Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions

Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins. Ausführliche Beschreibung

Gespeichert in:

Autor*in:	Rajesh Saini [verfasserIn] Ravindra Kotian [verfasserIn] Prashanthi Madhyastha [verfasserIn] N Srikant [verfasserIn]

Format:	E-Artikel
Sprache:	Englisch

Erschienen:	2016

Schlagwörter:	Acrylic resin heat-cure acrylic self-cure acrylic solubility water sorption

Übergeordnetes Werk:	In: Indian Journal of Dental Research - Wolters Kluwer Medknow Publications, 2007, 27(2016), 3, Seite 288-294
Übergeordnetes Werk:	volume:27 ; year:2016 ; number:3 ; pages:288-294

Links:	Link aufrufen Link aufrufen Link aufrufen Journal toc Journal toc

DOI / URN:	10.4103/0970-9290.186234

Katalog-ID:	DOAJ03517384X

Internformat


LEADER	01000caa a22002652 4500
001	DOAJ03517384X
003	DE-627
005	20230307194922.0
007	cr uuu---uuuuu
008	230227s2016 xx \|\|\|\|\|o 00\| \|\|eng c
024	7		\|a 10.4103/0970-9290.186234 \|2 doi
035			\|a (DE-627)DOAJ03517384X
035			\|a (DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c
040			\|a DE-627 \|b ger \|c DE-627 \|e rakwb
041			\|a eng
050		0	\|a RK1-715
100	0		\|a Rajesh Saini \|e verfasserin \|4 aut
245	1	0	\|a Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions
264		1	\|c 2016
336			\|a Text \|b txt \|2 rdacontent
337			\|a Computermedien \|b c \|2 rdamedia
338			\|a Online-Ressource \|b cr \|2 rdacarrier
520			\|a Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins.
650		4	\|a Acrylic resin
650		4	\|a heat-cure acrylic
650		4	\|a self-cure acrylic
650		4	\|a solubility
650		4	\|a water sorption
653		0	\|a Dentistry
700	0		\|a Ravindra Kotian \|e verfasserin \|4 aut
700	0		\|a Prashanthi Madhyastha \|e verfasserin \|4 aut
700	0		\|a N Srikant \|e verfasserin \|4 aut
773	0	8	\|i In \|t Indian Journal of Dental Research \|d Wolters Kluwer Medknow Publications, 2007 \|g 27(2016), 3, Seite 288-294 \|w (DE-627)545783836 \|w (DE-600)2388222-0 \|x 19983603 \|7 nnns
773	1	8	\|g volume:27 \|g year:2016 \|g number:3 \|g pages:288-294
856	4	0	\|u https://doi.org/10.4103/0970-9290.186234 \|z kostenfrei
856	4	0	\|u https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c \|z kostenfrei
856	4	0	\|u http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini \|z kostenfrei
856	4	2	\|u https://doaj.org/toc/0970-9290 \|y Journal toc \|z kostenfrei
856	4	2	\|u https://doaj.org/toc/1998-3603 \|y Journal toc \|z kostenfrei
912			\|a GBV_USEFLAG_A
912			\|a SYSFLAG_A
912			\|a GBV_DOAJ
912			\|a GBV_ILN_11
912			\|a GBV_ILN_20
912			\|a GBV_ILN_22
912			\|a GBV_ILN_23
912			\|a GBV_ILN_24
912			\|a GBV_ILN_39
912			\|a GBV_ILN_40
912			\|a GBV_ILN_60
912			\|a GBV_ILN_62
912			\|a GBV_ILN_63
912			\|a GBV_ILN_65
912			\|a GBV_ILN_69
912			\|a GBV_ILN_73
912			\|a GBV_ILN_74
912			\|a GBV_ILN_95
912			\|a GBV_ILN_105
912			\|a GBV_ILN_110
912			\|a GBV_ILN_151
912			\|a GBV_ILN_161
912			\|a GBV_ILN_170
912			\|a GBV_ILN_206
912			\|a GBV_ILN_213
912			\|a GBV_ILN_230
912			\|a GBV_ILN_285
912			\|a GBV_ILN_293
912			\|a GBV_ILN_602
912			\|a GBV_ILN_2003
912			\|a GBV_ILN_2014
912			\|a GBV_ILN_4012
912			\|a GBV_ILN_4037
912			\|a GBV_ILN_4112
912			\|a GBV_ILN_4125
912			\|a GBV_ILN_4126
912			\|a GBV_ILN_4249
912			\|a GBV_ILN_4305
912			\|a GBV_ILN_4306
912			\|a GBV_ILN_4307
912			\|a GBV_ILN_4313
912			\|a GBV_ILN_4322
912			\|a GBV_ILN_4323
912			\|a GBV_ILN_4324
912			\|a GBV_ILN_4325
912			\|a GBV_ILN_4338
912			\|a GBV_ILN_4367
912			\|a GBV_ILN_4700
951			\|a AR
952			\|d 27 \|j 2016 \|e 3 \|h 288-294

Indexfelder

author_variant	r s rs r k rk p m pm n s ns
matchkey_str	article:19983603:2016----::oprtvsuyfopinnslbltohacradefuecyir
hierarchy_sort_str	2016
callnumber-subject-code	RK
publishDate	2016
allfields	10.4103/0970-9290.186234 doi (DE-627)DOAJ03517384X (DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c DE-627 ger DE-627 rakwb eng RK1-715 Rajesh Saini verfasserin aut Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions 2016 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins. Acrylic resin heat-cure acrylic self-cure acrylic solubility water sorption Dentistry Ravindra Kotian verfasserin aut Prashanthi Madhyastha verfasserin aut N Srikant verfasserin aut In Indian Journal of Dental Research Wolters Kluwer Medknow Publications, 2007 27(2016), 3, Seite 288-294 (DE-627)545783836 (DE-600)2388222-0 19983603 nnns volume:27 year:2016 number:3 pages:288-294 https://doi.org/10.4103/0970-9290.186234 kostenfrei https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c kostenfrei http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini kostenfrei https://doaj.org/toc/0970-9290 Journal toc kostenfrei https://doaj.org/toc/1998-3603 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2003 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 27 2016 3 288-294
spelling	10.4103/0970-9290.186234 doi (DE-627)DOAJ03517384X (DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c DE-627 ger DE-627 rakwb eng RK1-715 Rajesh Saini verfasserin aut Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions 2016 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins. Acrylic resin heat-cure acrylic self-cure acrylic solubility water sorption Dentistry Ravindra Kotian verfasserin aut Prashanthi Madhyastha verfasserin aut N Srikant verfasserin aut In Indian Journal of Dental Research Wolters Kluwer Medknow Publications, 2007 27(2016), 3, Seite 288-294 (DE-627)545783836 (DE-600)2388222-0 19983603 nnns volume:27 year:2016 number:3 pages:288-294 https://doi.org/10.4103/0970-9290.186234 kostenfrei https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c kostenfrei http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini kostenfrei https://doaj.org/toc/0970-9290 Journal toc kostenfrei https://doaj.org/toc/1998-3603 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2003 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 27 2016 3 288-294
allfields_unstemmed	10.4103/0970-9290.186234 doi (DE-627)DOAJ03517384X (DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c DE-627 ger DE-627 rakwb eng RK1-715 Rajesh Saini verfasserin aut Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions 2016 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins. Acrylic resin heat-cure acrylic self-cure acrylic solubility water sorption Dentistry Ravindra Kotian verfasserin aut Prashanthi Madhyastha verfasserin aut N Srikant verfasserin aut In Indian Journal of Dental Research Wolters Kluwer Medknow Publications, 2007 27(2016), 3, Seite 288-294 (DE-627)545783836 (DE-600)2388222-0 19983603 nnns volume:27 year:2016 number:3 pages:288-294 https://doi.org/10.4103/0970-9290.186234 kostenfrei https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c kostenfrei http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini kostenfrei https://doaj.org/toc/0970-9290 Journal toc kostenfrei https://doaj.org/toc/1998-3603 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2003 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 27 2016 3 288-294
allfieldsGer	10.4103/0970-9290.186234 doi (DE-627)DOAJ03517384X (DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c DE-627 ger DE-627 rakwb eng RK1-715 Rajesh Saini verfasserin aut Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions 2016 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins. Acrylic resin heat-cure acrylic self-cure acrylic solubility water sorption Dentistry Ravindra Kotian verfasserin aut Prashanthi Madhyastha verfasserin aut N Srikant verfasserin aut In Indian Journal of Dental Research Wolters Kluwer Medknow Publications, 2007 27(2016), 3, Seite 288-294 (DE-627)545783836 (DE-600)2388222-0 19983603 nnns volume:27 year:2016 number:3 pages:288-294 https://doi.org/10.4103/0970-9290.186234 kostenfrei https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c kostenfrei http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini kostenfrei https://doaj.org/toc/0970-9290 Journal toc kostenfrei https://doaj.org/toc/1998-3603 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2003 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 27 2016 3 288-294
allfieldsSound	10.4103/0970-9290.186234 doi (DE-627)DOAJ03517384X (DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c DE-627 ger DE-627 rakwb eng RK1-715 Rajesh Saini verfasserin aut Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions 2016 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins. Acrylic resin heat-cure acrylic self-cure acrylic solubility water sorption Dentistry Ravindra Kotian verfasserin aut Prashanthi Madhyastha verfasserin aut N Srikant verfasserin aut In Indian Journal of Dental Research Wolters Kluwer Medknow Publications, 2007 27(2016), 3, Seite 288-294 (DE-627)545783836 (DE-600)2388222-0 19983603 nnns volume:27 year:2016 number:3 pages:288-294 https://doi.org/10.4103/0970-9290.186234 kostenfrei https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c kostenfrei http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini kostenfrei https://doaj.org/toc/0970-9290 Journal toc kostenfrei https://doaj.org/toc/1998-3603 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2003 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 27 2016 3 288-294
language	English
source	In Indian Journal of Dental Research 27(2016), 3, Seite 288-294 volume:27 year:2016 number:3 pages:288-294
sourceStr	In Indian Journal of Dental Research 27(2016), 3, Seite 288-294 volume:27 year:2016 number:3 pages:288-294
format_phy_str_mv	Article
institution	findex.gbv.de
topic_facet	Acrylic resin heat-cure acrylic self-cure acrylic solubility water sorption Dentistry
isfreeaccess_bool	true
container_title	Indian Journal of Dental Research
authorswithroles_txt_mv	Rajesh Saini @@aut@@ Ravindra Kotian @@aut@@ Prashanthi Madhyastha @@aut@@ N Srikant @@aut@@
publishDateDaySort_date	2016-01-01T00:00:00Z
hierarchy_top_id	545783836
id	DOAJ03517384X
language_de	englisch
fullrecord	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">DOAJ03517384X</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230307194922.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230227s2016 xx \|\|\|\|\|o 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.4103/0970-9290.186234</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)DOAJ03517384X</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="050" ind1=" " ind2="0"><subfield code="a">RK1-715</subfield></datafield><datafield tag="100" ind1="0" ind2=" "><subfield code="a">Rajesh Saini</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2016</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Acrylic resin</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">heat-cure acrylic</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">self-cure acrylic</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">solubility</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">water sorption</subfield></datafield><datafield tag="653" ind1=" " ind2="0"><subfield code="a">Dentistry</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Ravindra Kotian</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Prashanthi Madhyastha</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">N Srikant</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">Indian Journal of Dental Research</subfield><subfield code="d">Wolters Kluwer Medknow Publications, 2007</subfield><subfield code="g">27(2016), 3, Seite 288-294</subfield><subfield code="w">(DE-627)545783836</subfield><subfield code="w">(DE-600)2388222-0</subfield><subfield code="x">19983603</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:27</subfield><subfield code="g">year:2016</subfield><subfield code="g">number:3</subfield><subfield code="g">pages:288-294</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.4103/0970-9290.186234</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/0970-9290</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/1998-3603</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_DOAJ</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_11</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_206</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2003</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4012</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4367</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">27</subfield><subfield code="j">2016</subfield><subfield code="e">3</subfield><subfield code="h">288-294</subfield></datafield></record></collection>
callnumber-first	R - Medicine
author	Rajesh Saini
spellingShingle	Rajesh Saini misc RK1-715 misc Acrylic resin misc heat-cure acrylic misc self-cure acrylic misc solubility misc water sorption misc Dentistry Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions
authorStr	Rajesh Saini
ppnlink_with_tag_str_mv	@@773@@(DE-627)545783836
format	electronic Article
delete_txt_mv	keep
author_role	aut aut aut aut
collection	DOAJ
remote_str	true
callnumber-label	RK1-715
illustrated	Not Illustrated
issn	19983603
topic_title	RK1-715 Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions Acrylic resin heat-cure acrylic self-cure acrylic solubility water sorption
topic	misc RK1-715 misc Acrylic resin misc heat-cure acrylic misc self-cure acrylic misc solubility misc water sorption misc Dentistry
topic_unstemmed	misc RK1-715 misc Acrylic resin misc heat-cure acrylic misc self-cure acrylic misc solubility misc water sorption misc Dentistry
topic_browse	misc RK1-715 misc Acrylic resin misc heat-cure acrylic misc self-cure acrylic misc solubility misc water sorption misc Dentistry
format_facet	Elektronische Aufsätze Aufsätze Elektronische Ressource
format_main_str_mv	Text Zeitschrift/Artikel
carriertype_str_mv	cr
hierarchy_parent_title	Indian Journal of Dental Research
hierarchy_parent_id	545783836
hierarchy_top_title	Indian Journal of Dental Research
isfreeaccess_txt	true
familylinks_str_mv	(DE-627)545783836 (DE-600)2388222-0
title	Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions
ctrlnum	(DE-627)DOAJ03517384X (DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c
title_full	Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions
author_sort	Rajesh Saini
journal	Indian Journal of Dental Research
journalStr	Indian Journal of Dental Research
callnumber-first-code	R
lang_code	eng
isOA_bool	true
recordtype	marc
publishDateSort	2016
contenttype_str_mv	txt
container_start_page	288
author_browse	Rajesh Saini Ravindra Kotian Prashanthi Madhyastha N Srikant
container_volume	27
class	RK1-715
format_se	Elektronische Aufsätze
author-letter	Rajesh Saini
doi_str_mv	10.4103/0970-9290.186234
author2-role	verfasserin
title_sort	comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions
callnumber	RK1-715
title_auth	Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions
abstract	Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins.
abstractGer	Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins.
abstract_unstemmed	Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins.
collection_details	GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_73 GBV_ILN_74 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_206 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_602 GBV_ILN_2003 GBV_ILN_2014 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700
container_issue	3
title_short	Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions
url	https://doi.org/10.4103/0970-9290.186234 https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini https://doaj.org/toc/0970-9290 https://doaj.org/toc/1998-3603
remote_bool	true
author2	Ravindra Kotian Prashanthi Madhyastha N Srikant
author2Str	Ravindra Kotian Prashanthi Madhyastha N Srikant
ppnlink	545783836
callnumber-subject	RK - Dentistry
mediatype_str_mv	c
isOA_txt	true
hochschulschrift_bool	false
doi_str	10.4103/0970-9290.186234
callnumber-a	RK1-715
up_date	2024-07-03T13:26:05.375Z
_version_	1803564524900450304
fullrecord_marcxml	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">DOAJ03517384X</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230307194922.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230227s2016 xx \|\|\|\|\|o 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.4103/0970-9290.186234</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)DOAJ03517384X</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)DOAJf476771288e94c8b87eadbfa83d2c84c</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="050" ind1=" " ind2="0"><subfield code="a">RK1-715</subfield></datafield><datafield tag="100" ind1="0" ind2=" "><subfield code="a">Rajesh Saini</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2016</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Objective: The objective of this study was to compare the sorption and solubility of heat-cure and self-cure acrylic resins in different solutions. Materials and Methods: One heat-cure acrylic resin (Trevalon) and one self-cure acrylic resin (Rapid Repair) were studied. Five groups of square-shaped specimens (20 mm × 20 mm × 2 mm) were prepared for each acrylic resin and then immersed in five solutions: distilled water, artificial saliva, denture cleansing solution, distilled water, and denture cleaning solution for 12 h alternatively, artificial saliva and denture cleaning solution for 12 h alternatively at 37 ± 2°C, and tested sorption and solubility by weight gain/loss method, respectively, after 1, 6, and 11 weeks. The data were analyzed by one-way analysis of variance followed by post hoc Tukey's test. Results: Water sorption mean values varied from 17.5 ± 0.88 to 27.25 ± 1.04 μg/mm 3 for heat cure and from 12.75 ± 0.55 to 19.75 ± 1.04 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically significant (P< 0.001). Water solubility mean values varied from 0.25 ± 0.55 to 1.5 ± 0.55 μg/mm 3 for heat cure and from 1.5 ± 0.55 to 6.5 ± 0.55 μg/mm 3 for self-cure in the different solutions after different interval periods of 1, 6, and 11 weeks. These values were statistically not significant (P < 0.05). There was no linear correlation between sorption and solubility values. Overall, analysis of results showed the maximum sorption value in denture cleansing solution followed by alternative soaking in distilled water and artificial saliva. Least sorption was observed with artificial saliva followed by distilled water. Conclusion: Both heat-cure and self-cure acrylic resins showed varying water sorption and solubility. The results of both water sorption and solubility showed compliance with the International Standards Organization specification. No correlation was found between water sorption and solubility. Artificial saliva solution is a better storage medium than distilled water and denture cleansing solution for both heat-cure and self-cure acrylic resins.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Acrylic resin</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">heat-cure acrylic</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">self-cure acrylic</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">solubility</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">water sorption</subfield></datafield><datafield tag="653" ind1=" " ind2="0"><subfield code="a">Dentistry</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Ravindra Kotian</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Prashanthi Madhyastha</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">N Srikant</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">Indian Journal of Dental Research</subfield><subfield code="d">Wolters Kluwer Medknow Publications, 2007</subfield><subfield code="g">27(2016), 3, Seite 288-294</subfield><subfield code="w">(DE-627)545783836</subfield><subfield code="w">(DE-600)2388222-0</subfield><subfield code="x">19983603</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:27</subfield><subfield code="g">year:2016</subfield><subfield code="g">number:3</subfield><subfield code="g">pages:288-294</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.4103/0970-9290.186234</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doaj.org/article/f476771288e94c8b87eadbfa83d2c84c</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">http://www.ijdr.in/article.asp?issn=0970-9290;year=2016;volume=27;issue=3;spage=288;epage=294;aulast=Saini</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/0970-9290</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/1998-3603</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_DOAJ</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_11</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_206</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2003</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4012</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4367</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">27</subfield><subfield code="j">2016</subfield><subfield code="e">3</subfield><subfield code="h">288-294</subfield></datafield></record></collection>
score	7.401025

Nicht das Richtige dabei?

Schreiben Sie uns!

Comparative study of sorption and solubility of heat-cure and self-cure acrylic resins in different solutions

Nicht das Richtige dabei?

Zugang & Verfügbarkeit

Vorhandene Bände

Nicht das Richtige dabei?