Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions

Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow ex...
Ausführliche Beschreibung

Gespeichert in:

Autor*in:	Meyer, M.C. [verfasserIn] Yin, S. [verfasserIn] McDonnell, K.A. [verfasserIn] Stier, O. [verfasserIn] Lupoi, R. [verfasserIn]

Format:	E-Artikel
Sprache:	Englisch

Erschienen:	2016

Schlagwörter:	Cold Spray Particle velocity Feed rate CFD PIV

Übergeordnetes Werk:	Enthalten in: Surface and coatings technology - Amsterdam [u.a.] : Elsevier Science, 1986, 304, Seite 237-245
Übergeordnetes Werk:	volume:304 ; pages:237-245

DOI / URN:	10.1016/j.surfcoat.2016.07.017

Katalog-ID:	ELV007183461

Internformat


LEADER	01000caa a22002652 4500
001	ELV007183461
003	DE-627
005	20230524150602.0
007	cr uuu---uuuuu
008	230506s2016 xx \|\|\|\|\|o 00\| \|\|eng c
024	7		\|a 10.1016/j.surfcoat.2016.07.017 \|2 doi
035			\|a (DE-627)ELV007183461
035			\|a (ELSEVIER)S0257-8972(16)30596-5
040			\|a DE-627 \|b ger \|c DE-627 \|e rda
041			\|a eng
082	0	4	\|a 620 \|a 670 \|q DE-600
084			\|a 52.78 \|2 bkl
084			\|a 51.20 \|2 bkl
100	1		\|a Meyer, M.C. \|e verfasserin \|4 aut
245	1	0	\|a Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions
264		1	\|c 2016
336			\|a nicht spezifiziert \|b zzz \|2 rdacontent
337			\|a Computermedien \|b c \|2 rdamedia
338			\|a Online-Ressource \|b cr \|2 rdacarrier
520			\|a Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD).
650		4	\|a Cold Spray
650		4	\|a Particle velocity
650		4	\|a Feed rate
650		4	\|a CFD
650		4	\|a PIV
700	1		\|a Yin, S. \|e verfasserin \|4 aut
700	1		\|a McDonnell, K.A. \|e verfasserin \|4 aut
700	1		\|a Stier, O. \|e verfasserin \|4 aut
700	1		\|a Lupoi, R. \|e verfasserin \|4 aut
773	0	8	\|i Enthalten in \|t Surface and coatings technology \|d Amsterdam [u.a.] : Elsevier Science, 1986 \|g 304, Seite 237-245 \|h Online-Ressource \|w (DE-627)308447522 \|w (DE-600)1502240-7 \|w (DE-576)098474049 \|x 0257-8972 \|7 nnns
773	1	8	\|g volume:304 \|g pages:237-245
912			\|a GBV_USEFLAG_U
912			\|a SYSFLAG_U
912			\|a GBV_ELV
912			\|a GBV_ILN_20
912			\|a GBV_ILN_22
912			\|a GBV_ILN_23
912			\|a GBV_ILN_24
912			\|a GBV_ILN_31
912			\|a GBV_ILN_32
912			\|a GBV_ILN_40
912			\|a GBV_ILN_60
912			\|a GBV_ILN_62
912			\|a GBV_ILN_63
912			\|a GBV_ILN_65
912			\|a GBV_ILN_69
912			\|a GBV_ILN_70
912			\|a GBV_ILN_73
912			\|a GBV_ILN_74
912			\|a GBV_ILN_90
912			\|a GBV_ILN_95
912			\|a GBV_ILN_100
912			\|a GBV_ILN_105
912			\|a GBV_ILN_110
912			\|a GBV_ILN_150
912			\|a GBV_ILN_151
912			\|a GBV_ILN_187
912			\|a GBV_ILN_224
912			\|a GBV_ILN_370
912			\|a GBV_ILN_602
912			\|a GBV_ILN_702
912			\|a GBV_ILN_2001
912			\|a GBV_ILN_2003
912			\|a GBV_ILN_2004
912			\|a GBV_ILN_2005
912			\|a GBV_ILN_2007
912			\|a GBV_ILN_2009
912			\|a GBV_ILN_2011
912			\|a GBV_ILN_2014
912			\|a GBV_ILN_2015
912			\|a GBV_ILN_2020
912			\|a GBV_ILN_2021
912			\|a GBV_ILN_2025
912			\|a GBV_ILN_2026
912			\|a GBV_ILN_2027
912			\|a GBV_ILN_2031
912			\|a GBV_ILN_2034
912			\|a GBV_ILN_2037
912			\|a GBV_ILN_2038
912			\|a GBV_ILN_2039
912			\|a GBV_ILN_2044
912			\|a GBV_ILN_2048
912			\|a GBV_ILN_2049
912			\|a GBV_ILN_2050
912			\|a GBV_ILN_2055
912			\|a GBV_ILN_2056
912			\|a GBV_ILN_2059
912			\|a GBV_ILN_2061
912			\|a GBV_ILN_2064
912			\|a GBV_ILN_2065
912			\|a GBV_ILN_2068
912			\|a GBV_ILN_2070
912			\|a GBV_ILN_2086
912			\|a GBV_ILN_2098
912			\|a GBV_ILN_2106
912			\|a GBV_ILN_2108
912			\|a GBV_ILN_2110
912			\|a GBV_ILN_2111
912			\|a GBV_ILN_2112
912			\|a GBV_ILN_2113
912			\|a GBV_ILN_2116
912			\|a GBV_ILN_2118
912			\|a GBV_ILN_2119
912			\|a GBV_ILN_2122
912			\|a GBV_ILN_2129
912			\|a GBV_ILN_2143
912			\|a GBV_ILN_2144
912			\|a GBV_ILN_2147
912			\|a GBV_ILN_2148
912			\|a GBV_ILN_2152
912			\|a GBV_ILN_2153
912			\|a GBV_ILN_2188
912			\|a GBV_ILN_2190
912			\|a GBV_ILN_2232
912			\|a GBV_ILN_2336
912			\|a GBV_ILN_2507
912			\|a GBV_ILN_2522
912			\|a GBV_ILN_4035
912			\|a GBV_ILN_4037
912			\|a GBV_ILN_4112
912			\|a GBV_ILN_4125
912			\|a GBV_ILN_4126
912			\|a GBV_ILN_4242
912			\|a GBV_ILN_4251
912			\|a GBV_ILN_4305
912			\|a GBV_ILN_4313
912			\|a GBV_ILN_4323
912			\|a GBV_ILN_4324
912			\|a GBV_ILN_4326
912			\|a GBV_ILN_4333
912			\|a GBV_ILN_4334
912			\|a GBV_ILN_4335
912			\|a GBV_ILN_4338
912			\|a GBV_ILN_4393
936	b	k	\|a 52.78 \|j Oberflächentechnik \|j Wärmebehandlung
936	b	k	\|a 51.20 \|j Werkstoffoberflächeneigenschaften
951			\|a AR
952			\|d 304 \|h 237-245

Indexfelder

author_variant	m m mm s y sy k m km o s os r l rl
matchkey_str	article:02578972:2016----::edaefetnatcltaclrtoiclsrynelwtg
hierarchy_sort_str	2016
bklnumber	52.78 51.20
publishDate	2016
allfields	10.1016/j.surfcoat.2016.07.017 doi (DE-627)ELV007183461 (ELSEVIER)S0257-8972(16)30596-5 DE-627 ger DE-627 rda eng 620 670 DE-600 52.78 bkl 51.20 bkl Meyer, M.C. verfasserin aut Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions 2016 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD). Cold Spray Particle velocity Feed rate CFD PIV Yin, S. verfasserin aut McDonnell, K.A. verfasserin aut Stier, O. verfasserin aut Lupoi, R. verfasserin aut Enthalten in Surface and coatings technology Amsterdam [u.a.] : Elsevier Science, 1986 304, Seite 237-245 Online-Ressource (DE-627)308447522 (DE-600)1502240-7 (DE-576)098474049 0257-8972 nnns volume:304 pages:237-245 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_187 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2007 GBV_ILN_2009 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2098 GBV_ILN_2106 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 52.78 Oberflächentechnik Wärmebehandlung 51.20 Werkstoffoberflächeneigenschaften AR 304 237-245
spelling	10.1016/j.surfcoat.2016.07.017 doi (DE-627)ELV007183461 (ELSEVIER)S0257-8972(16)30596-5 DE-627 ger DE-627 rda eng 620 670 DE-600 52.78 bkl 51.20 bkl Meyer, M.C. verfasserin aut Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions 2016 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD). Cold Spray Particle velocity Feed rate CFD PIV Yin, S. verfasserin aut McDonnell, K.A. verfasserin aut Stier, O. verfasserin aut Lupoi, R. verfasserin aut Enthalten in Surface and coatings technology Amsterdam [u.a.] : Elsevier Science, 1986 304, Seite 237-245 Online-Ressource (DE-627)308447522 (DE-600)1502240-7 (DE-576)098474049 0257-8972 nnns volume:304 pages:237-245 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_187 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2007 GBV_ILN_2009 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2098 GBV_ILN_2106 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 52.78 Oberflächentechnik Wärmebehandlung 51.20 Werkstoffoberflächeneigenschaften AR 304 237-245
allfields_unstemmed	10.1016/j.surfcoat.2016.07.017 doi (DE-627)ELV007183461 (ELSEVIER)S0257-8972(16)30596-5 DE-627 ger DE-627 rda eng 620 670 DE-600 52.78 bkl 51.20 bkl Meyer, M.C. verfasserin aut Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions 2016 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD). Cold Spray Particle velocity Feed rate CFD PIV Yin, S. verfasserin aut McDonnell, K.A. verfasserin aut Stier, O. verfasserin aut Lupoi, R. verfasserin aut Enthalten in Surface and coatings technology Amsterdam [u.a.] : Elsevier Science, 1986 304, Seite 237-245 Online-Ressource (DE-627)308447522 (DE-600)1502240-7 (DE-576)098474049 0257-8972 nnns volume:304 pages:237-245 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_187 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2007 GBV_ILN_2009 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2098 GBV_ILN_2106 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 52.78 Oberflächentechnik Wärmebehandlung 51.20 Werkstoffoberflächeneigenschaften AR 304 237-245
allfieldsGer	10.1016/j.surfcoat.2016.07.017 doi (DE-627)ELV007183461 (ELSEVIER)S0257-8972(16)30596-5 DE-627 ger DE-627 rda eng 620 670 DE-600 52.78 bkl 51.20 bkl Meyer, M.C. verfasserin aut Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions 2016 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD). Cold Spray Particle velocity Feed rate CFD PIV Yin, S. verfasserin aut McDonnell, K.A. verfasserin aut Stier, O. verfasserin aut Lupoi, R. verfasserin aut Enthalten in Surface and coatings technology Amsterdam [u.a.] : Elsevier Science, 1986 304, Seite 237-245 Online-Ressource (DE-627)308447522 (DE-600)1502240-7 (DE-576)098474049 0257-8972 nnns volume:304 pages:237-245 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_187 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2007 GBV_ILN_2009 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2098 GBV_ILN_2106 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 52.78 Oberflächentechnik Wärmebehandlung 51.20 Werkstoffoberflächeneigenschaften AR 304 237-245
allfieldsSound	10.1016/j.surfcoat.2016.07.017 doi (DE-627)ELV007183461 (ELSEVIER)S0257-8972(16)30596-5 DE-627 ger DE-627 rda eng 620 670 DE-600 52.78 bkl 51.20 bkl Meyer, M.C. verfasserin aut Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions 2016 nicht spezifiziert zzz rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD). Cold Spray Particle velocity Feed rate CFD PIV Yin, S. verfasserin aut McDonnell, K.A. verfasserin aut Stier, O. verfasserin aut Lupoi, R. verfasserin aut Enthalten in Surface and coatings technology Amsterdam [u.a.] : Elsevier Science, 1986 304, Seite 237-245 Online-Ressource (DE-627)308447522 (DE-600)1502240-7 (DE-576)098474049 0257-8972 nnns volume:304 pages:237-245 GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_187 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2007 GBV_ILN_2009 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2098 GBV_ILN_2106 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393 52.78 Oberflächentechnik Wärmebehandlung 51.20 Werkstoffoberflächeneigenschaften AR 304 237-245
language	English
source	Enthalten in Surface and coatings technology 304, Seite 237-245 volume:304 pages:237-245
sourceStr	Enthalten in Surface and coatings technology 304, Seite 237-245 volume:304 pages:237-245
format_phy_str_mv	Article
bklname	Oberflächentechnik Wärmebehandlung Werkstoffoberflächeneigenschaften
institution	findex.gbv.de
topic_facet	Cold Spray Particle velocity Feed rate CFD PIV
dewey-raw	620
isfreeaccess_bool	false
container_title	Surface and coatings technology
authorswithroles_txt_mv	Meyer, M.C. @@aut@@ Yin, S. @@aut@@ McDonnell, K.A. @@aut@@ Stier, O. @@aut@@ Lupoi, R. @@aut@@
publishDateDaySort_date	2016-01-01T00:00:00Z
hierarchy_top_id	308447522
dewey-sort	3620
id	ELV007183461
language_de	englisch
fullrecord	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">ELV007183461</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230524150602.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230506s2016 xx \|\|\|\|\|o 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1016/j.surfcoat.2016.07.017</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)ELV007183461</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ELSEVIER)S0257-8972(16)30596-5</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">620</subfield><subfield code="a">670</subfield><subfield code="q">DE-600</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">52.78</subfield><subfield code="2">bkl</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">51.20</subfield><subfield code="2">bkl</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Meyer, M.C.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2016</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD).</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Cold Spray</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Particle velocity</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Feed rate</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">CFD</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">PIV</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Yin, S.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">McDonnell, K.A.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Stier, O.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Lupoi, R.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">Surface and coatings technology</subfield><subfield code="d">Amsterdam [u.a.] : Elsevier Science, 1986</subfield><subfield code="g">304, Seite 237-245</subfield><subfield code="h">Online-Ressource</subfield><subfield code="w">(DE-627)308447522</subfield><subfield code="w">(DE-600)1502240-7</subfield><subfield code="w">(DE-576)098474049</subfield><subfield code="x">0257-8972</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:304</subfield><subfield code="g">pages:237-245</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ELV</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_31</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_32</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_90</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_100</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_150</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_187</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_224</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_702</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2001</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2003</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2004</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2005</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2007</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2009</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2011</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2015</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2025</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2026</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2027</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2031</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2034</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2038</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2039</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2044</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2048</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2049</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2050</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2055</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2056</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2059</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2061</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2064</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2065</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2068</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2070</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2086</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2098</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2106</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2108</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2111</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2113</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2116</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2118</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2119</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2122</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2129</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2143</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2144</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2147</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2148</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2152</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2153</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2188</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2190</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2232</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2336</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2507</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2522</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4035</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4242</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4251</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4326</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4333</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4334</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4393</subfield></datafield><datafield tag="936" ind1="b" ind2="k"><subfield code="a">52.78</subfield><subfield code="j">Oberflächentechnik</subfield><subfield code="j">Wärmebehandlung</subfield></datafield><datafield tag="936" ind1="b" ind2="k"><subfield code="a">51.20</subfield><subfield code="j">Werkstoffoberflächeneigenschaften</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">304</subfield><subfield code="h">237-245</subfield></datafield></record></collection>
author	Meyer, M.C.
spellingShingle	Meyer, M.C. ddc 620 bkl 52.78 bkl 51.20 misc Cold Spray misc Particle velocity misc Feed rate misc CFD misc PIV Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions
authorStr	Meyer, M.C.
ppnlink_with_tag_str_mv	@@773@@(DE-627)308447522
format	electronic Article
dewey-ones	620 - Engineering & allied operations 670 - Manufacturing
delete_txt_mv	keep
author_role	aut aut aut aut aut
collection	elsevier
remote_str	true
illustrated	Not Illustrated
issn	0257-8972
topic_title	620 670 DE-600 52.78 bkl 51.20 bkl Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions Cold Spray Particle velocity Feed rate CFD PIV
topic	ddc 620 bkl 52.78 bkl 51.20 misc Cold Spray misc Particle velocity misc Feed rate misc CFD misc PIV
topic_unstemmed	ddc 620 bkl 52.78 bkl 51.20 misc Cold Spray misc Particle velocity misc Feed rate misc CFD misc PIV
topic_browse	ddc 620 bkl 52.78 bkl 51.20 misc Cold Spray misc Particle velocity misc Feed rate misc CFD misc PIV
format_facet	Elektronische Aufsätze Aufsätze Elektronische Ressource
format_main_str_mv	Text Zeitschrift/Artikel
carriertype_str_mv	cr
hierarchy_parent_title	Surface and coatings technology
hierarchy_parent_id	308447522
dewey-tens	620 - Engineering 670 - Manufacturing
hierarchy_top_title	Surface and coatings technology
isfreeaccess_txt	false
familylinks_str_mv	(DE-627)308447522 (DE-600)1502240-7 (DE-576)098474049
title	Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions
ctrlnum	(DE-627)ELV007183461 (ELSEVIER)S0257-8972(16)30596-5
title_full	Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions
author_sort	Meyer, M.C.
journal	Surface and coatings technology
journalStr	Surface and coatings technology
lang_code	eng
isOA_bool	false
dewey-hundreds	600 - Technology
recordtype	marc
publishDateSort	2016
contenttype_str_mv	zzz
container_start_page	237
author_browse	Meyer, M.C. Yin, S. McDonnell, K.A. Stier, O. Lupoi, R.
container_volume	304
class	620 670 DE-600 52.78 bkl 51.20 bkl
format_se	Elektronische Aufsätze
author-letter	Meyer, M.C.
doi_str_mv	10.1016/j.surfcoat.2016.07.017
dewey-full	620 670
author2-role	verfasserin
title_sort	feed rate effect on particulate acceleration in cold spray under low stagnation pressure conditions
title_auth	Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions
abstract	Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD).
abstractGer	Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD).
abstract_unstemmed	Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD).
collection_details	GBV_USEFLAG_U SYSFLAG_U GBV_ELV GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_150 GBV_ILN_151 GBV_ILN_187 GBV_ILN_224 GBV_ILN_370 GBV_ILN_602 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2007 GBV_ILN_2009 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2056 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2098 GBV_ILN_2106 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4126 GBV_ILN_4242 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4313 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4338 GBV_ILN_4393
title_short	Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions
remote_bool	true
author2	Yin, S. McDonnell, K.A. Stier, O. Lupoi, R.
author2Str	Yin, S. McDonnell, K.A. Stier, O. Lupoi, R.
ppnlink	308447522
mediatype_str_mv	c
isOA_txt	false
hochschulschrift_bool	false
doi_str	10.1016/j.surfcoat.2016.07.017
up_date	2024-07-06T23:53:31.046Z
_version_	1803875790145716224
fullrecord_marcxml	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">ELV007183461</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230524150602.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">230506s2016 xx \|\|\|\|\|o 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1016/j.surfcoat.2016.07.017</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)ELV007183461</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ELSEVIER)S0257-8972(16)30596-5</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rda</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">620</subfield><subfield code="a">670</subfield><subfield code="q">DE-600</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">52.78</subfield><subfield code="2">bkl</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">51.20</subfield><subfield code="2">bkl</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Meyer, M.C.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2016</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Cold Spray (CS) is an emerging coating process, which is attracting the interest of research and industry due to its rapid solid-state particle deposition mechanism and the advantages over conventional high temperature spray technologies. The acceleration of solid particles by means of a gas flow expanding to supersonic regimes is critical to process efficiency; previous studies rarely address the particle feed rate as an influential parameter for the acceleration. Higher particle feed rates typically result in high solid volume fractions in critical areas of the supersonic nozzle, such as at the throat cross-section. In this study, Particle Image Velocimetry (PIV) was employed to study the feed-rate relationship with particle velocity in CS at low stagnation pressure conditions. The experimental observations were compared against a 2D–axisymmetric Eulerian–Lagrangian model using ANSYS-Fluent v14.5. It was experimentally found that the mean particle velocity in the jet decreases with increasing particulate loading. Moreover, the particle velocity distribution depends on the particle material and shape. It was therefore possible to evaluate the effect of particle loading on exit-nozzle particle speed, and simulate this using Computational Fluid Dynamics (CFD).</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Cold Spray</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Particle velocity</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Feed rate</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">CFD</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">PIV</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Yin, S.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">McDonnell, K.A.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Stier, O.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Lupoi, R.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">Surface and coatings technology</subfield><subfield code="d">Amsterdam [u.a.] : Elsevier Science, 1986</subfield><subfield code="g">304, Seite 237-245</subfield><subfield code="h">Online-Ressource</subfield><subfield code="w">(DE-627)308447522</subfield><subfield code="w">(DE-600)1502240-7</subfield><subfield code="w">(DE-576)098474049</subfield><subfield code="x">0257-8972</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:304</subfield><subfield code="g">pages:237-245</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ELV</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_31</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_32</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_90</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_100</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_150</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_187</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_224</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_702</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2001</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2003</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2004</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2005</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2007</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2009</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2011</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2015</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2025</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2026</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2027</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2031</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2034</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2038</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2039</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2044</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2048</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2049</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2050</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2055</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2056</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2059</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2061</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2064</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2065</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2068</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2070</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2086</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2098</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2106</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2108</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2111</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2113</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2116</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2118</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2119</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2122</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2129</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2143</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2144</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2147</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2148</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2152</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2153</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2188</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2190</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2232</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2336</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2507</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2522</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4035</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4126</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4242</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4251</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4326</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4333</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4334</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4393</subfield></datafield><datafield tag="936" ind1="b" ind2="k"><subfield code="a">52.78</subfield><subfield code="j">Oberflächentechnik</subfield><subfield code="j">Wärmebehandlung</subfield></datafield><datafield tag="936" ind1="b" ind2="k"><subfield code="a">51.20</subfield><subfield code="j">Werkstoffoberflächeneigenschaften</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">304</subfield><subfield code="h">237-245</subfield></datafield></record></collection>
score	7.401067

Nicht das Richtige dabei?

Schreiben Sie uns!

Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions

Nicht das Richtige dabei?

Zugang & Verfügbarkeit

Vorhandene Bände

Nicht das Richtige dabei?