Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys

In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characte...
Ausführliche Beschreibung

Gespeichert in:

Autor*in:	Li Wang [verfasserIn] Zhenlin Zhang [verfasserIn] Yajun Luo [verfasserIn] Ying Xiao [verfasserIn] Fengliang Tan [verfasserIn] Kecai Liu [verfasserIn]

Format:	E-Artikel
Sprache:	Englisch

Erschienen:	2022

Schlagwörter:	CNTs composites stir casting wear

Übergeordnetes Werk:	In: Metals - MDPI AG, 2012, 12(2022), 12, p 2171
Übergeordnetes Werk:	volume:12 ; year:2022 ; number:12, p 2171

Links:	Link aufrufen Link aufrufen Link aufrufen Journal toc

DOI / URN:	10.3390/met12122171

Katalog-ID:	DOAJ083026541

Internformat


LEADER	01000caa a22002652 4500
001	DOAJ083026541
003	DE-627
005	20240414150450.0
007	cr uuu---uuuuu
008	230311s2022 xx \|\|\|\|\|o 00\| \|\|eng c
024	7		\|a 10.3390/met12122171 \|2 doi
035			\|a (DE-627)DOAJ083026541
035			\|a (DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56
040			\|a DE-627 \|b ger \|c DE-627 \|e rakwb
041			\|a eng
050		0	\|a TN1-997
100	0		\|a Li Wang \|e verfasserin \|4 aut
245	1	0	\|a Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys
264		1	\|c 2022
336			\|a Text \|b txt \|2 rdacontent
337			\|a Computermedien \|b c \|2 rdamedia
338			\|a Online-Ressource \|b cr \|2 rdacarrier
520			\|a In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively.
650		4	\|a CNTs
650		4	\|a composites
650		4	\|a stir casting
650		4	\|a wear
653		0	\|a Mining engineering. Metallurgy
700	0		\|a Zhenlin Zhang \|e verfasserin \|4 aut
700	0		\|a Yajun Luo \|e verfasserin \|4 aut
700	0		\|a Ying Xiao \|e verfasserin \|4 aut
700	0		\|a Fengliang Tan \|e verfasserin \|4 aut
700	0		\|a Kecai Liu \|e verfasserin \|4 aut
773	0	8	\|i In \|t Metals \|d MDPI AG, 2012 \|g 12(2022), 12, p 2171 \|w (DE-627)718627172 \|w (DE-600)2662252-X \|x 20754701 \|7 nnns
773	1	8	\|g volume:12 \|g year:2022 \|g number:12, p 2171
856	4	0	\|u https://doi.org/10.3390/met12122171 \|z kostenfrei
856	4	0	\|u https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56 \|z kostenfrei
856	4	0	\|u https://www.mdpi.com/2075-4701/12/12/2171 \|z kostenfrei
856	4	2	\|u https://doaj.org/toc/2075-4701 \|y Journal toc \|z kostenfrei
912			\|a GBV_USEFLAG_A
912			\|a SYSFLAG_A
912			\|a GBV_DOAJ
912			\|a GBV_ILN_20
912			\|a GBV_ILN_22
912			\|a GBV_ILN_23
912			\|a GBV_ILN_24
912			\|a GBV_ILN_39
912			\|a GBV_ILN_40
912			\|a GBV_ILN_60
912			\|a GBV_ILN_62
912			\|a GBV_ILN_63
912			\|a GBV_ILN_65
912			\|a GBV_ILN_69
912			\|a GBV_ILN_70
912			\|a GBV_ILN_73
912			\|a GBV_ILN_95
912			\|a GBV_ILN_105
912			\|a GBV_ILN_110
912			\|a GBV_ILN_151
912			\|a GBV_ILN_161
912			\|a GBV_ILN_170
912			\|a GBV_ILN_213
912			\|a GBV_ILN_230
912			\|a GBV_ILN_285
912			\|a GBV_ILN_293
912			\|a GBV_ILN_370
912			\|a GBV_ILN_602
912			\|a GBV_ILN_2014
912			\|a GBV_ILN_2055
912			\|a GBV_ILN_4012
912			\|a GBV_ILN_4037
912			\|a GBV_ILN_4112
912			\|a GBV_ILN_4125
912			\|a GBV_ILN_4126
912			\|a GBV_ILN_4249
912			\|a GBV_ILN_4305
912			\|a GBV_ILN_4306
912			\|a GBV_ILN_4307
912			\|a GBV_ILN_4313
912			\|a GBV_ILN_4322
912			\|a GBV_ILN_4323
912			\|a GBV_ILN_4324
912			\|a GBV_ILN_4325
912			\|a GBV_ILN_4335
912			\|a GBV_ILN_4338
912			\|a GBV_ILN_4367
912			\|a GBV_ILN_4700
951			\|a AR
952			\|d 12 \|j 2022 \|e 12, p 2171

Indexfelder

author_variant	l w lw z z zz y l yl y x yx f t ft k l kl
matchkey_str	article:20754701:2022----::nesadntenlecnmcaimfnsnhmcotutrsnwacaatrztoosm
hierarchy_sort_str	2022
callnumber-subject-code	TN
publishDate	2022
allfields	10.3390/met12122171 doi (DE-627)DOAJ083026541 (DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56 DE-627 ger DE-627 rakwb eng TN1-997 Li Wang verfasserin aut Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys 2022 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively. CNTs composites stir casting wear Mining engineering. Metallurgy Zhenlin Zhang verfasserin aut Yajun Luo verfasserin aut Ying Xiao verfasserin aut Fengliang Tan verfasserin aut Kecai Liu verfasserin aut In Metals MDPI AG, 2012 12(2022), 12, p 2171 (DE-627)718627172 (DE-600)2662252-X 20754701 nnns volume:12 year:2022 number:12, p 2171 https://doi.org/10.3390/met12122171 kostenfrei https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56 kostenfrei https://www.mdpi.com/2075-4701/12/12/2171 kostenfrei https://doaj.org/toc/2075-4701 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_2055 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2022 12, p 2171
spelling	10.3390/met12122171 doi (DE-627)DOAJ083026541 (DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56 DE-627 ger DE-627 rakwb eng TN1-997 Li Wang verfasserin aut Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys 2022 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively. CNTs composites stir casting wear Mining engineering. Metallurgy Zhenlin Zhang verfasserin aut Yajun Luo verfasserin aut Ying Xiao verfasserin aut Fengliang Tan verfasserin aut Kecai Liu verfasserin aut In Metals MDPI AG, 2012 12(2022), 12, p 2171 (DE-627)718627172 (DE-600)2662252-X 20754701 nnns volume:12 year:2022 number:12, p 2171 https://doi.org/10.3390/met12122171 kostenfrei https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56 kostenfrei https://www.mdpi.com/2075-4701/12/12/2171 kostenfrei https://doaj.org/toc/2075-4701 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_2055 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2022 12, p 2171
allfields_unstemmed	10.3390/met12122171 doi (DE-627)DOAJ083026541 (DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56 DE-627 ger DE-627 rakwb eng TN1-997 Li Wang verfasserin aut Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys 2022 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively. CNTs composites stir casting wear Mining engineering. Metallurgy Zhenlin Zhang verfasserin aut Yajun Luo verfasserin aut Ying Xiao verfasserin aut Fengliang Tan verfasserin aut Kecai Liu verfasserin aut In Metals MDPI AG, 2012 12(2022), 12, p 2171 (DE-627)718627172 (DE-600)2662252-X 20754701 nnns volume:12 year:2022 number:12, p 2171 https://doi.org/10.3390/met12122171 kostenfrei https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56 kostenfrei https://www.mdpi.com/2075-4701/12/12/2171 kostenfrei https://doaj.org/toc/2075-4701 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_2055 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2022 12, p 2171
allfieldsGer	10.3390/met12122171 doi (DE-627)DOAJ083026541 (DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56 DE-627 ger DE-627 rakwb eng TN1-997 Li Wang verfasserin aut Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys 2022 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively. CNTs composites stir casting wear Mining engineering. Metallurgy Zhenlin Zhang verfasserin aut Yajun Luo verfasserin aut Ying Xiao verfasserin aut Fengliang Tan verfasserin aut Kecai Liu verfasserin aut In Metals MDPI AG, 2012 12(2022), 12, p 2171 (DE-627)718627172 (DE-600)2662252-X 20754701 nnns volume:12 year:2022 number:12, p 2171 https://doi.org/10.3390/met12122171 kostenfrei https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56 kostenfrei https://www.mdpi.com/2075-4701/12/12/2171 kostenfrei https://doaj.org/toc/2075-4701 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_2055 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2022 12, p 2171
allfieldsSound	10.3390/met12122171 doi (DE-627)DOAJ083026541 (DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56 DE-627 ger DE-627 rakwb eng TN1-997 Li Wang verfasserin aut Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys 2022 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively. CNTs composites stir casting wear Mining engineering. Metallurgy Zhenlin Zhang verfasserin aut Yajun Luo verfasserin aut Ying Xiao verfasserin aut Fengliang Tan verfasserin aut Kecai Liu verfasserin aut In Metals MDPI AG, 2012 12(2022), 12, p 2171 (DE-627)718627172 (DE-600)2662252-X 20754701 nnns volume:12 year:2022 number:12, p 2171 https://doi.org/10.3390/met12122171 kostenfrei https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56 kostenfrei https://www.mdpi.com/2075-4701/12/12/2171 kostenfrei https://doaj.org/toc/2075-4701 Journal toc kostenfrei GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_2055 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700 AR 12 2022 12, p 2171
language	English
source	In Metals 12(2022), 12, p 2171 volume:12 year:2022 number:12, p 2171
sourceStr	In Metals 12(2022), 12, p 2171 volume:12 year:2022 number:12, p 2171
format_phy_str_mv	Article
institution	findex.gbv.de
topic_facet	CNTs composites stir casting wear Mining engineering. Metallurgy
isfreeaccess_bool	true
container_title	Metals
authorswithroles_txt_mv	Li Wang @@aut@@ Zhenlin Zhang @@aut@@ Yajun Luo @@aut@@ Ying Xiao @@aut@@ Fengliang Tan @@aut@@ Kecai Liu @@aut@@
publishDateDaySort_date	2022-01-01T00:00:00Z
hierarchy_top_id	718627172
id	DOAJ083026541
language_de	englisch
fullrecord	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">DOAJ083026541</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20240414150450.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230311s2022 xx \|\|\|\|\|o 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.3390/met12122171</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)DOAJ083026541</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="050" ind1=" " ind2="0"><subfield code="a">TN1-997</subfield></datafield><datafield tag="100" ind1="0" ind2=" "><subfield code="a">Li Wang</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2022</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">CNTs</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">composites</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">stir casting</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">wear</subfield></datafield><datafield tag="653" ind1=" " ind2="0"><subfield code="a">Mining engineering. Metallurgy</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Zhenlin Zhang</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Yajun Luo</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Ying Xiao</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Fengliang Tan</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Kecai Liu</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">Metals</subfield><subfield code="d">MDPI AG, 2012</subfield><subfield code="g">12(2022), 12, p 2171</subfield><subfield code="w">(DE-627)718627172</subfield><subfield code="w">(DE-600)2662252-X</subfield><subfield code="x">20754701</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:12</subfield><subfield code="g">year:2022</subfield><subfield code="g">number:12, p 2171</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.3390/met12122171</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://www.mdpi.com/2075-4701/12/12/2171</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/2075-4701</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_DOAJ</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2055</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4012</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4367</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">12</subfield><subfield code="j">2022</subfield><subfield code="e">12, p 2171</subfield></datafield></record></collection>
callnumber-first	T - Technology
author	Li Wang
spellingShingle	Li Wang misc TN1-997 misc CNTs misc composites misc stir casting misc wear misc Mining engineering. Metallurgy Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys
authorStr	Li Wang
ppnlink_with_tag_str_mv	@@773@@(DE-627)718627172
format	electronic Article
delete_txt_mv	keep
author_role	aut aut aut aut aut aut
collection	DOAJ
remote_str	true
callnumber-label	TN1-997
illustrated	Not Illustrated
issn	20754701
topic_title	TN1-997 Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys CNTs composites stir casting wear
topic	misc TN1-997 misc CNTs misc composites misc stir casting misc wear misc Mining engineering. Metallurgy
topic_unstemmed	misc TN1-997 misc CNTs misc composites misc stir casting misc wear misc Mining engineering. Metallurgy
topic_browse	misc TN1-997 misc CNTs misc composites misc stir casting misc wear misc Mining engineering. Metallurgy
format_facet	Elektronische Aufsätze Aufsätze Elektronische Ressource
format_main_str_mv	Text Zeitschrift/Artikel
carriertype_str_mv	cr
hierarchy_parent_title	Metals
hierarchy_parent_id	718627172
hierarchy_top_title	Metals
isfreeaccess_txt	true
familylinks_str_mv	(DE-627)718627172 (DE-600)2662252-X
title	Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys
ctrlnum	(DE-627)DOAJ083026541 (DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56
title_full	Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys
author_sort	Li Wang
journal	Metals
journalStr	Metals
callnumber-first-code	T
lang_code	eng
isOA_bool	true
recordtype	marc
publishDateSort	2022
contenttype_str_mv	txt
author_browse	Li Wang Zhenlin Zhang Yajun Luo Ying Xiao Fengliang Tan Kecai Liu
container_volume	12
class	TN1-997
format_se	Elektronische Aufsätze
author-letter	Li Wang
doi_str_mv	10.3390/met12122171
author2-role	verfasserin
title_sort	understanding the influencing mechanism of cnts on the microstructures and wear characterization of semi-solid stir casting al-cu-mg-si alloys
callnumber	TN1-997
title_auth	Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys
abstract	In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively.
abstractGer	In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively.
abstract_unstemmed	In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively.
collection_details	GBV_USEFLAG_A SYSFLAG_A GBV_DOAJ GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_95 GBV_ILN_105 GBV_ILN_110 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_213 GBV_ILN_230 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_2014 GBV_ILN_2055 GBV_ILN_4012 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4249 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4367 GBV_ILN_4700
container_issue	12, p 2171
title_short	Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys
url	https://doi.org/10.3390/met12122171 https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56 https://www.mdpi.com/2075-4701/12/12/2171 https://doaj.org/toc/2075-4701
remote_bool	true
author2	Zhenlin Zhang Yajun Luo Ying Xiao Fengliang Tan Kecai Liu
author2Str	Zhenlin Zhang Yajun Luo Ying Xiao Fengliang Tan Kecai Liu
ppnlink	718627172
callnumber-subject	TN - Mining Engineering and Metallurgy
mediatype_str_mv	c
isOA_txt	true
hochschulschrift_bool	false
doi_str	10.3390/met12122171
callnumber-a	TN1-997
up_date	2024-07-03T15:08:25.438Z
_version_	1803570963224199168
fullrecord_marcxml	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">DOAJ083026541</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20240414150450.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230311s2022 xx \|\|\|\|\|o 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.3390/met12122171</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)DOAJ083026541</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)DOAJ1ee7e3203b854b5ab4feddbf38d97c56</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="050" ind1=" " ind2="0"><subfield code="a">TN1-997</subfield></datafield><datafield tag="100" ind1="0" ind2=" "><subfield code="a">Li Wang</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2022</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analysis of the CNT/Al-Cu-Mg-Si composites were characterized by an Optical microscope, Scanning Electron Microscope (SEM), and XRD. Additionally, density, hardness, and wear were measured. The results revealed that the addition of CNTs effectively inhibited the growth of α-Al grains, and the grains were dramatically refined. Additionally, the dynamic recrystallization degree of the composite extruded rod gradually increased from 1.3% to 68.4%, with the content of CNTs from 0 wt% to 3.0 wt%. The hardness values of the composite increased with an increase in CNTs. Moreover, the friction factor and wear rate of the composites first decreased and then increased as the content of CNTs increased. When 1.5CNTs were added, the friction coefficient (COF) and wear rate of composites reached the minimum of 0.3577 and 3.42 mg/km, which were reduced by 30.09% and 73.03% compared with Al-Cu-Mg-Si alloy, respectively.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">CNTs</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">composites</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">stir casting</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">wear</subfield></datafield><datafield tag="653" ind1=" " ind2="0"><subfield code="a">Mining engineering. Metallurgy</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Zhenlin Zhang</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Yajun Luo</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Ying Xiao</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Fengliang Tan</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Kecai Liu</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">Metals</subfield><subfield code="d">MDPI AG, 2012</subfield><subfield code="g">12(2022), 12, p 2171</subfield><subfield code="w">(DE-627)718627172</subfield><subfield code="w">(DE-600)2662252-X</subfield><subfield code="x">20754701</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:12</subfield><subfield code="g">year:2022</subfield><subfield code="g">number:12, p 2171</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.3390/met12122171</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doaj.org/article/1ee7e3203b854b5ab4feddbf38d97c56</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://www.mdpi.com/2075-4701/12/12/2171</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">https://doaj.org/toc/2075-4701</subfield><subfield code="y">Journal toc</subfield><subfield code="z">kostenfrei</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_DOAJ</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2055</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4012</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4367</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">12</subfield><subfield code="j">2022</subfield><subfield code="e">12, p 2171</subfield></datafield></record></collection>
score	7.402815

Nicht das Richtige dabei?

Schreiben Sie uns!

Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys

Nicht das Richtige dabei?

Zugang & Verfügbarkeit

Vorhandene Bände

Nicht das Richtige dabei?