Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting
• Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM p...
Ausführliche Beschreibung
Gespeichert in:
| Autor*in: |
Bambach, Markus [verfasserIn] |
|---|
| Format: |
E-Artikel |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
2019 |
|---|
| Schlagwörter: |
|---|
| Umfang: |
9 |
|---|
| Übergeordnetes Werk: |
Enthalten in: Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota - Bayulgen, Oksan ELSEVIER, 2021, Dearborn, Mich |
|---|---|
| Übergeordnetes Werk: |
volume:37 ; year:2019 ; pages:150-158 ; extent:9 |
| Links: |
|---|
| DOI / URN: |
10.1016/j.jmapro.2018.11.011 |
|---|
| Katalog-ID: |
ELV046189327 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | ELV046189327 | ||
| 003 | DE-627 | ||
| 005 | 20230624122050.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 191021s2019 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1016/j.jmapro.2018.11.011 |2 doi | |
| 028 | 5 | 2 | |a GBV00000000000559.pica |
| 035 | |a (DE-627)ELV046189327 | ||
| 035 | |a (ELSEVIER)S1526-6125(18)30597-8 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 082 | 0 | 4 | |a 620 |q VZ |
| 084 | |a 83.65 |2 bkl | ||
| 100 | 1 | |a Bambach, Markus |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting |
| 264 | 1 | |c 2019 | |
| 300 | |a 9 | ||
| 336 | |a nicht spezifiziert |b zzz |2 rdacontent | ||
| 337 | |a nicht spezifiziert |b z |2 rdamedia | ||
| 338 | |a nicht spezifiziert |b zu |2 rdacarrier | ||
| 520 | |a • Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced | ||
| 650 | 7 | |a microstructure |2 Elsevier | |
| 650 | 7 | |a hot forging |2 Elsevier | |
| 650 | 7 | |a Additive manufacturing |2 Elsevier | |
| 650 | 7 | |a hot working behavior |2 Elsevier | |
| 700 | 1 | |a Sizova, Irina |4 oth | |
| 700 | 1 | |a Emdadi, Aliakbar |4 oth | |
| 773 | 0 | 8 | |i Enthalten in |n Soc |a Bayulgen, Oksan ELSEVIER |t Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota |d 2021 |g Dearborn, Mich |w (DE-627)ELV00685088X |
| 773 | 1 | 8 | |g volume:37 |g year:2019 |g pages:150-158 |g extent:9 |
| 856 | 4 | 0 | |u https://doi.org/10.1016/j.jmapro.2018.11.011 |3 Volltext |
| 912 | |a GBV_USEFLAG_U | ||
| 912 | |a GBV_ELV | ||
| 912 | |a SYSFLAG_U | ||
| 936 | b | k | |a 83.65 |j Versorgungswirtschaft |q VZ |
| 951 | |a AR | ||
| 952 | |d 37 |j 2019 |h 150-158 |g 9 | ||
| author_variant |
m b mb |
|---|---|
| matchkey_str |
bambachmarkussizovairinaemdadialiakbar:2019----:eeomnoarcsigotfria4frigbsdnrfrsae |
| hierarchy_sort_str |
2019 |
| bklnumber |
83.65 |
| publishDate |
2019 |
| allfields |
10.1016/j.jmapro.2018.11.011 doi GBV00000000000559.pica (DE-627)ELV046189327 (ELSEVIER)S1526-6125(18)30597-8 DE-627 ger DE-627 rakwb eng 620 VZ 83.65 bkl Bambach, Markus verfasserin aut Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting 2019 9 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier • Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior Elsevier Sizova, Irina oth Emdadi, Aliakbar oth Enthalten in Soc Bayulgen, Oksan ELSEVIER Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota 2021 Dearborn, Mich (DE-627)ELV00685088X volume:37 year:2019 pages:150-158 extent:9 https://doi.org/10.1016/j.jmapro.2018.11.011 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U 83.65 Versorgungswirtschaft VZ AR 37 2019 150-158 9 |
| spelling |
10.1016/j.jmapro.2018.11.011 doi GBV00000000000559.pica (DE-627)ELV046189327 (ELSEVIER)S1526-6125(18)30597-8 DE-627 ger DE-627 rakwb eng 620 VZ 83.65 bkl Bambach, Markus verfasserin aut Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting 2019 9 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier • Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior Elsevier Sizova, Irina oth Emdadi, Aliakbar oth Enthalten in Soc Bayulgen, Oksan ELSEVIER Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota 2021 Dearborn, Mich (DE-627)ELV00685088X volume:37 year:2019 pages:150-158 extent:9 https://doi.org/10.1016/j.jmapro.2018.11.011 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U 83.65 Versorgungswirtschaft VZ AR 37 2019 150-158 9 |
| allfields_unstemmed |
10.1016/j.jmapro.2018.11.011 doi GBV00000000000559.pica (DE-627)ELV046189327 (ELSEVIER)S1526-6125(18)30597-8 DE-627 ger DE-627 rakwb eng 620 VZ 83.65 bkl Bambach, Markus verfasserin aut Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting 2019 9 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier • Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior Elsevier Sizova, Irina oth Emdadi, Aliakbar oth Enthalten in Soc Bayulgen, Oksan ELSEVIER Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota 2021 Dearborn, Mich (DE-627)ELV00685088X volume:37 year:2019 pages:150-158 extent:9 https://doi.org/10.1016/j.jmapro.2018.11.011 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U 83.65 Versorgungswirtschaft VZ AR 37 2019 150-158 9 |
| allfieldsGer |
10.1016/j.jmapro.2018.11.011 doi GBV00000000000559.pica (DE-627)ELV046189327 (ELSEVIER)S1526-6125(18)30597-8 DE-627 ger DE-627 rakwb eng 620 VZ 83.65 bkl Bambach, Markus verfasserin aut Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting 2019 9 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier • Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior Elsevier Sizova, Irina oth Emdadi, Aliakbar oth Enthalten in Soc Bayulgen, Oksan ELSEVIER Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota 2021 Dearborn, Mich (DE-627)ELV00685088X volume:37 year:2019 pages:150-158 extent:9 https://doi.org/10.1016/j.jmapro.2018.11.011 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U 83.65 Versorgungswirtschaft VZ AR 37 2019 150-158 9 |
| allfieldsSound |
10.1016/j.jmapro.2018.11.011 doi GBV00000000000559.pica (DE-627)ELV046189327 (ELSEVIER)S1526-6125(18)30597-8 DE-627 ger DE-627 rakwb eng 620 VZ 83.65 bkl Bambach, Markus verfasserin aut Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting 2019 9 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier • Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior Elsevier Sizova, Irina oth Emdadi, Aliakbar oth Enthalten in Soc Bayulgen, Oksan ELSEVIER Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota 2021 Dearborn, Mich (DE-627)ELV00685088X volume:37 year:2019 pages:150-158 extent:9 https://doi.org/10.1016/j.jmapro.2018.11.011 Volltext GBV_USEFLAG_U GBV_ELV SYSFLAG_U 83.65 Versorgungswirtschaft VZ AR 37 2019 150-158 9 |
| language |
English |
| source |
Enthalten in Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota Dearborn, Mich volume:37 year:2019 pages:150-158 extent:9 |
| sourceStr |
Enthalten in Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota Dearborn, Mich volume:37 year:2019 pages:150-158 extent:9 |
| format_phy_str_mv |
Article |
| bklname |
Versorgungswirtschaft |
| institution |
findex.gbv.de |
| topic_facet |
microstructure hot forging Additive manufacturing hot working behavior |
| dewey-raw |
620 |
| isfreeaccess_bool |
false |
| container_title |
Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota |
| authorswithroles_txt_mv |
Bambach, Markus @@aut@@ Sizova, Irina @@oth@@ Emdadi, Aliakbar @@oth@@ |
| publishDateDaySort_date |
2019-01-01T00:00:00Z |
| hierarchy_top_id |
ELV00685088X |
| dewey-sort |
3620 |
| id |
ELV046189327 |
| language_de |
englisch |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">ELV046189327</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230624122050.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">191021s2019 xx |||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1016/j.jmapro.2018.11.011</subfield><subfield code="2">doi</subfield></datafield><datafield tag="028" ind1="5" ind2="2"><subfield code="a">GBV00000000000559.pica</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)ELV046189327</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ELSEVIER)S1526-6125(18)30597-8</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">620</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">83.65</subfield><subfield code="2">bkl</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Bambach, Markus</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2019</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">9</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">z</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zu</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">• Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">microstructure</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">hot forging</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Additive manufacturing</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">hot working behavior</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Sizova, Irina</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Emdadi, Aliakbar</subfield><subfield code="4">oth</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="n">Soc</subfield><subfield code="a">Bayulgen, Oksan ELSEVIER</subfield><subfield code="t">Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota</subfield><subfield code="d">2021</subfield><subfield code="g">Dearborn, Mich</subfield><subfield code="w">(DE-627)ELV00685088X</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:37</subfield><subfield code="g">year:2019</subfield><subfield code="g">pages:150-158</subfield><subfield code="g">extent:9</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.1016/j.jmapro.2018.11.011</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ELV</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_U</subfield></datafield><datafield tag="936" ind1="b" ind2="k"><subfield code="a">83.65</subfield><subfield code="j">Versorgungswirtschaft</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">37</subfield><subfield code="j">2019</subfield><subfield code="h">150-158</subfield><subfield code="g">9</subfield></datafield></record></collection>
|
| author |
Bambach, Markus |
| spellingShingle |
Bambach, Markus ddc 620 bkl 83.65 Elsevier microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting |
| authorStr |
Bambach, Markus |
| ppnlink_with_tag_str_mv |
@@773@@(DE-627)ELV00685088X |
| format |
electronic Article |
| dewey-ones |
620 - Engineering & allied operations |
| delete_txt_mv |
keep |
| author_role |
aut |
| collection |
elsevier |
| remote_str |
true |
| illustrated |
Not Illustrated |
| topic_title |
620 VZ 83.65 bkl Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior Elsevier |
| topic |
ddc 620 bkl 83.65 Elsevier microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior |
| topic_unstemmed |
ddc 620 bkl 83.65 Elsevier microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior |
| topic_browse |
ddc 620 bkl 83.65 Elsevier microstructure Elsevier hot forging Elsevier Additive manufacturing Elsevier hot working behavior |
| format_facet |
Elektronische Aufsätze Aufsätze Elektronische Ressource |
| format_main_str_mv |
Text Zeitschrift/Artikel |
| carriertype_str_mv |
zu |
| author2_variant |
i s is a e ae |
| hierarchy_parent_title |
Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota |
| hierarchy_parent_id |
ELV00685088X |
| dewey-tens |
620 - Engineering |
| hierarchy_top_title |
Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota |
| isfreeaccess_txt |
false |
| familylinks_str_mv |
(DE-627)ELV00685088X |
| title |
Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting |
| ctrlnum |
(DE-627)ELV046189327 (ELSEVIER)S1526-6125(18)30597-8 |
| title_full |
Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting |
| author_sort |
Bambach, Markus |
| journal |
Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota |
| journalStr |
Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology |
| recordtype |
marc |
| publishDateSort |
2019 |
| contenttype_str_mv |
zzz |
| container_start_page |
150 |
| author_browse |
Bambach, Markus |
| container_volume |
37 |
| physical |
9 |
| class |
620 VZ 83.65 bkl |
| format_se |
Elektronische Aufsätze |
| author-letter |
Bambach, Markus |
| doi_str_mv |
10.1016/j.jmapro.2018.11.011 |
| dewey-full |
620 |
| title_sort |
development of a processing route for ti-6al-4v forgings based on preforms made by selective laser melting |
| title_auth |
Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting |
| abstract |
• Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced |
| abstractGer |
• Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced |
| abstract_unstemmed |
• Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced |
| collection_details |
GBV_USEFLAG_U GBV_ELV SYSFLAG_U |
| title_short |
Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting |
| url |
https://doi.org/10.1016/j.jmapro.2018.11.011 |
| remote_bool |
true |
| author2 |
Sizova, Irina Emdadi, Aliakbar |
| author2Str |
Sizova, Irina Emdadi, Aliakbar |
| ppnlink |
ELV00685088X |
| mediatype_str_mv |
z |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| author2_role |
oth oth |
| doi_str |
10.1016/j.jmapro.2018.11.011 |
| up_date |
2024-07-06T19:33:55.390Z |
| _version_ |
1803859457882456064 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">ELV046189327</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230624122050.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">191021s2019 xx |||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1016/j.jmapro.2018.11.011</subfield><subfield code="2">doi</subfield></datafield><datafield tag="028" ind1="5" ind2="2"><subfield code="a">GBV00000000000559.pica</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)ELV046189327</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(ELSEVIER)S1526-6125(18)30597-8</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">620</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">83.65</subfield><subfield code="2">bkl</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Bambach, Markus</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2019</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">9</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">z</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zu</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">• Selective Laser Melting can be used to produce Ti-6Al-4 V pre-forms for hot forming • The number of forging steps could be reduced during novel processing chain • SLM samples show lower flow stresses and the higher rate of dynamic globularization • Hot compression reduces the porosity of the SLM pre-forms • Appling the final heat treatment the desired microstructures can be produced</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">microstructure</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">hot forging</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">Additive manufacturing</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="650" ind1=" " ind2="7"><subfield code="a">hot working behavior</subfield><subfield code="2">Elsevier</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Sizova, Irina</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Emdadi, Aliakbar</subfield><subfield code="4">oth</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="n">Soc</subfield><subfield code="a">Bayulgen, Oksan ELSEVIER</subfield><subfield code="t">Tilting at windmills? Electoral repercussions of wind turbine projects in Minnesota</subfield><subfield code="d">2021</subfield><subfield code="g">Dearborn, Mich</subfield><subfield code="w">(DE-627)ELV00685088X</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:37</subfield><subfield code="g">year:2019</subfield><subfield code="g">pages:150-158</subfield><subfield code="g">extent:9</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://doi.org/10.1016/j.jmapro.2018.11.011</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ELV</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_U</subfield></datafield><datafield tag="936" ind1="b" ind2="k"><subfield code="a">83.65</subfield><subfield code="j">Versorgungswirtschaft</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">37</subfield><subfield code="j">2019</subfield><subfield code="h">150-158</subfield><subfield code="g">9</subfield></datafield></record></collection>
|
| score |
7.4020405 |