Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis
Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GF...
Ausführliche Beschreibung
Gespeichert in:
| Autor*in: |
|---|
| Format: |
E-Artikel |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
2004 |
|---|
| Schlagwörter: |
|---|
| Umfang: |
5 |
|---|
| Reproduktion: |
Emerald Fulltext Archive Database 1994-2005 |
|---|---|
| Übergeordnetes Werk: |
In: Industrial lubrication & tribology - Bradford : MCB Univ. Press, 1967, 56(2004), 5, Seite 270-274 |
| Übergeordnetes Werk: |
volume:56 ; year:2004 ; number:5 ; pages:270-274 ; extent:5 |
| Links: |
|---|
| DOI / URN: |
10.1108/00368790410550679 |
|---|
| Katalog-ID: |
NLEJ219641706 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLEJ219641706 | ||
| 003 | DE-627 | ||
| 005 | 20210707091002.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 090811s2004 xxk|||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1108/00368790410550679 |2 doi | |
| 035 | |a (DE-627)NLEJ219641706 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 044 | |c XA-GB | ||
| 245 | 1 | 0 | |a Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis |
| 264 | 1 | |c 2004 | |
| 300 | |a 5 | ||
| 336 | |a nicht spezifiziert |b zzz |2 rdacontent | ||
| 337 | |a nicht spezifiziert |b z |2 rdamedia | ||
| 338 | |a nicht spezifiziert |b zu |2 rdacarrier | ||
| 520 | |a Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. | ||
| 533 | |f Emerald Fulltext Archive Database 1994-2005 | ||
| 650 | 4 | |a Analysis of variance | |
| 650 | 4 | |a Plastics | |
| 650 | 4 | |a Surface texture | |
| 700 | 1 | |a Davim, J. Paulo |4 oth | |
| 700 | 1 | |a Mata, Francisco |4 oth | |
| 773 | 0 | 8 | |i In |t Industrial lubrication & tribology |d Bradford : MCB Univ. Press, 1967 |g 56(2004), 5, Seite 270-274 |h Online-Ressource |w (DE-627)NLEJ219579458 |w (DE-600)2025330-8 |7 nnns |
| 773 | 1 | 8 | |g volume:56 |g year:2004 |g number:5 |g pages:270-274 |g extent:5 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.1108/00368790410550679 |
| 912 | |a GBV_USEFLAG_U | ||
| 912 | |a ZDB-1-EFD | ||
| 912 | |a GBV_NL_ARTICLE | ||
| 951 | |a AR | ||
| 952 | |d 56 |j 2004 |e 5 |h 270-274 |g 5 | ||
| matchkey_str |
davimjpaulomatafrancisco:2004----:nlecoctigaaeesnufcruhesnunngasirrifrepa |
|---|---|
| hierarchy_sort_str |
2004 |
| publishDate |
2004 |
| allfields |
10.1108/00368790410550679 doi (DE-627)NLEJ219641706 DE-627 ger DE-627 rakwb eng XA-GB Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis 2004 5 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. Emerald Fulltext Archive Database 1994-2005 Analysis of variance Plastics Surface texture Davim, J. Paulo oth Mata, Francisco oth In Industrial lubrication & tribology Bradford : MCB Univ. Press, 1967 56(2004), 5, Seite 270-274 Online-Ressource (DE-627)NLEJ219579458 (DE-600)2025330-8 nnns volume:56 year:2004 number:5 pages:270-274 extent:5 http://dx.doi.org/10.1108/00368790410550679 GBV_USEFLAG_U ZDB-1-EFD GBV_NL_ARTICLE AR 56 2004 5 270-274 5 |
| spelling |
10.1108/00368790410550679 doi (DE-627)NLEJ219641706 DE-627 ger DE-627 rakwb eng XA-GB Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis 2004 5 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. Emerald Fulltext Archive Database 1994-2005 Analysis of variance Plastics Surface texture Davim, J. Paulo oth Mata, Francisco oth In Industrial lubrication & tribology Bradford : MCB Univ. Press, 1967 56(2004), 5, Seite 270-274 Online-Ressource (DE-627)NLEJ219579458 (DE-600)2025330-8 nnns volume:56 year:2004 number:5 pages:270-274 extent:5 http://dx.doi.org/10.1108/00368790410550679 GBV_USEFLAG_U ZDB-1-EFD GBV_NL_ARTICLE AR 56 2004 5 270-274 5 |
| allfields_unstemmed |
10.1108/00368790410550679 doi (DE-627)NLEJ219641706 DE-627 ger DE-627 rakwb eng XA-GB Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis 2004 5 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. Emerald Fulltext Archive Database 1994-2005 Analysis of variance Plastics Surface texture Davim, J. Paulo oth Mata, Francisco oth In Industrial lubrication & tribology Bradford : MCB Univ. Press, 1967 56(2004), 5, Seite 270-274 Online-Ressource (DE-627)NLEJ219579458 (DE-600)2025330-8 nnns volume:56 year:2004 number:5 pages:270-274 extent:5 http://dx.doi.org/10.1108/00368790410550679 GBV_USEFLAG_U ZDB-1-EFD GBV_NL_ARTICLE AR 56 2004 5 270-274 5 |
| allfieldsGer |
10.1108/00368790410550679 doi (DE-627)NLEJ219641706 DE-627 ger DE-627 rakwb eng XA-GB Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis 2004 5 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. Emerald Fulltext Archive Database 1994-2005 Analysis of variance Plastics Surface texture Davim, J. Paulo oth Mata, Francisco oth In Industrial lubrication & tribology Bradford : MCB Univ. Press, 1967 56(2004), 5, Seite 270-274 Online-Ressource (DE-627)NLEJ219579458 (DE-600)2025330-8 nnns volume:56 year:2004 number:5 pages:270-274 extent:5 http://dx.doi.org/10.1108/00368790410550679 GBV_USEFLAG_U ZDB-1-EFD GBV_NL_ARTICLE AR 56 2004 5 270-274 5 |
| allfieldsSound |
10.1108/00368790410550679 doi (DE-627)NLEJ219641706 DE-627 ger DE-627 rakwb eng XA-GB Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis 2004 5 nicht spezifiziert zzz rdacontent nicht spezifiziert z rdamedia nicht spezifiziert zu rdacarrier Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. Emerald Fulltext Archive Database 1994-2005 Analysis of variance Plastics Surface texture Davim, J. Paulo oth Mata, Francisco oth In Industrial lubrication & tribology Bradford : MCB Univ. Press, 1967 56(2004), 5, Seite 270-274 Online-Ressource (DE-627)NLEJ219579458 (DE-600)2025330-8 nnns volume:56 year:2004 number:5 pages:270-274 extent:5 http://dx.doi.org/10.1108/00368790410550679 GBV_USEFLAG_U ZDB-1-EFD GBV_NL_ARTICLE AR 56 2004 5 270-274 5 |
| language |
English |
| source |
In Industrial lubrication & tribology 56(2004), 5, Seite 270-274 volume:56 year:2004 number:5 pages:270-274 extent:5 |
| sourceStr |
In Industrial lubrication & tribology 56(2004), 5, Seite 270-274 volume:56 year:2004 number:5 pages:270-274 extent:5 |
| format_phy_str_mv |
Article |
| institution |
findex.gbv.de |
| topic_facet |
Analysis of variance Plastics Surface texture |
| isfreeaccess_bool |
false |
| container_title |
Industrial lubrication & tribology |
| authorswithroles_txt_mv |
Davim, J. Paulo @@oth@@ Mata, Francisco @@oth@@ |
| publishDateDaySort_date |
2004-01-01T00:00:00Z |
| hierarchy_top_id |
NLEJ219579458 |
| id |
NLEJ219641706 |
| language_de |
englisch |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">NLEJ219641706</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20210707091002.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">090811s2004 xxk|||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1108/00368790410550679</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)NLEJ219641706</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="044" ind1=" " ind2=" "><subfield code="c">XA-GB</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2004</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">5</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">z</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zu</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece.</subfield></datafield><datafield tag="533" ind1=" " ind2=" "><subfield code="f">Emerald Fulltext Archive Database 1994-2005</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Analysis of variance</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Plastics</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Surface texture</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Davim, J. Paulo</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Mata, Francisco</subfield><subfield code="4">oth</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">Industrial lubrication & tribology</subfield><subfield code="d">Bradford : MCB Univ. Press, 1967</subfield><subfield code="g">56(2004), 5, Seite 270-274</subfield><subfield code="h">Online-Ressource</subfield><subfield code="w">(DE-627)NLEJ219579458</subfield><subfield code="w">(DE-600)2025330-8</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:56</subfield><subfield code="g">year:2004</subfield><subfield code="g">number:5</subfield><subfield code="g">pages:270-274</subfield><subfield code="g">extent:5</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">http://dx.doi.org/10.1108/00368790410550679</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-1-EFD</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_NL_ARTICLE</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">56</subfield><subfield code="j">2004</subfield><subfield code="e">5</subfield><subfield code="h">270-274</subfield><subfield code="g">5</subfield></datafield></record></collection>
|
| series2 |
Emerald Fulltext Archive Database 1994-2005 |
| ppnlink_with_tag_str_mv |
@@773@@(DE-627)NLEJ219579458 |
| format |
electronic Article |
| delete_txt_mv |
keep |
| collection |
NL |
| remote_str |
true |
| illustrated |
Not Illustrated |
| topic_title |
Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis Analysis of variance Plastics Surface texture |
| topic |
misc Analysis of variance misc Plastics misc Surface texture |
| spellingShingle |
misc Analysis of variance misc Plastics misc Surface texture Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis |
| topic_unstemmed |
misc Analysis of variance misc Plastics misc Surface texture |
| topic_browse |
misc Analysis of variance misc Plastics misc Surface texture |
| format_facet |
Elektronische Aufsätze Aufsätze Elektronische Ressource |
| format_main_str_mv |
Text Zeitschrift/Artikel |
| carriertype_str_mv |
zu |
| author2_variant |
j p d jp jpd f m fm |
| hierarchy_parent_title |
Industrial lubrication & tribology |
| hierarchy_parent_id |
NLEJ219579458 |
| hierarchy_top_title |
Industrial lubrication & tribology |
| isfreeaccess_txt |
false |
| familylinks_str_mv |
(DE-627)NLEJ219579458 (DE-600)2025330-8 |
| title |
Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis |
| ctrlnum |
(DE-627)NLEJ219641706 |
| title_full |
Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis |
| journal |
Industrial lubrication & tribology |
| journalStr |
Industrial lubrication & tribology |
| lang_code |
eng |
| isOA_bool |
false |
| recordtype |
marc |
| publishDateSort |
2004 |
| contenttype_str_mv |
zzz |
| container_start_page |
270 |
| container_volume |
56 |
| physical |
5 |
| format_se |
Elektronische Aufsätze |
| countryofpublication_str_mv |
XA-GB |
| doi_str_mv |
10.1108/00368790410550679 |
| title_sort |
influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis |
| title_auth |
Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis |
| abstract |
Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. |
| abstractGer |
Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. |
| abstract_unstemmed |
Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece. |
| collection_details |
GBV_USEFLAG_U ZDB-1-EFD GBV_NL_ARTICLE |
| container_issue |
5 |
| title_short |
Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis |
| url |
http://dx.doi.org/10.1108/00368790410550679 |
| remote_bool |
true |
| author2 |
Davim, J. Paulo Mata, Francisco |
| author2Str |
Davim, J. Paulo Mata, Francisco |
| ppnlink |
NLEJ219579458 |
| mediatype_str_mv |
z |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| author2_role |
oth oth |
| doi_str |
10.1108/00368790410550679 |
| up_date |
2024-07-06T05:43:37.593Z |
| _version_ |
1803807220136148992 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">NLEJ219641706</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20210707091002.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">090811s2004 xxk|||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1108/00368790410550679</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)NLEJ219641706</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="044" ind1=" " ind2=" "><subfield code="c">XA-GB</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2004</subfield></datafield><datafield tag="300" ind1=" " ind2=" "><subfield code="a">5</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zzz</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">z</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">nicht spezifiziert</subfield><subfield code="b">zu</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Surface roughness, normally defined by the Ra and Rt/Rmax parameters, is an important topic in the manufacturing engineering, for controlling produced components. This paper presents a study of the influence of cutting parameters on surface roughness in turning of glass-fibre-reinforced plastics (GFRPs). A plan of experiments was performed on controlled machining with cutting parameters prefixed in workpiece. A statistical technique, using orthogonal arrays and analysis of variance, has been employed to investigate the influence of cutting parameters on surface roughness in turning GFRPs tubes using polycrystalline diamond cutting tools. The objective was to obtain the contribution percentages of the cutting parameters (cutting velocity and feed rate) on the surface roughness in GFRPs workpiece.</subfield></datafield><datafield tag="533" ind1=" " ind2=" "><subfield code="f">Emerald Fulltext Archive Database 1994-2005</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Analysis of variance</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Plastics</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Surface texture</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Davim, J. Paulo</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Mata, Francisco</subfield><subfield code="4">oth</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">In</subfield><subfield code="t">Industrial lubrication & tribology</subfield><subfield code="d">Bradford : MCB Univ. Press, 1967</subfield><subfield code="g">56(2004), 5, Seite 270-274</subfield><subfield code="h">Online-Ressource</subfield><subfield code="w">(DE-627)NLEJ219579458</subfield><subfield code="w">(DE-600)2025330-8</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:56</subfield><subfield code="g">year:2004</subfield><subfield code="g">number:5</subfield><subfield code="g">pages:270-274</subfield><subfield code="g">extent:5</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">http://dx.doi.org/10.1108/00368790410550679</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_U</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">ZDB-1-EFD</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_NL_ARTICLE</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">56</subfield><subfield code="j">2004</subfield><subfield code="e">5</subfield><subfield code="h">270-274</subfield><subfield code="g">5</subfield></datafield></record></collection>
|
| score |
7.401374 |