Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications

There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here. Ausführliche Beschreibung

Gespeichert in:

Autor*in:	Cohen, Isaac Jacob [verfasserIn] Wetz, David Alan Heinzel, John M Qing Dong

Format:	Artikel
Sprache:	Englisch

Erschienen:	2015

Schlagwörter:	high-rate directed energy transient loads ac bus power quality electrochemical energy storage devices actively controlled hybrid energy storage module power electronics Generators commercial off-the-shelf power electronic converters Power supplies Batteries high-energy batteries LIBs battery life cycle high-power electric double layer capacitors supercapacitors compact prime power supply Inverters high-power density power supply quality lithium-ion batteries lithium fossil fuel generator Energy storage actively controlled power electronics directed energy weapons power convertors secondary cells EDLCs high-energy reservoir electrical grid backup lithium batteries Capacitors HESM high-energy density Electrical currents Energy efficiency Electrical design Hybridization Power supply

Übergeordnetes Werk:	Enthalten in: IEEE transactions on plasma science - New York, NY : IEEE, 1973, 43(2015), 5, Seite 1427-1433
Übergeordnetes Werk:	volume:43 ; year:2015 ; number:5 ; pages:1427-1433

Links:	Volltext Link aufrufen Link aufrufen

DOI / URN:	10.1109/TPS.2014.2370053

Katalog-ID:	OLC1966513712

Internformat


LEADER	01000caa a2200265 4500
001	OLC1966513712
003	DE-627
005	20220221143459.0
007	tu
008	160206s2015 xx \|\|\|\|\| 00\| \|\|eng c
024	7		\|a 10.1109/TPS.2014.2370053 \|2 doi
028	5	2	\|a PQ20160617
035			\|a (DE-627)OLC1966513712
035			\|a (DE-599)GBVOLC1966513712
035			\|a (PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200
035			\|a (KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb
040			\|a DE-627 \|b ger \|c DE-627 \|e rakwb
041			\|a eng
082	0	4	\|a 530 \|q DNB
084			\|a 33.80 \|2 bkl
100	1		\|a Cohen, Isaac Jacob \|e verfasserin \|4 aut
245	1	0	\|a Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications
264		1	\|c 2015
336			\|a Text \|b txt \|2 rdacontent
337			\|a ohne Hilfsmittel zu benutzen \|b n \|2 rdamedia
338			\|a Band \|b nc \|2 rdacarrier
520			\|a There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here.
650		4	\|a high-rate directed energy
650		4	\|a transient loads
650		4	\|a ac bus
650		4	\|a power quality
650		4	\|a electrochemical energy storage devices
650		4	\|a actively controlled hybrid energy storage module
650		4	\|a power electronics
650		4	\|a Generators
650		4	\|a commercial off-the-shelf power electronic converters
650		4	\|a Power supplies
650		4	\|a Batteries
650		4	\|a high-energy batteries
650		4	\|a LIBs
650		4	\|a battery life cycle
650		4	\|a high-power electric double layer capacitors
650		4	\|a supercapacitors
650		4	\|a compact prime power supply
650		4	\|a Inverters
650		4	\|a high-power density
650		4	\|a power supply quality
650		4	\|a lithium-ion batteries
650		4	\|a lithium
650		4	\|a fossil fuel generator
650		4	\|a Energy storage
650		4	\|a actively controlled power electronics
650		4	\|a directed energy weapons
650		4	\|a power convertors
650		4	\|a secondary cells
650		4	\|a EDLCs
650		4	\|a high-energy reservoir
650		4	\|a electrical grid backup
650		4	\|a lithium batteries
650		4	\|a Capacitors
650		4	\|a HESM
650		4	\|a high-energy density
650		4	\|a Electrical currents
650		4	\|a Energy efficiency
650		4	\|a Electrical design
650		4	\|a Hybridization
650		4	\|a Power supply
700	1		\|a Wetz, David Alan \|4 oth
700	1		\|a Heinzel, John M \|4 oth
700	0		\|a Qing Dong \|4 oth
773	0	8	\|i Enthalten in \|t IEEE transactions on plasma science \|d New York, NY : IEEE, 1973 \|g 43(2015), 5, Seite 1427-1433 \|w (DE-627)129391379 \|w (DE-600)184848-3 \|w (DE-576)014776553 \|x 0093-3813 \|7 nnns
773	1	8	\|g volume:43 \|g year:2015 \|g number:5 \|g pages:1427-1433
856	4	1	\|u http://dx.doi.org/10.1109/TPS.2014.2370053 \|3 Volltext
856	4	2	\|u http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789
856	4	2	\|u http://search.proquest.com/docview/1682696043
912			\|a GBV_USEFLAG_A
912			\|a SYSFLAG_A
912			\|a GBV_OLC
912			\|a SSG-OLC-PHY
912			\|a GBV_ILN_70
936	b	k	\|a 33.80 \|q AVZ
951			\|a AR
952			\|d 43 \|j 2015 \|e 5 \|h 1427-1433

Indexfelder

author_variant	i j c ij ijc
matchkey_str	article:00933813:2015----::einncaatrztooaatvlcnrlehbieegsoaeoueohgr
hierarchy_sort_str	2015
bklnumber	33.80
publishDate	2015
allfields	10.1109/TPS.2014.2370053 doi PQ20160617 (DE-627)OLC1966513712 (DE-599)GBVOLC1966513712 (PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200 (KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb DE-627 ger DE-627 rakwb eng 530 DNB 33.80 bkl Cohen, Isaac Jacob verfasserin aut Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications 2015 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here. high-rate directed energy transient loads ac bus power quality electrochemical energy storage devices actively controlled hybrid energy storage module power electronics Generators commercial off-the-shelf power electronic converters Power supplies Batteries high-energy batteries LIBs battery life cycle high-power electric double layer capacitors supercapacitors compact prime power supply Inverters high-power density power supply quality lithium-ion batteries lithium fossil fuel generator Energy storage actively controlled power electronics directed energy weapons power convertors secondary cells EDLCs high-energy reservoir electrical grid backup lithium batteries Capacitors HESM high-energy density Electrical currents Energy efficiency Electrical design Hybridization Power supply Wetz, David Alan oth Heinzel, John M oth Qing Dong oth Enthalten in IEEE transactions on plasma science New York, NY : IEEE, 1973 43(2015), 5, Seite 1427-1433 (DE-627)129391379 (DE-600)184848-3 (DE-576)014776553 0093-3813 nnns volume:43 year:2015 number:5 pages:1427-1433 http://dx.doi.org/10.1109/TPS.2014.2370053 Volltext http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789 http://search.proquest.com/docview/1682696043 GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-PHY GBV_ILN_70 33.80 AVZ AR 43 2015 5 1427-1433
spelling	10.1109/TPS.2014.2370053 doi PQ20160617 (DE-627)OLC1966513712 (DE-599)GBVOLC1966513712 (PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200 (KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb DE-627 ger DE-627 rakwb eng 530 DNB 33.80 bkl Cohen, Isaac Jacob verfasserin aut Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications 2015 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here. high-rate directed energy transient loads ac bus power quality electrochemical energy storage devices actively controlled hybrid energy storage module power electronics Generators commercial off-the-shelf power electronic converters Power supplies Batteries high-energy batteries LIBs battery life cycle high-power electric double layer capacitors supercapacitors compact prime power supply Inverters high-power density power supply quality lithium-ion batteries lithium fossil fuel generator Energy storage actively controlled power electronics directed energy weapons power convertors secondary cells EDLCs high-energy reservoir electrical grid backup lithium batteries Capacitors HESM high-energy density Electrical currents Energy efficiency Electrical design Hybridization Power supply Wetz, David Alan oth Heinzel, John M oth Qing Dong oth Enthalten in IEEE transactions on plasma science New York, NY : IEEE, 1973 43(2015), 5, Seite 1427-1433 (DE-627)129391379 (DE-600)184848-3 (DE-576)014776553 0093-3813 nnns volume:43 year:2015 number:5 pages:1427-1433 http://dx.doi.org/10.1109/TPS.2014.2370053 Volltext http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789 http://search.proquest.com/docview/1682696043 GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-PHY GBV_ILN_70 33.80 AVZ AR 43 2015 5 1427-1433
allfields_unstemmed	10.1109/TPS.2014.2370053 doi PQ20160617 (DE-627)OLC1966513712 (DE-599)GBVOLC1966513712 (PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200 (KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb DE-627 ger DE-627 rakwb eng 530 DNB 33.80 bkl Cohen, Isaac Jacob verfasserin aut Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications 2015 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here. high-rate directed energy transient loads ac bus power quality electrochemical energy storage devices actively controlled hybrid energy storage module power electronics Generators commercial off-the-shelf power electronic converters Power supplies Batteries high-energy batteries LIBs battery life cycle high-power electric double layer capacitors supercapacitors compact prime power supply Inverters high-power density power supply quality lithium-ion batteries lithium fossil fuel generator Energy storage actively controlled power electronics directed energy weapons power convertors secondary cells EDLCs high-energy reservoir electrical grid backup lithium batteries Capacitors HESM high-energy density Electrical currents Energy efficiency Electrical design Hybridization Power supply Wetz, David Alan oth Heinzel, John M oth Qing Dong oth Enthalten in IEEE transactions on plasma science New York, NY : IEEE, 1973 43(2015), 5, Seite 1427-1433 (DE-627)129391379 (DE-600)184848-3 (DE-576)014776553 0093-3813 nnns volume:43 year:2015 number:5 pages:1427-1433 http://dx.doi.org/10.1109/TPS.2014.2370053 Volltext http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789 http://search.proquest.com/docview/1682696043 GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-PHY GBV_ILN_70 33.80 AVZ AR 43 2015 5 1427-1433
allfieldsGer	10.1109/TPS.2014.2370053 doi PQ20160617 (DE-627)OLC1966513712 (DE-599)GBVOLC1966513712 (PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200 (KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb DE-627 ger DE-627 rakwb eng 530 DNB 33.80 bkl Cohen, Isaac Jacob verfasserin aut Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications 2015 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here. high-rate directed energy transient loads ac bus power quality electrochemical energy storage devices actively controlled hybrid energy storage module power electronics Generators commercial off-the-shelf power electronic converters Power supplies Batteries high-energy batteries LIBs battery life cycle high-power electric double layer capacitors supercapacitors compact prime power supply Inverters high-power density power supply quality lithium-ion batteries lithium fossil fuel generator Energy storage actively controlled power electronics directed energy weapons power convertors secondary cells EDLCs high-energy reservoir electrical grid backup lithium batteries Capacitors HESM high-energy density Electrical currents Energy efficiency Electrical design Hybridization Power supply Wetz, David Alan oth Heinzel, John M oth Qing Dong oth Enthalten in IEEE transactions on plasma science New York, NY : IEEE, 1973 43(2015), 5, Seite 1427-1433 (DE-627)129391379 (DE-600)184848-3 (DE-576)014776553 0093-3813 nnns volume:43 year:2015 number:5 pages:1427-1433 http://dx.doi.org/10.1109/TPS.2014.2370053 Volltext http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789 http://search.proquest.com/docview/1682696043 GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-PHY GBV_ILN_70 33.80 AVZ AR 43 2015 5 1427-1433
allfieldsSound	10.1109/TPS.2014.2370053 doi PQ20160617 (DE-627)OLC1966513712 (DE-599)GBVOLC1966513712 (PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200 (KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb DE-627 ger DE-627 rakwb eng 530 DNB 33.80 bkl Cohen, Isaac Jacob verfasserin aut Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications 2015 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here. high-rate directed energy transient loads ac bus power quality electrochemical energy storage devices actively controlled hybrid energy storage module power electronics Generators commercial off-the-shelf power electronic converters Power supplies Batteries high-energy batteries LIBs battery life cycle high-power electric double layer capacitors supercapacitors compact prime power supply Inverters high-power density power supply quality lithium-ion batteries lithium fossil fuel generator Energy storage actively controlled power electronics directed energy weapons power convertors secondary cells EDLCs high-energy reservoir electrical grid backup lithium batteries Capacitors HESM high-energy density Electrical currents Energy efficiency Electrical design Hybridization Power supply Wetz, David Alan oth Heinzel, John M oth Qing Dong oth Enthalten in IEEE transactions on plasma science New York, NY : IEEE, 1973 43(2015), 5, Seite 1427-1433 (DE-627)129391379 (DE-600)184848-3 (DE-576)014776553 0093-3813 nnns volume:43 year:2015 number:5 pages:1427-1433 http://dx.doi.org/10.1109/TPS.2014.2370053 Volltext http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789 http://search.proquest.com/docview/1682696043 GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-PHY GBV_ILN_70 33.80 AVZ AR 43 2015 5 1427-1433
language	English
source	Enthalten in IEEE transactions on plasma science 43(2015), 5, Seite 1427-1433 volume:43 year:2015 number:5 pages:1427-1433
sourceStr	Enthalten in IEEE transactions on plasma science 43(2015), 5, Seite 1427-1433 volume:43 year:2015 number:5 pages:1427-1433
format_phy_str_mv	Article
institution	findex.gbv.de
topic_facet	high-rate directed energy transient loads ac bus power quality electrochemical energy storage devices actively controlled hybrid energy storage module power electronics Generators commercial off-the-shelf power electronic converters Power supplies Batteries high-energy batteries LIBs battery life cycle high-power electric double layer capacitors supercapacitors compact prime power supply Inverters high-power density power supply quality lithium-ion batteries lithium fossil fuel generator Energy storage actively controlled power electronics directed energy weapons power convertors secondary cells EDLCs high-energy reservoir electrical grid backup lithium batteries Capacitors HESM high-energy density Electrical currents Energy efficiency Electrical design Hybridization Power supply
dewey-raw	530
isfreeaccess_bool	false
container_title	IEEE transactions on plasma science
authorswithroles_txt_mv	Cohen, Isaac Jacob @@aut@@ Wetz, David Alan @@oth@@ Heinzel, John M @@oth@@ Qing Dong @@oth@@
publishDateDaySort_date	2015-01-01T00:00:00Z
hierarchy_top_id	129391379
dewey-sort	3530
id	OLC1966513712
language_de	englisch
fullrecord	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a2200265 4500</leader><controlfield tag="001">OLC1966513712</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20220221143459.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">160206s2015 xx \|\|\|\|\| 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1109/TPS.2014.2370053</subfield><subfield code="2">doi</subfield></datafield><datafield tag="028" ind1="5" ind2="2"><subfield code="a">PQ20160617</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC1966513712</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)GBVOLC1966513712</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">530</subfield><subfield code="q">DNB</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">33.80</subfield><subfield code="2">bkl</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Cohen, Isaac Jacob</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2015</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-rate directed energy</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">transient loads</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">ac bus</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">power quality</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">electrochemical energy storage devices</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">actively controlled hybrid energy storage module</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">power electronics</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Generators</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">commercial off-the-shelf power electronic converters</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Power supplies</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Batteries</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-energy batteries</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">LIBs</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">battery life cycle</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-power electric double layer capacitors</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">supercapacitors</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">compact prime power supply</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Inverters</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-power density</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">power supply quality</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">lithium-ion batteries</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">lithium</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">fossil fuel generator</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Energy storage</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">actively controlled power electronics</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">directed energy weapons</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">power convertors</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">secondary cells</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">EDLCs</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-energy reservoir</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">electrical grid backup</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">lithium batteries</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Capacitors</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">HESM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-energy density</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electrical currents</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Energy efficiency</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electrical design</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Hybridization</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Power supply</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Wetz, David Alan</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Heinzel, John M</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Qing Dong</subfield><subfield code="4">oth</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">IEEE transactions on plasma science</subfield><subfield code="d">New York, NY : IEEE, 1973</subfield><subfield code="g">43(2015), 5, Seite 1427-1433</subfield><subfield code="w">(DE-627)129391379</subfield><subfield code="w">(DE-600)184848-3</subfield><subfield code="w">(DE-576)014776553</subfield><subfield code="x">0093-3813</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:43</subfield><subfield code="g">year:2015</subfield><subfield code="g">number:5</subfield><subfield code="g">pages:1427-1433</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">http://dx.doi.org/10.1109/TPS.2014.2370053</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://search.proquest.com/docview/1682696043</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-PHY</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="936" ind1="b" ind2="k"><subfield code="a">33.80</subfield><subfield code="q">AVZ</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">43</subfield><subfield code="j">2015</subfield><subfield code="e">5</subfield><subfield code="h">1427-1433</subfield></datafield></record></collection>
author	Cohen, Isaac Jacob
spellingShingle	Cohen, Isaac Jacob ddc 530 bkl 33.80 misc high-rate directed energy misc transient loads misc ac bus misc power quality misc electrochemical energy storage devices misc actively controlled hybrid energy storage module misc power electronics misc Generators misc commercial off-the-shelf power electronic converters misc Power supplies misc Batteries misc high-energy batteries misc LIBs misc battery life cycle misc high-power electric double layer capacitors misc supercapacitors misc compact prime power supply misc Inverters misc high-power density misc power supply quality misc lithium-ion batteries misc lithium misc fossil fuel generator misc Energy storage misc actively controlled power electronics misc directed energy weapons misc power convertors misc secondary cells misc EDLCs misc high-energy reservoir misc electrical grid backup misc lithium batteries misc Capacitors misc HESM misc high-energy density misc Electrical currents misc Energy efficiency misc Electrical design misc Hybridization misc Power supply Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications
authorStr	Cohen, Isaac Jacob
ppnlink_with_tag_str_mv	@@773@@(DE-627)129391379
format	Article
dewey-ones	530 - Physics
delete_txt_mv	keep
author_role	aut
collection	OLC
remote_str	false
illustrated	Not Illustrated
issn	0093-3813
topic_title	530 DNB 33.80 bkl Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications high-rate directed energy transient loads ac bus power quality electrochemical energy storage devices actively controlled hybrid energy storage module power electronics Generators commercial off-the-shelf power electronic converters Power supplies Batteries high-energy batteries LIBs battery life cycle high-power electric double layer capacitors supercapacitors compact prime power supply Inverters high-power density power supply quality lithium-ion batteries lithium fossil fuel generator Energy storage actively controlled power electronics directed energy weapons power convertors secondary cells EDLCs high-energy reservoir electrical grid backup lithium batteries Capacitors HESM high-energy density Electrical currents Energy efficiency Electrical design Hybridization Power supply
topic	ddc 530 bkl 33.80 misc high-rate directed energy misc transient loads misc ac bus misc power quality misc electrochemical energy storage devices misc actively controlled hybrid energy storage module misc power electronics misc Generators misc commercial off-the-shelf power electronic converters misc Power supplies misc Batteries misc high-energy batteries misc LIBs misc battery life cycle misc high-power electric double layer capacitors misc supercapacitors misc compact prime power supply misc Inverters misc high-power density misc power supply quality misc lithium-ion batteries misc lithium misc fossil fuel generator misc Energy storage misc actively controlled power electronics misc directed energy weapons misc power convertors misc secondary cells misc EDLCs misc high-energy reservoir misc electrical grid backup misc lithium batteries misc Capacitors misc HESM misc high-energy density misc Electrical currents misc Energy efficiency misc Electrical design misc Hybridization misc Power supply
topic_unstemmed	ddc 530 bkl 33.80 misc high-rate directed energy misc transient loads misc ac bus misc power quality misc electrochemical energy storage devices misc actively controlled hybrid energy storage module misc power electronics misc Generators misc commercial off-the-shelf power electronic converters misc Power supplies misc Batteries misc high-energy batteries misc LIBs misc battery life cycle misc high-power electric double layer capacitors misc supercapacitors misc compact prime power supply misc Inverters misc high-power density misc power supply quality misc lithium-ion batteries misc lithium misc fossil fuel generator misc Energy storage misc actively controlled power electronics misc directed energy weapons misc power convertors misc secondary cells misc EDLCs misc high-energy reservoir misc electrical grid backup misc lithium batteries misc Capacitors misc HESM misc high-energy density misc Electrical currents misc Energy efficiency misc Electrical design misc Hybridization misc Power supply
topic_browse	ddc 530 bkl 33.80 misc high-rate directed energy misc transient loads misc ac bus misc power quality misc electrochemical energy storage devices misc actively controlled hybrid energy storage module misc power electronics misc Generators misc commercial off-the-shelf power electronic converters misc Power supplies misc Batteries misc high-energy batteries misc LIBs misc battery life cycle misc high-power electric double layer capacitors misc supercapacitors misc compact prime power supply misc Inverters misc high-power density misc power supply quality misc lithium-ion batteries misc lithium misc fossil fuel generator misc Energy storage misc actively controlled power electronics misc directed energy weapons misc power convertors misc secondary cells misc EDLCs misc high-energy reservoir misc electrical grid backup misc lithium batteries misc Capacitors misc HESM misc high-energy density misc Electrical currents misc Energy efficiency misc Electrical design misc Hybridization misc Power supply
format_facet	Aufsätze Gedruckte Aufsätze
format_main_str_mv	Text Zeitschrift/Artikel
carriertype_str_mv	nc
author2_variant	d a w da daw j m h jm jmh q d qd
hierarchy_parent_title	IEEE transactions on plasma science
hierarchy_parent_id	129391379
dewey-tens	530 - Physics
hierarchy_top_title	IEEE transactions on plasma science
isfreeaccess_txt	false
familylinks_str_mv	(DE-627)129391379 (DE-600)184848-3 (DE-576)014776553
title	Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications
ctrlnum	(DE-627)OLC1966513712 (DE-599)GBVOLC1966513712 (PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200 (KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb
title_full	Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications
author_sort	Cohen, Isaac Jacob
journal	IEEE transactions on plasma science
journalStr	IEEE transactions on plasma science
lang_code	eng
isOA_bool	false
dewey-hundreds	500 - Science
recordtype	marc
publishDateSort	2015
contenttype_str_mv	txt
container_start_page	1427
author_browse	Cohen, Isaac Jacob
container_volume	43
class	530 DNB 33.80 bkl
format_se	Aufsätze
author-letter	Cohen, Isaac Jacob
doi_str_mv	10.1109/TPS.2014.2370053
dewey-full	530
title_sort	design and characterization of an actively controlled hybrid energy storage module for high-rate directed energy applications
title_auth	Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications
abstract	There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here.
abstractGer	There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here.
abstract_unstemmed	There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here.
collection_details	GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-PHY GBV_ILN_70
container_issue	5
title_short	Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications
url	http://dx.doi.org/10.1109/TPS.2014.2370053 http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789 http://search.proquest.com/docview/1682696043
remote_bool	false
author2	Wetz, David Alan Heinzel, John M Qing Dong
author2Str	Wetz, David Alan Heinzel, John M Qing Dong
ppnlink	129391379
mediatype_str_mv	n
isOA_txt	false
hochschulschrift_bool	false
author2_role	oth oth oth
doi_str	10.1109/TPS.2014.2370053
up_date	2024-07-03T21:52:45.496Z
_version_	1803596401736679424
fullrecord_marcxml	<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a2200265 4500</leader><controlfield tag="001">OLC1966513712</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20220221143459.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">160206s2015 xx \|\|\|\|\| 00\| \|\|eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1109/TPS.2014.2370053</subfield><subfield code="2">doi</subfield></datafield><datafield tag="028" ind1="5" ind2="2"><subfield code="a">PQ20160617</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC1966513712</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-599)GBVOLC1966513712</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(PRQ)c2346-e7f56794777753b8e73cc4b8a2684280291ba4c95086b76680f8a4d497882b200</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(KEY)0058744320150000043000501427designandcharacterizationofanactivelycontrolledhyb</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">530</subfield><subfield code="q">DNB</subfield></datafield><datafield tag="084" ind1=" " ind2=" "><subfield code="a">33.80</subfield><subfield code="2">bkl</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Cohen, Isaac Jacob</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2015</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">There is considerable need for a mobile, reliable, efficient, and compact prime power supply for a host of applications, including directed energy and electrical grid backup among others. Electrochemical energy storage devices, which possess either high-power density or high-energy density, have been developed recently and are very applicable for use in these applications. The need for both high energy and high power, however, makes the design and implementation of such a prime power supply a nontrivial task. While lithium-ion batteries (LIBs) are available, which possess both high power and energy density, operation at high power reduces their cycle life, decreasing the reliability and increasing the cost of the system when replacement becomes necessary more frequently. One proposed method involves optimally combining high-energy batteries with high-power electric double layer capacitors (EDLCs) using actively controlled power electronics to regulate the current to and from each respective device. In such a scheme, energy can be slowly sourced to and from the batteries, while the capacitors are used to supply or accept the bulk of the current when the demand is high, especially during fast transients. This type of scheme should not only maximize the batteries' cycle life and ensure that both the energy and power required of the load(s) is always available, but will also increase the instantaneous power capabilities of the system, offering a well-rounded solution to sourcing steady and/or transient loads. When augmenting a fossil fuel generator with a hybrid energy storage module (HESM), the HESM has the ability to act as a high-energy reservoir that can harvest energy from the generator when the loads are in short periods of inactivity. This enables the generator to be continuously base loaded, thereby maintaining a high level of efficiency at all times, while theoretically maintaining the required power quality of the main ac bus. At the University of Texas at Arlington (UTA), an actively controlled, high-rate HESM has been constructed to evaluate its performance under the typical load condition presented by directed energy weapons. It has been assembled using LIBs, EDLCs, and commercial off-the-shelf power electronic converters. A discussion about the future of HESMs, the experimental setup at UTA, and the results obtained thus far will be presented here.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-rate directed energy</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">transient loads</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">ac bus</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">power quality</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">electrochemical energy storage devices</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">actively controlled hybrid energy storage module</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">power electronics</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Generators</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">commercial off-the-shelf power electronic converters</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Power supplies</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Batteries</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-energy batteries</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">LIBs</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">battery life cycle</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-power electric double layer capacitors</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">supercapacitors</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">compact prime power supply</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Inverters</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-power density</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">power supply quality</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">lithium-ion batteries</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">lithium</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">fossil fuel generator</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Energy storage</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">actively controlled power electronics</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">directed energy weapons</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">power convertors</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">secondary cells</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">EDLCs</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-energy reservoir</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">electrical grid backup</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">lithium batteries</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Capacitors</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">HESM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">high-energy density</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electrical currents</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Energy efficiency</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Electrical design</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Hybridization</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Power supply</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Wetz, David Alan</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Heinzel, John M</subfield><subfield code="4">oth</subfield></datafield><datafield tag="700" ind1="0" ind2=" "><subfield code="a">Qing Dong</subfield><subfield code="4">oth</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">IEEE transactions on plasma science</subfield><subfield code="d">New York, NY : IEEE, 1973</subfield><subfield code="g">43(2015), 5, Seite 1427-1433</subfield><subfield code="w">(DE-627)129391379</subfield><subfield code="w">(DE-600)184848-3</subfield><subfield code="w">(DE-576)014776553</subfield><subfield code="x">0093-3813</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:43</subfield><subfield code="g">year:2015</subfield><subfield code="g">number:5</subfield><subfield code="g">pages:1427-1433</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">http://dx.doi.org/10.1109/TPS.2014.2370053</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6966789</subfield></datafield><datafield tag="856" ind1="4" ind2="2"><subfield code="u">http://search.proquest.com/docview/1682696043</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-PHY</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="936" ind1="b" ind2="k"><subfield code="a">33.80</subfield><subfield code="q">AVZ</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">43</subfield><subfield code="j">2015</subfield><subfield code="e">5</subfield><subfield code="h">1427-1433</subfield></datafield></record></collection>
score	7.399617

Nicht das Richtige dabei?

Schreiben Sie uns!

Design and Characterization of an Actively Controlled Hybrid Energy Storage Module for High-Rate Directed Energy Applications

Nicht das Richtige dabei?

Zugang & Verfügbarkeit

Vorhandene Bände

Nicht das Richtige dabei?