New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz
This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assess...
Ausführliche Beschreibung
Gespeichert in:
| Autor*in: |
Kyovtorov, V. [verfasserIn] |
|---|
| Format: |
E-Artikel |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
2017transfer abstract |
|---|
| Schlagwörter: |
|---|
| Umfang: |
10 |
|---|
| Übergeordnetes Werk: |
Enthalten in: Editorial Board - 2016, München |
|---|---|
| Übergeordnetes Werk: |
volume:73 ; year:2017 ; pages:119-128 ; extent:10 |
| Links: |
|---|
| DOI / URN: |
10.1016/j.aeue.2016.12.017 |
|---|
| Katalog-ID: |
ELV035703229 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | ELV035703229 | ||
| 003 | DE-627 | ||
| 005 | 20230625205247.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 180603s2017 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1016/j.aeue.2016.12.017 |2 doi | |
| 028 | 5 | 2 | |a GBVA2017003000007.pica |
| 035 | |a (DE-627)ELV035703229 | ||
| 035 | |a (ELSEVIER)S1434-8411(16)31564-3 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 082 | 0 | |a 004 |a 620 | |
| 082 | 0 | 4 | |a 004 |q DE-600 |
| 082 | 0 | 4 | |a 620 |q DE-600 |
| 082 | 0 | 4 | |a 610 |q VZ |
| 082 | 0 | 4 | |a 370 |q VZ |
| 100 | 1 | |a Kyovtorov, V. |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz |
| 264 | 1 | |c 2017transfer abstract | |
| 300 | |a 10 | ||
| 336 | |a nicht spezifiziert |b zzz |2 rdacontent | ||
| 337 | |a nicht spezifiziert |b z |2 rdamedia | ||
| 338 | |a nicht spezifiziert |b zu |2 rdacarrier | ||
| 520 | |a This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. | ||
| 520 | |a This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. | ||
| 650 | 7 | |a 3D antenna printing |2 Elsevier | |
| 650 | 7 | |a Antenna design |2 Elsevier | |
| 650 | 7 | |a Polymer metallization |2 Elsevier | |
| 650 | 7 | |a Low weight antenna |2 Elsevier | |
| 650 | 7 | |a Rapid antenna prototyping |2 Elsevier | |
| 650 | 7 | |a 3D printing |2 Elsevier | |
| 700 | 1 | |a Georgiev, I. |4 oth | |
| 700 | 1 | |a Margenov, S. |4 oth | |
| 700 | 1 | |a Stoychev, D. |4 oth | |
| 700 | 1 | |a Oliveri, F. |4 oth | |
| 700 | 1 | |a Tarchi, D. |4 oth | |
| 773 | 0 | 8 | |i Enthalten in |n Elsevier |t Editorial Board |d 2016 |g München |w (DE-627)ELV019902425 |
| 773 | 1 | 8 | |g volume:73 |g year:2017 |g pages:119-128 |g extent:10 |
| 856 | 4 | 0 | |u https://doi.org/10.1016/j.aeue.2016.12.017 |3 Volltext |
| 912 | |a GBV_USEFLAG_U | ||
| 912 | |a GBV_ELV | ||
| 912 | |a SYSFLAG_U | ||
| 951 | |a AR | ||
| 952 | |d 73 |j 2017 |h 119-128 |g 10 | ||
| 953 | |2 045F |a 004 | ||
| author_variant |
v k vk |
|---|---|
| matchkey_str |
kyovtorovvgeorgievimargenovsstoychevdoli:2017----:eatnaeinprahdoyepitnadealztoep |
| hierarchy_sort_str |
2017transfer abstract |
| publishDate |
2017 |
| allfields |
10.1016/j.aeue.2016.12.017 doi GBVA2017003000007.pica (DE-627)ELV035703229 (ELSEVIER)S1434-8411(16)31564-3 DE-627 ger DE-627 rakwb eng 004 620 004 DE-600 620 DE-600 610 VZ 370 VZ Kyovtorov, V. verfasserin aut New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz 2017transfer abstract 10 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing Elsevier Georgiev, I. oth Margenov, S. oth Stoychev, D. oth Oliveri, F. oth Tarchi, D. oth Enthalten in Elsevier Editorial Board 2016 München (DE-627)ELV019902425 volume:73 year:2017 pages:119-128 extent:10 https://doi.org/10.1016/j.aeue.2016.12.017 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U AR 73 2017 119-128 10 045F 004 |
| spelling |
10.1016/j.aeue.2016.12.017 doi GBVA2017003000007.pica (DE-627)ELV035703229 (ELSEVIER)S1434-8411(16)31564-3 DE-627 ger DE-627 rakwb eng 004 620 004 DE-600 620 DE-600 610 VZ 370 VZ Kyovtorov, V. verfasserin aut New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz 2017transfer abstract 10 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing Elsevier Georgiev, I. oth Margenov, S. oth Stoychev, D. oth Oliveri, F. oth Tarchi, D. oth Enthalten in Elsevier Editorial Board 2016 München (DE-627)ELV019902425 volume:73 year:2017 pages:119-128 extent:10 https://doi.org/10.1016/j.aeue.2016.12.017 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U AR 73 2017 119-128 10 045F 004 |
| allfields_unstemmed |
10.1016/j.aeue.2016.12.017 doi GBVA2017003000007.pica (DE-627)ELV035703229 (ELSEVIER)S1434-8411(16)31564-3 DE-627 ger DE-627 rakwb eng 004 620 004 DE-600 620 DE-600 610 VZ 370 VZ Kyovtorov, V. verfasserin aut New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz 2017transfer abstract 10 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing Elsevier Georgiev, I. oth Margenov, S. oth Stoychev, D. oth Oliveri, F. oth Tarchi, D. oth Enthalten in Elsevier Editorial Board 2016 München (DE-627)ELV019902425 volume:73 year:2017 pages:119-128 extent:10 https://doi.org/10.1016/j.aeue.2016.12.017 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U AR 73 2017 119-128 10 045F 004 |
| allfieldsGer |
10.1016/j.aeue.2016.12.017 doi GBVA2017003000007.pica (DE-627)ELV035703229 (ELSEVIER)S1434-8411(16)31564-3 DE-627 ger DE-627 rakwb eng 004 620 004 DE-600 620 DE-600 610 VZ 370 VZ Kyovtorov, V. verfasserin aut New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz 2017transfer abstract 10 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing Elsevier Georgiev, I. oth Margenov, S. oth Stoychev, D. oth Oliveri, F. oth Tarchi, D. oth Enthalten in Elsevier Editorial Board 2016 München (DE-627)ELV019902425 volume:73 year:2017 pages:119-128 extent:10 https://doi.org/10.1016/j.aeue.2016.12.017 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U AR 73 2017 119-128 10 045F 004 |
| allfieldsSound |
10.1016/j.aeue.2016.12.017 doi GBVA2017003000007.pica (DE-627)ELV035703229 (ELSEVIER)S1434-8411(16)31564-3 DE-627 ger DE-627 rakwb eng 004 620 004 DE-600 620 DE-600 610 VZ 370 VZ Kyovtorov, V. verfasserin aut New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz 2017transfer abstract 10 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing Elsevier Georgiev, I. oth Margenov, S. oth Stoychev, D. oth Oliveri, F. oth Tarchi, D. oth Enthalten in Elsevier Editorial Board 2016 München (DE-627)ELV019902425 volume:73 year:2017 pages:119-128 extent:10 https://doi.org/10.1016/j.aeue.2016.12.017 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U AR 73 2017 119-128 10 045F 004 |
| language |
English |
| source |
Enthalten in Editorial Board München volume:73 year:2017 pages:119-128 extent:10 |
| sourceStr |
Enthalten in Editorial Board München volume:73 year:2017 pages:119-128 extent:10 |
| format_phy_str_mv |
Article |
| institution |
findex.gbv.de |
| topic_facet |
3D antenna printing Antenna design Polymer metallization Low weight antenna Rapid antenna prototyping 3D printing |
| dewey-raw |
004 |
| isfreeaccess_bool |
false |
| container_title |
Editorial Board |
| authorswithroles_txt_mv |
Kyovtorov, V. @@aut@@ Georgiev, I. @@oth@@ Margenov, S. @@oth@@ Stoychev, D. @@oth@@ Oliveri, F. @@oth@@ Tarchi, D. @@oth@@ |
| publishDateDaySort_date |
2017-01-01T00:00:00Z |
| hierarchy_top_id |
ELV019902425 |
| dewey-sort |
14 |
| id |
ELV035703229 |
| language_de |
englisch |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">ELV035703229</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230625205247.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">180603s2017 xx |||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1016/j.aeue.2016.12.017</subfield><subfield code="2">doi</subfield></datafield><datafield tag="028" ind1="5" ind2="2"><subfield code="a">GBVA2017003000007.pica</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)ELV035703229</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ELSEVIER)S1434-8411(16)31564-3</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">004</subfield><subfield code="a">620</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">004</subfield><subfield code="q">DE-600</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">620</subfield><subfield code="q">DE-600</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">610</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">370</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Kyovtorov, V.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2017transfer abstract</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">10</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">z</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zu</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz.</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">3D antenna printing</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Antenna design</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Polymer metallization</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Low weight antenna</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Rapid antenna prototyping</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">3D printing</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Georgiev, I.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Margenov, S.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Stoychev, D.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Oliveri, F.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Tarchi, D.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="n">Elsevier</subfield><subfield code="t">Editorial Board</subfield><subfield code="d">2016</subfield><subfield code="g">München</subfield><subfield code="w">(DE-627)ELV019902425</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:73</subfield><subfield code="g">year:2017</subfield><subfield code="g">pages:119-128</subfield><subfield code="g">extent:10</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.1016/j.aeue.2016.12.017</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ELV</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_U</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">73</subfield><subfield code="j">2017</subfield><subfield code="h">119-128</subfield><subfield code="g">10</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">004</subfield></datafield></record></collection>
|
| author |
Kyovtorov, V. |
| spellingShingle |
Kyovtorov, V. ddc 004 ddc 620 ddc 610 ddc 370 Elsevier 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz |
| authorStr |
Kyovtorov, V. |
| ppnlink_with_tag_str_mv |
@@773@@(DE-627)ELV019902425 |
| format |
electronic Article |
| dewey-ones |
004 - Data processing & computer science 620 - Engineering & allied operations 610 - Medicine & health 370 - Education |
| delete_txt_mv |
keep |
| author_role |
aut |
| collection |
elsevier |
| remote_str |
true |
| illustrated |
Not Illustrated |
| topic_title |
004 620 004 DE-600 620 DE-600 610 VZ 370 VZ New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing Elsevier |
| topic |
ddc 004 ddc 620 ddc 610 ddc 370 Elsevier 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing |
| topic_unstemmed |
ddc 004 ddc 620 ddc 610 ddc 370 Elsevier 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing |
| topic_browse |
ddc 004 ddc 620 ddc 610 ddc 370 Elsevier 3D antenna printing Elsevier Antenna design Elsevier Polymer metallization Elsevier Low weight antenna Elsevier Rapid antenna prototyping Elsevier 3D printing |
| format_facet |
Elektronische Aufsätze Aufsätze Elektronische Ressource |
| format_main_str_mv |
Text Zeitschrift/Artikel |
| carriertype_str_mv |
zu |
| author2_variant |
i g ig s m sm d s ds f o fo d t dt |
| hierarchy_parent_title |
Editorial Board |
| hierarchy_parent_id |
ELV019902425 |
| dewey-tens |
000 - Computer science, knowledge & systems 620 - Engineering 610 - Medicine & health 370 - Education |
| hierarchy_top_title |
Editorial Board |
| isfreeaccess_txt |
false |
| familylinks_str_mv |
(DE-627)ELV019902425 |
| title |
New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz |
| ctrlnum |
(DE-627)ELV035703229 (ELSEVIER)S1434-8411(16)31564-3 |
| title_full |
New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz |
| author_sort |
Kyovtorov, V. |
| journal |
Editorial Board |
| journalStr |
Editorial Board |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
000 - Computer science, information & general works 600 - Technology 300 - Social sciences |
| recordtype |
marc |
| publishDateSort |
2017 |
| contenttype_str_mv |
zzz |
| container_start_page |
119 |
| author_browse |
Kyovtorov, V. |
| container_volume |
73 |
| physical |
10 |
| class |
004 620 004 DE-600 620 DE-600 610 VZ 370 VZ |
| format_se |
Elektronische Aufsätze |
| author-letter |
Kyovtorov, V. |
| doi_str_mv |
10.1016/j.aeue.2016.12.017 |
| dewey-full |
004 620 610 370 |
| title_sort |
new antenna design approach – 3d polymer printing and metallization. experimental test at 14–18ghz |
| title_auth |
New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz |
| abstract |
This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. |
| abstractGer |
This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. |
| abstract_unstemmed |
This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz. |
| collection_details |
GBV_USEFLAG_U GBV_ELV SYSFLAG_U |
| title_short |
New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz |
| url |
https://doi.org/10.1016/j.aeue.2016.12.017 |
| remote_bool |
true |
| author2 |
Georgiev, I. Margenov, S. Stoychev, D. Oliveri, F. Tarchi, D. |
| author2Str |
Georgiev, I. Margenov, S. Stoychev, D. Oliveri, F. Tarchi, D. |
| ppnlink |
ELV019902425 |
| mediatype_str_mv |
z |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| author2_role |
oth oth oth oth oth |
| doi_str |
10.1016/j.aeue.2016.12.017 |
| up_date |
2024-07-06T18:15:20.195Z |
| _version_ |
1803854513645289472 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">ELV035703229</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230625205247.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">180603s2017 xx |||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1016/j.aeue.2016.12.017</subfield><subfield code="2">doi</subfield></datafield><datafield tag="028" ind1="5" ind2="2"><subfield code="a">GBVA2017003000007.pica</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)ELV035703229</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ELSEVIER)S1434-8411(16)31564-3</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2=" "><subfield code="a">004</subfield><subfield code="a">620</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">004</subfield><subfield code="q">DE-600</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">620</subfield><subfield code="q">DE-600</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">610</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">370</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Kyovtorov, V.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18GHz</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2017transfer abstract</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">10</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">z</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zu</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz.</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18GHz.</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">3D antenna printing</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Antenna design</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Polymer metallization</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Low weight antenna</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Rapid antenna prototyping</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">3D printing</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Georgiev, I.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Margenov, S.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Stoychev, D.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Oliveri, F.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Tarchi, D.</subfield><subfield code="4">oth</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="n">Elsevier</subfield><subfield code="t">Editorial Board</subfield><subfield code="d">2016</subfield><subfield code="g">München</subfield><subfield code="w">(DE-627)ELV019902425</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:73</subfield><subfield code="g">year:2017</subfield><subfield code="g">pages:119-128</subfield><subfield code="g">extent:10</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.1016/j.aeue.2016.12.017</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ELV</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_U</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">73</subfield><subfield code="j">2017</subfield><subfield code="h">119-128</subfield><subfield code="g">10</subfield></datafield><datafield tag="953" ind1=" " ind2=" "><subfield code="2">045F</subfield><subfield code="a">004</subfield></datafield></record></collection>
|
| score |
7.40149 |