Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal

The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises. Ausführliche Beschreibung

Gespeichert in:

Autor*in:	Stefania Carvalho Kano [verfasserIn] Gerson Bonfante [verfasserIn] Raquel Hussne [verfasserIn] Aline F. Siqueira [verfasserIn]

Format:	E-Artikel
Sprache:	Englisch

Erschienen:	2004

Schlagwörter:	Prótese sobre implantes Ligas Implant prosthesis Alloys

Übergeordnetes Werk:	In: Journal of Applied Oral Science - University of São Paulo, 2004, 12(2004), 4, Seite 337-343
Übergeordnetes Werk:	volume:12 ; year:2004 ; number:4 ; pages:337-343

Links:	Link aufrufen Link aufrufen Link aufrufen Journal toc Journal toc

DOI / URN:	10.1590/S1678-77572004000400016

Katalog-ID:	DOAJ033516030

Internformat


LEADER	01000caa a22002652 4500
001	DOAJ033516030
003	DE-627
005	20230307180749.0
007	cr uuu---uuuuu
008	230226s2004 xx \|\|\|\|\|o 00\| \|\|eng c
024	7		\|a 10.1590/S1678-77572004000400016 \|2 doi
035			\|a (DE-627)DOAJ033516030
035			\|a (DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5
040			\|a DE-627 \|b ger \|c DE-627 \|e rakwb
041			\|a eng
050		0	\|a RK1-715
100	0		\|a Stefania Carvalho Kano \|e verfasserin \|4 aut
245	1	0	\|a Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal
264		1	\|c 2004
336			\|a Text \|b txt \|2 rdacontent
337			\|a Computermedien \|b c \|2 rdamedia
338			\|a Online-Ressource \|b cr \|2 rdacarrier
520			\|a The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises.
650		4	\|a Prótese sobre implantes
650		4	\|a Ligas
650		4	\|a Implant prosthesis
650		4	\|a Alloys
653		0	\|a Dentistry
700	0		\|a Gerson Bonfante \|e verfasserin \|4 aut
700	0		\|a Raquel Hussne \|e verfasserin \|4 aut
700	0		\|a Aline F. Siqueira \|e verfasserin \|4 aut
773	0	8	\|i In \|t Journal of Applied Oral Science \|d University of São Paulo, 2004 \|g 12(2004), 4, Seite 337-343 \|w (DE-627)390968269 \|w (DE-600)2152066-5 \|x 16787765 \|7 nnns
773	1	8	\|g volume:12 \|g year:2004 \|g number:4 \|g pages:337-343
856	4	0	\|u https://doi.org/10.1590/S1678-77572004000400016 \|z kostenfrei
856	4	0	\|u https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5 \|z kostenfrei
856	4	0	\|u http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016 \|z kostenfrei
856	4	2	\|u https://doaj.org/toc/1678-7757 \|y Journal toc \|z kostenfrei
856	4	2	\|u https://doaj.org/toc/1678-7765 \|y Journal toc \|z kostenfrei
912			\|a GBV_USEFLAG_A
912			\|a SYSFLAG_A
912			\|a GBV_DOAJ
912			\|a GBV_ILN_20
912			\|a GBV_ILN_22
912			\|a GBV_ILN_23
912			\|a GBV_ILN_24
912			\|a GBV_ILN_31
912			\|a GBV_ILN_39
912			\|a GBV_ILN_40
912			\|a GBV_ILN_60
912			\|a GBV_ILN_62
912			\|a GBV_ILN_63
912			\|a GBV_ILN_65
912			\|a GBV_ILN_69
912			\|a GBV_ILN_73
912			\|a GBV_ILN_74
912			\|a GBV_ILN_95
912			\|a GBV_ILN_105
912			\|a GBV_ILN_110
912			\|a GBV_ILN_151
912			\|a GBV_ILN_161
912			\|a GBV_ILN_170
912			\|a GBV_ILN_206
912			\|a GBV_ILN_213
912			\|a GBV_ILN_230
912			\|a GBV_ILN_285
912			\|a GBV_ILN_293
912			\|a GBV_ILN_602
912			\|a GBV_ILN_2014
912			\|a GBV_ILN_4012
912			\|a GBV_ILN_4037
912			\|a GBV_ILN_4112
912			\|a GBV_ILN_4125
912			\|a GBV_ILN_4126
912			\|a GBV_ILN_4249
912			\|a GBV_ILN_4305
912			\|a GBV_ILN_4306
912			\|a GBV_ILN_4307
912			\|a GBV_ILN_4313
912			\|a GBV_ILN_4322
912			\|a GBV_ILN_4323
912			\|a GBV_ILN_4324
912			\|a GBV_ILN_4325
912			\|a GBV_ILN_4338
912			\|a GBV_ILN_4367
912			\|a GBV_ILN_4700
951			\|a AR
952			\|d 12 \|j 2004 \|e 4 \|h 337-343

Indexfelder

author_variant	s c k sck g b gb r h rh a f s afs
matchkey_str	article:16787765:2004----::sobsmtlatnalyfrmlnfaeokagnlcuaynlsssdlgselcsscsmrees
hierarchy_sort_str	2004
callnumber-subject-code	RK
publishDate	2004
allfields	10.1590/S1678-77572004000400016 doi (DE-627)DOAJ033516030 (DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5 DE-627 ger DE-627 rakwb eng RK1-715 Stefania Carvalho Kano verfasserin aut Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal 2004 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises. Prótese sobre implantes Ligas Implant prosthesis Alloys Dentistry Gerson Bonfante verfasserin aut Raquel Hussne verfasserin aut Aline F. Siqueira verfasserin aut In Journal of Applied Oral Science University of São Paulo, 2004 12(2004), 4, Seite 337-343 (DE-627)390968269 (DE-600)2152066-5 16787765 nnns volume:12 year:2004 number:4 pages:337-343 https://doi.org/10.1590/S1678-77572004000400016 kostenfrei https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5 kostenfrei http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016 kostenfrei https://doaj.org/toc/1678-7757 Journal toc kostenfrei https://doaj.org/toc/1678-7765 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2004 4 337-343
spelling	10.1590/S1678-77572004000400016 doi (DE-627)DOAJ033516030 (DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5 DE-627 ger DE-627 rakwb eng RK1-715 Stefania Carvalho Kano verfasserin aut Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal 2004 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises. Prótese sobre implantes Ligas Implant prosthesis Alloys Dentistry Gerson Bonfante verfasserin aut Raquel Hussne verfasserin aut Aline F. Siqueira verfasserin aut In Journal of Applied Oral Science University of São Paulo, 2004 12(2004), 4, Seite 337-343 (DE-627)390968269 (DE-600)2152066-5 16787765 nnns volume:12 year:2004 number:4 pages:337-343 https://doi.org/10.1590/S1678-77572004000400016 kostenfrei https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5 kostenfrei http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016 kostenfrei https://doaj.org/toc/1678-7757 Journal toc kostenfrei https://doaj.org/toc/1678-7765 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2004 4 337-343
allfields_unstemmed	10.1590/S1678-77572004000400016 doi (DE-627)DOAJ033516030 (DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5 DE-627 ger DE-627 rakwb eng RK1-715 Stefania Carvalho Kano verfasserin aut Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal 2004 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises. Prótese sobre implantes Ligas Implant prosthesis Alloys Dentistry Gerson Bonfante verfasserin aut Raquel Hussne verfasserin aut Aline F. Siqueira verfasserin aut In Journal of Applied Oral Science University of São Paulo, 2004 12(2004), 4, Seite 337-343 (DE-627)390968269 (DE-600)2152066-5 16787765 nnns volume:12 year:2004 number:4 pages:337-343 https://doi.org/10.1590/S1678-77572004000400016 kostenfrei https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5 kostenfrei http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016 kostenfrei https://doaj.org/toc/1678-7757 Journal toc kostenfrei https://doaj.org/toc/1678-7765 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2004 4 337-343
allfieldsGer	10.1590/S1678-77572004000400016 doi (DE-627)DOAJ033516030 (DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5 DE-627 ger DE-627 rakwb eng RK1-715 Stefania Carvalho Kano verfasserin aut Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal 2004 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises. Prótese sobre implantes Ligas Implant prosthesis Alloys Dentistry Gerson Bonfante verfasserin aut Raquel Hussne verfasserin aut Aline F. Siqueira verfasserin aut In Journal of Applied Oral Science University of São Paulo, 2004 12(2004), 4, Seite 337-343 (DE-627)390968269 (DE-600)2152066-5 16787765 nnns volume:12 year:2004 number:4 pages:337-343 https://doi.org/10.1590/S1678-77572004000400016 kostenfrei https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5 kostenfrei http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016 kostenfrei https://doaj.org/toc/1678-7757 Journal toc kostenfrei https://doaj.org/toc/1678-7765 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2004 4 337-343
allfieldsSound	10.1590/S1678-77572004000400016 doi (DE-627)DOAJ033516030 (DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5 DE-627 ger DE-627 rakwb eng RK1-715 Stefania Carvalho Kano verfasserin aut Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal 2004 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises. Prótese sobre implantes Ligas Implant prosthesis Alloys Dentistry Gerson Bonfante verfasserin aut Raquel Hussne verfasserin aut Aline F. Siqueira verfasserin aut In Journal of Applied Oral Science University of São Paulo, 2004 12(2004), 4, Seite 337-343 (DE-627)390968269 (DE-600)2152066-5 16787765 nnns volume:12 year:2004 number:4 pages:337-343 https://doi.org/10.1590/S1678-77572004000400016 kostenfrei https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5 kostenfrei http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016 kostenfrei https://doaj.org/toc/1678-7757 Journal toc kostenfrei https://doaj.org/toc/1678-7765 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2004 4 337-343
language	English
source	In Journal of Applied Oral Science 12(2004), 4, Seite 337-343 volume:12 year:2004 number:4 pages:337-343
sourceStr	In Journal of Applied Oral Science 12(2004), 4, Seite 337-343 volume:12 year:2004 number:4 pages:337-343
format_phy_str_mv	Article
institution	findex.gbv.de
topic_facet	Prótese sobre implantes Ligas Implant prosthesis Alloys Dentistry
isfreeaccess_bool	true
container_title	Journal of Applied Oral Science
authorswithroles_txt_mv	Stefania Carvalho Kano @@aut@@ Gerson Bonfante @@aut@@ Raquel Hussne @@aut@@ Aline F. Siqueira @@aut@@
publishDateDaySort_date	2004-01-01T00:00:00Z
hierarchy_top_id	390968269
id	DOAJ033516030
language_de	englisch
fullrecord	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">DOAJ033516030</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230307180749.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230226s2004 xx \|\|\|\|\|o 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1590/S1678-77572004000400016</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)DOAJ033516030</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="050" ind1=" " ind2="0"><subfield code="a">RK1-715</subfield></datafield><datafield tag="100" ind1="0" ind2=" "><subfield code="a">Stefania Carvalho Kano</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2004</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13&micro;m, 14.5&micro;m and 6.93&micro;m for pre-made cylinder, 23.18&micro;m, 33.2&micro;m and 88&micro;m for Ni-Cr cast cylinder and 25.6&micro;m, 51.8&micro;m and 114.54&micro;m for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13&micro;m, 14,5&micro;m e 6,93&micro;m para o cilindro pré-fabricado em paládio, 23,18&micro;m, 33,2&micro;m e 88&micro;m para os cilindros plásticos fundidos em Níquel cromo e 25,6&micro;m, 51,8&micro;m e 114,54 &micro;m para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Prótese sobre implantes</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Ligas</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Implant prosthesis</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Alloys</subfield></datafield><datafield tag="653" ind1=" " ind2="0"><subfield code="a">Dentistry</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Gerson Bonfante</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Raquel Hussne</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Aline F. Siqueira</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">Journal of Applied Oral Science</subfield><subfield code="d">University of São Paulo, 2004</subfield><subfield code="g">12(2004), 4, Seite 337-343</subfield><subfield code="w">(DE-627)390968269</subfield><subfield code="w">(DE-600)2152066-5</subfield><subfield code="x">16787765</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:12</subfield><subfield code="g">year:2004</subfield><subfield code="g">number:4</subfield><subfield code="g">pages:337-343</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.1590/S1678-77572004000400016</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/1678-7757</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/1678-7765</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_DOAJ</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_31</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_206</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4012</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4367</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">12</subfield><subfield code="j">2004</subfield><subfield code="e">4</subfield><subfield code="h">337-343</subfield></datafield></record></collection>
callnumber-first	R - Medicine
author	Stefania Carvalho Kano
spellingShingle	Stefania Carvalho Kano misc RK1-715 misc Prótese sobre implantes misc Ligas misc Implant prosthesis misc Alloys misc Dentistry Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal
authorStr	Stefania Carvalho Kano
ppnlink_with_tag_str_mv	@@773@@(DE-627)390968269
format	electronic Article
delete_txt_mv	keep
author_role	aut aut aut aut
collection	DOAJ
remote_str	true
callnumber-label	RK1-715
illustrated	Not Illustrated
issn	16787765
topic_title	RK1-715 Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal Prótese sobre implantes Ligas Implant prosthesis Alloys
topic	misc RK1-715 misc Prótese sobre implantes misc Ligas misc Implant prosthesis misc Alloys misc Dentistry
topic_unstemmed	misc RK1-715 misc Prótese sobre implantes misc Ligas misc Implant prosthesis misc Alloys misc Dentistry
topic_browse	misc RK1-715 misc Prótese sobre implantes misc Ligas misc Implant prosthesis misc Alloys misc Dentistry
format_facet	Elektronische Aufsätze Aufsätze Elektronische Ressource
format_main_str_mv	Text Zeitschrift/Artikel
carriertype_str_mv	cr
hierarchy_parent_title	Journal of Applied Oral Science
hierarchy_parent_id	390968269
hierarchy_top_title	Journal of Applied Oral Science
isfreeaccess_txt	true
familylinks_str_mv	(DE-627)390968269 (DE-600)2152066-5
title	Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal
ctrlnum	(DE-627)DOAJ033516030 (DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5
title_full	Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal
author_sort	Stefania Carvalho Kano
journal	Journal of Applied Oral Science
journalStr	Journal of Applied Oral Science
callnumber-first-code	R
lang_code	eng
isOA_bool	true
recordtype	marc
publishDateSort	2004
contenttype_str_mv	txt
container_start_page	337
author_browse	Stefania Carvalho Kano Gerson Bonfante Raquel Hussne Aline F. Siqueira
container_volume	12
class	RK1-715
format_se	Elektronische Aufsätze
author-letter	Stefania Carvalho Kano
doi_str_mv	10.1590/S1678-77572004000400016
author2-role	verfasserin
title_sort	use of base metal casting alloys for implant framework: marginal accuracy analysis uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal
callnumber	RK1-715
title_auth	Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal
abstract	The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises.
abstractGer	The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises.
abstract_unstemmed	The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13µm, 14.5µm and 6.93µm for pre-made cylinder, 23.18µm, 33.2µm and 88µm for Ni-Cr cast cylinder and 25.6µm, 51.8µm and 114.54µm for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13µm, 14,5µm e 6,93µm para o cilindro pré-fabricado em paládio, 23,18µm, 33,2µm e 88µm para os cilindros plásticos fundidos em Níquel cromo e 25,6µm, 51,8µm e 114,54 µm para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises.
collection_details	GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700
container_issue	4
title_short	Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal
url	https://doi.org/10.1590/S1678-77572004000400016 https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5 http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016 https://doaj.org/toc/1678-7757 https://doaj.org/toc/1678-7765
remote_bool	true
author2	Gerson Bonfante Raquel Hussne Aline F. Siqueira
author2Str	Gerson Bonfante Raquel Hussne Aline F. Siqueira
ppnlink	390968269
callnumber-subject	RK - Dentistry
mediatype_str_mv	c
isOA_txt	true
hochschulschrift_bool	false
doi_str	10.1590/S1678-77572004000400016
callnumber-a	RK1-715
up_date	2024-07-03T18:11:58.117Z
_version_	1803582510852997120
fullrecord_marcxml	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">DOAJ033516030</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230307180749.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230226s2004 xx \|\|\|\|\|o 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1590/S1678-77572004000400016</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)DOAJ033516030</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)DOAJcaf67e26db244d9ba203321c28cc67a5</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="050" ind1=" " ind2="0"><subfield code="a">RK1-715</subfield></datafield><datafield tag="100" ind1="0" ind2=" "><subfield code="a">Stefania Carvalho Kano</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2004</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromium alloy, (2) plastic cylinder cast in nickel-chromium alloy, and (3) silver-palladium pre-made cylinder (control) were examined for marginal accuracy according to: (A) vertical gap; (B) horizontal gap and (C) horizontal gap depth at the abutment/cylinder interface. Data were submitted to statistical analysis (ANOVA and Student-Newman Keuls, p<0.05). Mean values for vertical, horizontal and gap depth were 4.13&micro;m, 14.5&micro;m and 6.93&micro;m for pre-made cylinder, 23.18&micro;m, 33.2&micro;m and 88&micro;m for Ni-Cr cast cylinder and 25.6&micro;m, 51.8&micro;m and 114.54&micro;m for Co-Cr cast cylinder. No statistically significant differences were found between cast groups (1 and 2), but significant better fit was obtained with pre-made metal cylinders when compared to cast cylinders with Ni-Cr and Co-Cr alloys, for all analyses.<br<O protocolo para prótese sobre implantes recomenda o uso de uma infra-estrutura em ouro para próteses metalo-plásticas e metalo-cerâmicas. No entanto, devido ao seu alto custo, o uso de ligas alternativas é desejado. OBJETIVO: Este estudo compara a adaptação marginal de cilindros protéticos pré-fabricados e cilindros protéticos plásticos fundidos com dois tipos de ligas metálicas básicas. MATERIAL E MÉTODOS: 05 amostras de (1) cilindros plásticos fundidos em liga de cobalto cromo; (2) cilindros plásticos fundidos em liga de níquel cromo e (3) cilindros pré-fabricados com cinta metálica em paládio, foram examinados na interface intermediário/cilindro protético na análise de desajuste marginal, considerando-se (A) desajuste vertical, (B) desajuste horizontal e (C) profundidade de fenda. RESULTADOS: os valores médios para o desajuste vertical, horizontal e profundidade foram, respectivamente, 4,13&micro;m, 14,5&micro;m e 6,93&micro;m para o cilindro pré-fabricado em paládio, 23,18&micro;m, 33,2&micro;m e 88&micro;m para os cilindros plásticos fundidos em Níquel cromo e 25,6&micro;m, 51,8&micro;m e 114,54 &micro;m para os cilindros fundidos em cobalto-cromo. CONCLUSÃO: não foram encontradas diferenças estatísticas entre os grupos fundidos (grupo 1 e 2), mas uma adaptação marginal significantemente superior foi observada com os cilindros pré-fabricados quando comparado aos cilindros plásticos fundidos com níquel-cromo e cobalto-cromo para todas as análises.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Prótese sobre implantes</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Ligas</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Implant prosthesis</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Alloys</subfield></datafield><datafield tag="653" ind1=" " ind2="0"><subfield code="a">Dentistry</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Gerson Bonfante</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Raquel Hussne</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Aline F. Siqueira</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">Journal of Applied Oral Science</subfield><subfield code="d">University of São Paulo, 2004</subfield><subfield code="g">12(2004), 4, Seite 337-343</subfield><subfield code="w">(DE-627)390968269</subfield><subfield code="w">(DE-600)2152066-5</subfield><subfield code="x">16787765</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:12</subfield><subfield code="g">year:2004</subfield><subfield code="g">number:4</subfield><subfield code="g">pages:337-343</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.1590/S1678-77572004000400016</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doaj.org/article/caf67e26db244d9ba203321c28cc67a5</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572004000400016</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/1678-7757</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/1678-7765</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_DOAJ</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_31</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_206</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4012</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4367</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">12</subfield><subfield code="j">2004</subfield><subfield code="e">4</subfield><subfield code="h">337-343</subfield></datafield></record></collection>
score	7.4021244

Nicht das Richtige dabei?

Schreiben Sie uns!

Use of base metal casting alloys for implant framework: marginal accuracy analysis Uso de ligas metálicas básicas em próteses sobre implantes: análise da adaptação marginal

Nicht das Richtige dabei?

Zugang & Verfügbarkeit

Vorhandene Bände

Nicht das Richtige dabei?