008-0883 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 32 2020 6 497-507
allfieldsGer	10.22063/jipst.2020.1705 doi (DE-627)DOAJ00407033X (DE-599)DOAJca3a889bea524c5187dd2b2a48900165 DE-627 ger DE-627 rakwb per TP1080-1185 Zahra Soheilpour verfasserin aut Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites 2020 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined. 3d printing fused deposition modeling nanocomposite acrylonitrile-butadiene-styrene mechanical properties Polymers and polymer manufacture Amir Masood Rezadoust verfasserin aut Mohammad Razavi-Nouri verfasserin aut Keyvan Garoosi verfasserin aut Seyed Reza Ghaffarian verfasserin aut In علوم و تکنولوژی پلیمر Iran Polymer and Petrochemical Institute, 2018 32(2020), 6, Seite 497-507 (DE-627)88394572X (DE-600)2890840-5 20080883 nnns volume:32 year:2020 number:6 pages:497-507 https://doi.org/10.22063/jipst.2020.1705 kostenfrei https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165 kostenfrei http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf kostenfrei https://doaj.org/toc/1016-3255 Journal toc kostenfrei https://doaj.org/toc/2008-0883 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 32 2020 6 497-507
allfieldsSound	10.22063/jipst.2020.1705 doi (DE-627)DOAJ00407033X (DE-599)DOAJca3a889bea524c5187dd2b2a48900165 DE-627 ger DE-627 rakwb per TP1080-1185 Zahra Soheilpour verfasserin aut Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites 2020 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined. 3d printing fused deposition modeling nanocomposite acrylonitrile-butadiene-styrene mechanical properties Polymers and polymer manufacture Amir Masood Rezadoust verfasserin aut Mohammad Razavi-Nouri verfasserin aut Keyvan Garoosi verfasserin aut Seyed Reza Ghaffarian verfasserin aut In علوم و تکنولوژی پلیمر Iran Polymer and Petrochemical Institute, 2018 32(2020), 6, Seite 497-507 (DE-627)88394572X (DE-600)2890840-5 20080883 nnns volume:32 year:2020 number:6 pages:497-507 https://doi.org/10.22063/jipst.2020.1705 kostenfrei https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165 kostenfrei http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf kostenfrei https://doaj.org/toc/1016-3255 Journal toc kostenfrei https://doaj.org/toc/2008-0883 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 32 2020 6 497-507
language	Persian
source	In علوم و تکنولوژی پلیمر 32(2020), 6, Seite 497-507 volume:32 year:2020 number:6 pages:497-507
sourceStr	In علوم و تکنولوژی پلیمر 32(2020), 6, Seite 497-507 volume:32 year:2020 number:6 pages:497-507
format_phy_str_mv	Article
institution	findex.gbv.de
topic_facet	3d printing fused deposition modeling nanocomposite acrylonitrile-butadiene-styrene mechanical properties Polymers and polymer manufacture
isfreeaccess_bool	true
container_title	علوم و تکنولوژی پلیمر
authorswithroles_txt_mv	Zahra Soheilpour @@aut@@ Amir Masood Rezadoust @@aut@@ Mohammad Razavi-Nouri @@aut@@ Keyvan Garoosi @@aut@@ Seyed Reza Ghaffarian @@aut@@
publishDateDaySort_date	2020-01-01T00:00:00Z
hierarchy_top_id	88394572X
id	DOAJ00407033X
language_de	persisch
fullrecord	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">DOAJ00407033X</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230309181924.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230225s2020 xx \|\|\|\|\|o 00\| \|\|per c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.22063/jipst.2020.1705</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)DOAJ00407033X</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)DOAJca3a889bea524c5187dd2b2a48900165</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">per</subfield></datafield><datafield tag="050" ind1=" " ind2="0"><subfield code="a">TP1080-1185</subfield></datafield><datafield tag="100" ind1="0" ind2=" "><subfield code="a">Zahra Soheilpour</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2020</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">3d printing</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">fused deposition modeling</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">nanocomposite</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">acrylonitrile-butadiene-styrene</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">mechanical properties</subfield></datafield><datafield tag="653" ind1=" " ind2="0"><subfield code="a">Polymers and polymer manufacture</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Amir Masood Rezadoust</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Mohammad Razavi-Nouri</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Keyvan Garoosi</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Seyed Reza Ghaffarian</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">علوم و تکنولوژی پلیمر</subfield><subfield code="d">Iran Polymer and Petrochemical Institute, 2018</subfield><subfield code="g">32(2020), 6, Seite 497-507</subfield><subfield code="w">(DE-627)88394572X</subfield><subfield code="w">(DE-600)2890840-5</subfield><subfield code="x">20080883</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:32</subfield><subfield code="g">year:2020</subfield><subfield code="g">number:6</subfield><subfield code="g">pages:497-507</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.22063/jipst.2020.1705</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/1016-3255</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/2008-0883</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_DOAJ</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4012</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4367</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">32</subfield><subfield code="j">2020</subfield><subfield code="e">6</subfield><subfield code="h">497-507</subfield></datafield></record></collection>
callnumber-first	T - Technology
author	Zahra Soheilpour
spellingShingle	Zahra Soheilpour misc TP1080-1185 misc 3d printing misc fused deposition modeling misc nanocomposite misc acrylonitrile-butadiene-styrene misc mechanical properties misc Polymers and polymer manufacture Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites
authorStr	Zahra Soheilpour
ppnlink_with_tag_str_mv	@@773@@(DE-627)88394572X
format	electronic Article
delete_txt_mv	keep
author_role	aut aut aut aut aut
collection	DOAJ
remote_str	true
callnumber-label	TP1080-1185
illustrated	Not Illustrated
issn	20080883
topic_title	TP1080-1185 Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites 3d printing fused deposition modeling nanocomposite acrylonitrile-butadiene-styrene mechanical properties
topic	misc TP1080-1185 misc 3d printing misc fused deposition modeling misc nanocomposite misc acrylonitrile-butadiene-styrene misc mechanical properties misc Polymers and polymer manufacture
topic_unstemmed	misc TP1080-1185 misc 3d printing misc fused deposition modeling misc nanocomposite misc acrylonitrile-butadiene-styrene misc mechanical properties misc Polymers and polymer manufacture
topic_browse	misc TP1080-1185 misc 3d printing misc fused deposition modeling misc nanocomposite misc acrylonitrile-butadiene-styrene misc mechanical properties misc Polymers and polymer manufacture
format_facet	Elektronische Aufsätze Aufsätze Elektronische Ressource
format_main_str_mv	Text Zeitschrift/Artikel
carriertype_str_mv	cr
hierarchy_parent_title	علوم و تکنولوژی پلیمر
hierarchy_parent_id	88394572X
hierarchy_top_title	علوم و تکنولوژی پلیمر
isfreeaccess_txt	true
familylinks_str_mv	(DE-627)88394572X (DE-600)2890840-5
title	Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites
ctrlnum	(DE-627)DOAJ00407033X (DE-599)DOAJca3a889bea524c5187dd2b2a48900165
title_full	Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites
author_sort	Zahra Soheilpour
journal	علوم و تکنولوژی پلیمر
journalStr	علوم و تکنولوژی پلیمر
callnumber-first-code	T
lang_code	per
isOA_bool	true
recordtype	marc
publishDateSort	2020
contenttype_str_mv	txt
container_start_page	497
author_browse	Zahra Soheilpour Amir Masood Rezadoust Mohammad Razavi-Nouri Keyvan Garoosi Seyed Reza Ghaffarian
container_volume	32
class	TP1080-1185
format_se	Elektronische Aufsätze
author-letter	Zahra Soheilpour
doi_str_mv	10.22063/jipst.2020.1705
author2-role	verfasserin
title_sort	influence of multi-walled carbon nanotubes on tensile properties and printing quality of 3d-printed acrylonitrile-butadiene-styrene nanocomposites
callnumber	TP1080-1185
title_auth	Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites
abstract	Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined.
abstractGer	Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined.
abstract_unstemmed	Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined.
collection_details	GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700
container_issue	6
title_short	Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites
url	https://doi.org/10.22063/jipst.2020.1705 https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165 http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf https://doaj.org/toc/1016-3255 https://doaj.org/toc/2008-0883
remote_bool	true
author2	Amir Masood Rezadoust Mohammad Razavi-Nouri Keyvan Garoosi Seyed Reza Ghaffarian
author2Str	Amir Masood Rezadoust Mohammad Razavi-Nouri Keyvan Garoosi Seyed Reza Ghaffarian
ppnlink	88394572X
callnumber-subject	TP - Chemical Technology
mediatype_str_mv	c
isOA_txt	true
hochschulschrift_bool	false
doi_str	10.22063/jipst.2020.1705
callnumber-a	TP1080-1185
up_date	2024-07-03T21:48:04.327Z
_version_	1803596106926391297
fullrecord_marcxml	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">DOAJ00407033X</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230309181924.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230225s2020 xx \|\|\|\|\|o 00\| \|\|per c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.22063/jipst.2020.1705</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)DOAJ00407033X</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)DOAJca3a889bea524c5187dd2b2a48900165</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">per</subfield></datafield><datafield tag="050" ind1=" " ind2="0"><subfield code="a">TP1080-1185</subfield></datafield><datafield tag="100" ind1="0" ind2=" "><subfield code="a">Zahra Soheilpour</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2020</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Hypothesis: Due to the nature of a fused deposition modeling (FDM), by which the parts are fabricated layer by layer, many defects are prone to occur during printing of the products. Therefore, a few efficient solutions are required to minimize the defects and other shortcomings. The increase in the physical and mechanical properties of the fabricated parts using nanoparticles seems to be one of the methods. Methods: To improve the mechanical properties of acrylonitrile-butadiene-styrene (ABS), which is one of the most common materials employed in FDM technique, various amounts (1, 3 and 5 wt%) of multi-walled carbon nanotubes (MWCNTs) were added to the matrix through a melt mixing process. The filaments containing different MWCNTs contents, required for fabricating of the samples, were then prepared by extrusion. Next, the samples were printed with the layer thicknesses of 0.05, 0.1 and 0.2 mm and raster angles of +45/-45° and 0/90°. Several experiments such as the tensile and rheological tests as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations were carried out to examine the nanocomposite samples.Finding: The SEM and TEM studies revealed that the nanoparticles were reasonably well dispersed throughout the matrix. The results of the tensile tests indicated that by addition of MWCNTs, the tensile strength and Young's modulus were increased by 21% and 103%, respectively, in comparison to those of the pristine material. It was also found that at a constant layer thickness, the maximum value of the tensile strength was obtained for the nanocomposite containing 3 wt% MWCNTs, however, the modulus progressively increased with the increase of the nanoparticles content. In addition, the change in raster angle showed no significant effect on the tensile properties, and the increasing of the layer thickness had an adverse effect on the properties for all the materials examined.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">3d printing</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">fused deposition modeling</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">nanocomposite</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">acrylonitrile-butadiene-styrene</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">mechanical properties</subfield></datafield><datafield tag="653" ind1=" " ind2="0"><subfield code="a">Polymers and polymer manufacture</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Amir Masood Rezadoust</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Mohammad Razavi-Nouri</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Keyvan Garoosi</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Seyed Reza Ghaffarian</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">علوم و تکنولوژی پلیمر</subfield><subfield code="d">Iran Polymer and Petrochemical Institute, 2018</subfield><subfield code="g">32(2020), 6, Seite 497-507</subfield><subfield code="w">(DE-627)88394572X</subfield><subfield code="w">(DE-600)2890840-5</subfield><subfield code="x">20080883</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:32</subfield><subfield code="g">year:2020</subfield><subfield code="g">number:6</subfield><subfield code="g">pages:497-507</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.22063/jipst.2020.1705</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doaj.org/article/ca3a889bea524c5187dd2b2a48900165</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">http://jips.ippi.ac.ir/article_1705_c22dc5e2024b3a33e12aaa1ebb4041f2.pdf</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/1016-3255</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/2008-0883</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_DOAJ</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4012</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4367</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">32</subfield><subfield code="j">2020</subfield><subfield code="e">6</subfield><subfield code="h">497-507</subfield></datafield></record></collection>
score	7.40221

Nicht das Richtige dabei?

Schreiben Sie uns!

Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites

Nicht das Richtige dabei?

Zugang & Verfügbarkeit

Vorhandene Bände

Nicht das Richtige dabei?