Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel
Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry...
Ausführliche Beschreibung
Gespeichert in:
| Autor*in: |
Zhang, Kedong [verfasserIn] Guo, Xuhong [verfasserIn] Sun, Lining [verfasserIn] Meng, Xiangfeng [verfasserIn] Xing, Youqiang [verfasserIn] |
|---|
| Format: |
E-Artikel |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
2019 |
|---|
| Schlagwörter: |
|---|
| Übergeordnetes Werk: |
Enthalten in: Journal of manufacturing processes - Dearborn, Mich. : Soc., 1999, 42, Seite 28-40 |
|---|---|
| Übergeordnetes Werk: |
volume:42 ; pages:28-40 |
| DOI / URN: |
10.1016/j.jmapro.2019.04.009 |
|---|
| Katalog-ID: |
ELV002262045 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | ELV002262045 | ||
| 003 | DE-627 | ||
| 005 | 20230524121619.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 230429s2019 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1016/j.jmapro.2019.04.009 |2 doi | |
| 035 | |a (DE-627)ELV002262045 | ||
| 035 | |a (ELSEVIER)S1526-6125(18)31649-9 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rda | ||
| 041 | |a eng | ||
| 082 | 0 | 4 | |a 650 |a 620 |a 004 |q DE-600 |
| 100 | 1 | |a Zhang, Kedong |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel |
| 264 | 1 | |c 2019 | |
| 336 | |a nicht spezifiziert |b zzz |2 rdacontent | ||
| 337 | |a Computermedien |b c |2 rdamedia | ||
| 338 | |a Online-Ressource |b cr |2 rdacarrier | ||
| 520 | |a Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. | ||
| 650 | 4 | |a Green manufacturing | |
| 650 | 4 | |a Femtosecond laser | |
| 650 | 4 | |a PVD hard coatings | |
| 650 | 4 | |a Selective laser melting | |
| 700 | 1 | |a Guo, Xuhong |e verfasserin |4 aut | |
| 700 | 1 | |a Sun, Lining |e verfasserin |4 aut | |
| 700 | 1 | |a Meng, Xiangfeng |e verfasserin |4 aut | |
| 700 | 1 | |a Xing, Youqiang |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Journal of manufacturing processes |d Dearborn, Mich. : Soc., 1999 |g 42, Seite 28-40 |h Online-Ressource |w (DE-627)472650998 |w (DE-600)2168529-0 |w (DE-576)302969888 |7 nnns |
| 773 | 1 | 8 | |g volume:42 |g pages:28-40 |
| 912 | |a GBV_USEFLAG_U | ||
| 912 | |a SYSFLAG_U | ||
| 912 | |a GBV_ELV | ||
| 912 | |a GBV_ILN_20 | ||
| 912 | |a GBV_ILN_22 | ||
| 912 | |a GBV_ILN_23 | ||
| 912 | |a GBV_ILN_24 | ||
| 912 | |a GBV_ILN_31 | ||
| 912 | |a GBV_ILN_32 | ||
| 912 | |a GBV_ILN_40 | ||
| 912 | |a GBV_ILN_60 | ||
| 912 | |a GBV_ILN_62 | ||
| 912 | |a GBV_ILN_63 | ||
| 912 | |a GBV_ILN_65 | ||
| 912 | |a GBV_ILN_69 | ||
| 912 | |a GBV_ILN_70 | ||
| 912 | |a GBV_ILN_73 | ||
| 912 | |a GBV_ILN_74 | ||
| 912 | |a GBV_ILN_90 | ||
| 912 | |a GBV_ILN_95 | ||
| 912 | |a GBV_ILN_100 | ||
| 912 | |a GBV_ILN_101 | ||
| 912 | |a GBV_ILN_105 | ||
| 912 | |a GBV_ILN_110 | ||
| 912 | |a GBV_ILN_150 | ||
| 912 | |a GBV_ILN_151 | ||
| 912 | |a GBV_ILN_224 | ||
| 912 | |a GBV_ILN_370 | ||
| 912 | |a GBV_ILN_602 | ||
| 912 | |a GBV_ILN_702 | ||
| 912 | |a GBV_ILN_2001 | ||
| 912 | |a GBV_ILN_2003 | ||
| 912 | |a GBV_ILN_2004 | ||
| 912 | |a GBV_ILN_2005 | ||
| 912 | |a GBV_ILN_2006 | ||
| 912 | |a GBV_ILN_2008 | ||
| 912 | |a GBV_ILN_2011 | ||
| 912 | |a GBV_ILN_2014 | ||
| 912 | |a GBV_ILN_2015 | ||
| 912 | |a GBV_ILN_2020 | ||
| 912 | |a GBV_ILN_2021 | ||
| 912 | |a GBV_ILN_2025 | ||
| 912 | |a GBV_ILN_2026 | ||
| 912 | |a GBV_ILN_2027 | ||
| 912 | |a GBV_ILN_2034 | ||
| 912 | |a GBV_ILN_2038 | ||
| 912 | |a GBV_ILN_2044 | ||
| 912 | |a GBV_ILN_2048 | ||
| 912 | |a GBV_ILN_2049 | ||
| 912 | |a GBV_ILN_2050 | ||
| 912 | |a GBV_ILN_2055 | ||
| 912 | |a GBV_ILN_2056 | ||
| 912 | |a GBV_ILN_2059 | ||
| 912 | |a GBV_ILN_2061 | ||
| 912 | |a GBV_ILN_2064 | ||
| 912 | |a GBV_ILN_2065 | ||
| 912 | |a GBV_ILN_2068 | ||
| 912 | |a GBV_ILN_2088 | ||
| 912 | |a GBV_ILN_2111 | ||
| 912 | |a GBV_ILN_2112 | ||
| 912 | |a GBV_ILN_2113 | ||
| 912 | |a GBV_ILN_2118 | ||
| 912 | |a GBV_ILN_2122 | ||
| 912 | |a GBV_ILN_2129 | ||
| 912 | |a GBV_ILN_2143 | ||
| 912 | |a GBV_ILN_2147 | ||
| 912 | |a GBV_ILN_2148 | ||
| 912 | |a GBV_ILN_2152 | ||
| 912 | |a GBV_ILN_2153 | ||
| 912 | |a GBV_ILN_2190 | ||
| 912 | |a GBV_ILN_2232 | ||
| 912 | |a GBV_ILN_2336 | ||
| 912 | |a GBV_ILN_2470 | ||
| 912 | |a GBV_ILN_2507 | ||
| 912 | |a GBV_ILN_2522 | ||
| 912 | |a GBV_ILN_4035 | ||
| 912 | |a GBV_ILN_4037 | ||
| 912 | |a GBV_ILN_4112 | ||
| 912 | |a GBV_ILN_4125 | ||
| 912 | |a GBV_ILN_4126 | ||
| 912 | |a GBV_ILN_4242 | ||
| 912 | |a GBV_ILN_4251 | ||
| 912 | |a GBV_ILN_4305 | ||
| 912 | |a GBV_ILN_4313 | ||
| 912 | |a GBV_ILN_4322 | ||
| 912 | |a GBV_ILN_4323 | ||
| 912 | |a GBV_ILN_4324 | ||
| 912 | |a GBV_ILN_4325 | ||
| 912 | |a GBV_ILN_4326 | ||
| 912 | |a GBV_ILN_4333 | ||
| 912 | |a GBV_ILN_4334 | ||
| 912 | |a GBV_ILN_4335 | ||
| 912 | |a GBV_ILN_4338 | ||
| 912 | |a GBV_ILN_4393 | ||
| 951 | |a AR | ||
| 952 | |d 42 |h 28-40 | ||
| author_variant |
k z kz x g xg l s ls x m xm y x yx |
|---|---|
| matchkey_str |
zhangkedongguoxuhongsunliningmengxiangfe:2019----:arctoocaetowtfmoeodaeperamnadtctigefracidya |
| hierarchy_sort_str |
2019 |
| publishDate |
2019 |
| allfields |
10.1016/j.jmapro.2019.04.009 doi (DE-627)ELV002262045 (ELSEVIER)S1526-6125(18)31649-9 DE-627 ger DE-627 rda eng 650 620 004 DE-600 Zhang, Kedong verfasserin aut Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel 2019 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. Green manufacturing Femtosecond laser PVD hard coatings Selective laser melting Guo, Xuhong verfasserin aut Sun, Lining verfasserin aut Meng, Xiangfeng verfasserin aut Xing, Youqiang verfasserin aut Enthalten in Journal of manufacturing processes Dearborn, Mich. : Soc., 1999 42, Seite 28-40 Online-Ressource (DE-627)472650998 (DE-600)2168529-0 (DE-576)302969888 nnns volume:42 pages:28-40 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_101 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2008 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2034 GBV_ILN_2038 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2088 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2118 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2470 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 AR 42 28-40 |
| spelling |
10.1016/j.jmapro.2019.04.009 doi (DE-627)ELV002262045 (ELSEVIER)S1526-6125(18)31649-9 DE-627 ger DE-627 rda eng 650 620 004 DE-600 Zhang, Kedong verfasserin aut Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel 2019 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. Green manufacturing Femtosecond laser PVD hard coatings Selective laser melting Guo, Xuhong verfasserin aut Sun, Lining verfasserin aut Meng, Xiangfeng verfasserin aut Xing, Youqiang verfasserin aut Enthalten in Journal of manufacturing processes Dearborn, Mich. : Soc., 1999 42, Seite 28-40 Online-Ressource (DE-627)472650998 (DE-600)2168529-0 (DE-576)302969888 nnns volume:42 pages:28-40 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_101 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2008 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2034 GBV_ILN_2038 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2088 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2118 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2470 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 AR 42 28-40 |
| allfields_unstemmed |
10.1016/j.jmapro.2019.04.009 doi (DE-627)ELV002262045 (ELSEVIER)S1526-6125(18)31649-9 DE-627 ger DE-627 rda eng 650 620 004 DE-600 Zhang, Kedong verfasserin aut Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel 2019 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. Green manufacturing Femtosecond laser PVD hard coatings Selective laser melting Guo, Xuhong verfasserin aut Sun, Lining verfasserin aut Meng, Xiangfeng verfasserin aut Xing, Youqiang verfasserin aut Enthalten in Journal of manufacturing processes Dearborn, Mich. : Soc., 1999 42, Seite 28-40 Online-Ressource (DE-627)472650998 (DE-600)2168529-0 (DE-576)302969888 nnns volume:42 pages:28-40 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_101 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2008 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2034 GBV_ILN_2038 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2088 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2118 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2470 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 AR 42 28-40 |
| allfieldsGer |
10.1016/j.jmapro.2019.04.009 doi (DE-627)ELV002262045 (ELSEVIER)S1526-6125(18)31649-9 DE-627 ger DE-627 rda eng 650 620 004 DE-600 Zhang, Kedong verfasserin aut Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel 2019 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. Green manufacturing Femtosecond laser PVD hard coatings Selective laser melting Guo, Xuhong verfasserin aut Sun, Lining verfasserin aut Meng, Xiangfeng verfasserin aut Xing, Youqiang verfasserin aut Enthalten in Journal of manufacturing processes Dearborn, Mich. : Soc., 1999 42, Seite 28-40 Online-Ressource (DE-627)472650998 (DE-600)2168529-0 (DE-576)302969888 nnns volume:42 pages:28-40 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_101 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2008 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2034 GBV_ILN_2038 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2088 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2118 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2470 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 AR 42 28-40 |
| allfieldsSound |
10.1016/j.jmapro.2019.04.009 doi (DE-627)ELV002262045 (ELSEVIER)S1526-6125(18)31649-9 DE-627 ger DE-627 rda eng 650 620 004 DE-600 Zhang, Kedong verfasserin aut Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel 2019 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. Green manufacturing Femtosecond laser PVD hard coatings Selective laser melting Guo, Xuhong verfasserin aut Sun, Lining verfasserin aut Meng, Xiangfeng verfasserin aut Xing, Youqiang verfasserin aut Enthalten in Journal of manufacturing processes Dearborn, Mich. : Soc., 1999 42, Seite 28-40 Online-Ressource (DE-627)472650998 (DE-600)2168529-0 (DE-576)302969888 nnns volume:42 pages:28-40 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_101 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2008 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2034 GBV_ILN_2038 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2088 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2118 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2470 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 AR 42 28-40 |
| language |
English |
| source |
Enthalten in Journal of manufacturing processes 42, Seite 28-40 volume:42 pages:28-40 |
| sourceStr |
Enthalten in Journal of manufacturing processes 42, Seite 28-40 volume:42 pages:28-40 |
| format_phy_str_mv |
Article |
| institution |
findex.gbv.de |
| topic_facet |
Green manufacturing Femtosecond laser PVD hard coatings Selective laser melting |
| dewey-raw |
650 |
| isfreeaccess_bool |
false |
| container_title |
Journal of manufacturing processes |
| authorswithroles_txt_mv |
Zhang, Kedong @@aut@@ Guo, Xuhong @@aut@@ Sun, Lining @@aut@@ Meng, Xiangfeng @@aut@@ Xing, Youqiang @@aut@@ |
| publishDateDaySort_date |
2019-01-01T00:00:00Z |
| hierarchy_top_id |
472650998 |
| dewey-sort |
3650 |
| id |
ELV002262045 |
| language_de |
englisch |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">ELV002262045</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230524121619.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230429s2019 xx |||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1016/j.jmapro.2019.04.009</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)ELV002262045</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ELSEVIER)S1526-6125(18)31649-9</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">650</subfield><subfield code="a">620</subfield><subfield code="a">004</subfield><subfield code="q">DE-600</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Zhang, Kedong</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2019</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Green manufacturing</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Femtosecond laser</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">PVD hard coatings</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Selective laser melting</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Guo, Xuhong</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Sun, Lining</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Meng, Xiangfeng</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Xing, Youqiang</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">Journal of manufacturing processes</subfield><subfield code="d">Dearborn, Mich. : Soc., 1999</subfield><subfield code="g">42, Seite 28-40</subfield><subfield code="h">Online-Ressource</subfield><subfield code="w">(DE-627)472650998</subfield><subfield code="w">(DE-600)2168529-0</subfield><subfield code="w">(DE-576)302969888</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:42</subfield><subfield code="g">pages:28-40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ELV</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_31</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_32</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_90</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_100</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_101</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_150</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_224</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_702</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2001</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2003</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2004</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2005</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2006</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2008</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2011</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2015</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2025</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2026</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2027</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2034</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2038</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2044</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2048</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2049</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2050</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2055</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2056</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2059</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2061</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2064</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2065</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2068</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2088</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2111</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2113</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2118</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2122</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2129</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2143</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2147</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2148</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2152</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2153</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2190</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2232</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2336</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2470</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2507</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2522</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4035</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4242</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4251</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4326</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4333</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4334</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4393</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">42</subfield><subfield code="h">28-40</subfield></datafield></record></collection>
|
| author |
Zhang, Kedong |
| spellingShingle |
Zhang, Kedong ddc 650 misc Green manufacturing misc Femtosecond laser misc PVD hard coatings misc Selective laser melting Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel |
| authorStr |
Zhang, Kedong |
| ppnlink_with_tag_str_mv |
@@773@@(DE-627)472650998 |
| format |
electronic Article |
| dewey-ones |
650 - Management & auxiliary services 620 - Engineering & allied operations 004 - Data processing & computer science |
| delete_txt_mv |
keep |
| author_role |
aut aut aut aut aut |
| collection |
elsevier |
| remote_str |
true |
| illustrated |
Not Illustrated |
| topic_title |
650 620 004 DE-600 Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel Green manufacturing Femtosecond laser PVD hard coatings Selective laser melting |
| topic |
ddc 650 misc Green manufacturing misc Femtosecond laser misc PVD hard coatings misc Selective laser melting |
| topic_unstemmed |
ddc 650 misc Green manufacturing misc Femtosecond laser misc PVD hard coatings misc Selective laser melting |
| topic_browse |
ddc 650 misc Green manufacturing misc Femtosecond laser misc PVD hard coatings misc Selective laser melting |
| format_facet |
Elektronische Aufsätze Aufsätze Elektronische Ressource |
| format_main_str_mv |
Text Zeitschrift/Artikel |
| carriertype_str_mv |
cr |
| hierarchy_parent_title |
Journal of manufacturing processes |
| hierarchy_parent_id |
472650998 |
| dewey-tens |
650 - Management & public relations 620 - Engineering 000 - Computer science, knowledge & systems |
| hierarchy_top_title |
Journal of manufacturing processes |
| isfreeaccess_txt |
false |
| familylinks_str_mv |
(DE-627)472650998 (DE-600)2168529-0 (DE-576)302969888 |
| title |
Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel |
| ctrlnum |
(DE-627)ELV002262045 (ELSEVIER)S1526-6125(18)31649-9 |
| title_full |
Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel |
| author_sort |
Zhang, Kedong |
| journal |
Journal of manufacturing processes |
| journalStr |
Journal of manufacturing processes |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology 000 - Computer science, information & general works |
| recordtype |
marc |
| publishDateSort |
2019 |
| contenttype_str_mv |
zzz |
| container_start_page |
28 |
| author_browse |
Zhang, Kedong Guo, Xuhong Sun, Lining Meng, Xiangfeng Xing, Youqiang |
| container_volume |
42 |
| class |
650 620 004 DE-600 |
| format_se |
Elektronische Aufsätze |
| author-letter |
Zhang, Kedong |
| doi_str_mv |
10.1016/j.jmapro.2019.04.009 |
| dewey-full |
650 620 004 |
| author2-role |
verfasserin |
| title_sort |
fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining slm-produced stainless steel |
| title_auth |
Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel |
| abstract |
Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. |
| abstractGer |
Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. |
| abstract_unstemmed |
Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed. |
| collection_details |
GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_101 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2008 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2034 GBV_ILN_2038 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2088 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2118 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2470 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 |
| title_short |
Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel |
| remote_bool |
true |
| author2 |
Guo, Xuhong Sun, Lining Meng, Xiangfeng Xing, Youqiang |
| author2Str |
Guo, Xuhong Sun, Lining Meng, Xiangfeng Xing, Youqiang |
| ppnlink |
472650998 |
| mediatype_str_mv |
c |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| doi_str |
10.1016/j.jmapro.2019.04.009 |
| up_date |
2024-07-07T00:08:53.841Z |
| _version_ |
1803876757765357568 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">ELV002262045</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230524121619.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230429s2019 xx |||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1016/j.jmapro.2019.04.009</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)ELV002262045</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ELSEVIER)S1526-6125(18)31649-9</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">650</subfield><subfield code="a">620</subfield><subfield code="a">004</subfield><subfield code="q">DE-600</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Zhang, Kedong</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Fabrication of coated tool with femtosecond laser pretreatment and its cutting performance in dry machining SLM-produced stainless steel</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2019</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Selective Laser Melting (SLM) technique applied to the stainless steel has been developing rapidly in the biomedical and aerospace industries. However, a post-machining is still needed to efficiently improve the surface finish and dimensional precision of the SLM-produced stainless steel parts. Dry machining (machining without the using of cutting fluid) is attracting interest around the world, which can reach green manufacturing without water pollution, residue on the swarf, and danger to health. In this work, to achieve the green finishing machining of SLM-produced AISI 316 L stainless steel, the hard coated tools with a nanotextured substrate were designed, and the key preparation methods of this developed tools were presented. First, a periodic nano-ripple structure (nanotexture) was induced by femtosecond laser scanning on the WC/Co substrate tool with different processing parameters, then TiAlN film was deposited on the nanotextured substrate surface using the cathode arc-evaporation technique without employing any interlayer. The surface micro-topography and mechanical property of the nanotextured TiAlN coated surface were studied. Machining tests without cutting fluid were performed on the SLM-produced stainless steel using the developed tool, and the cutting tool without laser pretreatment was also employed for the comparison. The obtained results demonstrate that, the TiAlN coatings adhesiveness is significantly enhanced by the femtosecond laser-induced periodic structure on the WC/Co substrate, and the critical load of the TiAlN coatings is increased from 57 to 73 N. The improved machining performances of nanotextured tools in drying cutting SLM 316 L stainless steel are achieved, resulting in a decrease of 10–20% in cutting forces, a decrease of 10–15% in cutting temperature and a high surface quality of the machined workpieces at the high cutting speed. The possible mechanisms for the effects of femtosecond laser pretreatment are discussed.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Green manufacturing</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Femtosecond laser</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">PVD hard coatings</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Selective laser melting</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Guo, Xuhong</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Sun, Lining</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Meng, Xiangfeng</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Xing, Youqiang</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">Journal of manufacturing processes</subfield><subfield code="d">Dearborn, Mich. : Soc., 1999</subfield><subfield code="g">42, Seite 28-40</subfield><subfield code="h">Online-Ressource</subfield><subfield code="w">(DE-627)472650998</subfield><subfield code="w">(DE-600)2168529-0</subfield><subfield code="w">(DE-576)302969888</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:42</subfield><subfield code="g">pages:28-40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ELV</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_31</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_32</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_90</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_100</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_101</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_150</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_224</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_702</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2001</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2003</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2004</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2005</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2006</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2008</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2011</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2015</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2025</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2026</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2027</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2034</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2038</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2044</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2048</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2049</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2050</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2055</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2056</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2059</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2061</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2064</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2065</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2068</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2088</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2111</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2113</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2118</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2122</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2129</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2143</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2147</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2148</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2152</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2153</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2190</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2232</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2336</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2470</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2507</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2522</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4035</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4242</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4251</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4326</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4333</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4334</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4393</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">42</subfield><subfield code="h">28-40</subfield></datafield></record></collection>
|
| score |
7.400504 |