Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy
Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the b...
Ausführliche Beschreibung
Gespeichert in:
| Autor*in: |
Zhou, L. [verfasserIn] |
|---|
| Format: |
Artikel |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
2017 |
|---|
| Schlagwörter: |
|---|
| Anmerkung: |
© Springer-Verlag London 2017 |
|---|
| Übergeordnetes Werk: |
Enthalten in: The international journal of advanced manufacturing technology - Springer London, 1985, 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 |
|---|---|
| Übergeordnetes Werk: |
volume:92 ; year:2017 ; number:9-12 ; day:26 ; month:04 ; pages:3425-3433 |
| Links: |
|---|
| DOI / URN: |
10.1007/s00170-017-0359-1 |
|---|
| Katalog-ID: |
OLC2026106762 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | OLC2026106762 | ||
| 003 | DE-627 | ||
| 005 | 20230323141332.0 | ||
| 007 | tu | ||
| 008 | 200820s2017 xx ||||| 00| ||eng c | ||
| 024 | 7 | |a 10.1007/s00170-017-0359-1 |2 doi | |
| 035 | |a (DE-627)OLC2026106762 | ||
| 035 | |a (DE-He213)s00170-017-0359-1-p | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 082 | 0 | 4 | |a 670 |q VZ |
| 100 | 1 | |a Zhou, L. |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy |
| 264 | 1 | |c 2017 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ohne Hilfsmittel zu benutzen |b n |2 rdamedia | ||
| 338 | |a Band |b nc |2 rdacarrier | ||
| 500 | |a © Springer-Verlag London 2017 | ||
| 520 | |a Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. | ||
| 650 | 4 | |a Refill friction stir spot welding | |
| 650 | 4 | |a Keyhole | |
| 650 | 4 | |a Microstructure | |
| 650 | 4 | |a Mechanical properties | |
| 700 | 1 | |a Luo, L. Y. |4 aut | |
| 700 | 1 | |a Zhang, T. P. |4 aut | |
| 700 | 1 | |a He, W. X. |4 aut | |
| 700 | 1 | |a Huang, Y. X. |4 aut | |
| 700 | 1 | |a Feng, J. C. |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t The international journal of advanced manufacturing technology |d Springer London, 1985 |g 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 |w (DE-627)129185299 |w (DE-600)52651-4 |w (DE-576)014456192 |x 0268-3768 |7 nnns |
| 773 | 1 | 8 | |g volume:92 |g year:2017 |g number:9-12 |g day:26 |g month:04 |g pages:3425-3433 |
| 856 | 4 | 1 | |u https://doi.org/10.1007/s00170-017-0359-1 |z lizenzpflichtig |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a SYSFLAG_A | ||
| 912 | |a GBV_OLC | ||
| 912 | |a SSG-OLC-TEC | ||
| 912 | |a GBV_ILN_70 | ||
| 912 | |a GBV_ILN_2018 | ||
| 912 | |a GBV_ILN_2333 | ||
| 951 | |a AR | ||
| 952 | |d 92 |j 2017 |e 9-12 |b 26 |c 04 |h 3425-3433 | ||
| author_variant |
l z lz l y l ly lyl t p z tp tpz w x h wx wxh y x h yx yxh j c f jc jcf |
|---|---|
| matchkey_str |
article:02683768:2017----::fetfoainpeomcotutradehnclrprisfeilrcintr |
| hierarchy_sort_str |
2017 |
| publishDate |
2017 |
| allfields |
10.1007/s00170-017-0359-1 doi (DE-627)OLC2026106762 (DE-He213)s00170-017-0359-1-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, L. verfasserin aut Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy 2017 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London 2017 Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. Refill friction stir spot welding Keyhole Microstructure Mechanical properties Luo, L. Y. aut Zhang, T. P. aut He, W. X. aut Huang, Y. X. aut Feng, J. C. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:92 year:2017 number:9-12 day:26 month:04 pages:3425-3433 https://doi.org/10.1007/s00170-017-0359-1 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 92 2017 9-12 26 04 3425-3433 |
| spelling |
10.1007/s00170-017-0359-1 doi (DE-627)OLC2026106762 (DE-He213)s00170-017-0359-1-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, L. verfasserin aut Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy 2017 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London 2017 Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. Refill friction stir spot welding Keyhole Microstructure Mechanical properties Luo, L. Y. aut Zhang, T. P. aut He, W. X. aut Huang, Y. X. aut Feng, J. C. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:92 year:2017 number:9-12 day:26 month:04 pages:3425-3433 https://doi.org/10.1007/s00170-017-0359-1 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 92 2017 9-12 26 04 3425-3433 |
| allfields_unstemmed |
10.1007/s00170-017-0359-1 doi (DE-627)OLC2026106762 (DE-He213)s00170-017-0359-1-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, L. verfasserin aut Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy 2017 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London 2017 Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. Refill friction stir spot welding Keyhole Microstructure Mechanical properties Luo, L. Y. aut Zhang, T. P. aut He, W. X. aut Huang, Y. X. aut Feng, J. C. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:92 year:2017 number:9-12 day:26 month:04 pages:3425-3433 https://doi.org/10.1007/s00170-017-0359-1 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 92 2017 9-12 26 04 3425-3433 |
| allfieldsGer |
10.1007/s00170-017-0359-1 doi (DE-627)OLC2026106762 (DE-He213)s00170-017-0359-1-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, L. verfasserin aut Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy 2017 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London 2017 Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. Refill friction stir spot welding Keyhole Microstructure Mechanical properties Luo, L. Y. aut Zhang, T. P. aut He, W. X. aut Huang, Y. X. aut Feng, J. C. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:92 year:2017 number:9-12 day:26 month:04 pages:3425-3433 https://doi.org/10.1007/s00170-017-0359-1 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 92 2017 9-12 26 04 3425-3433 |
| allfieldsSound |
10.1007/s00170-017-0359-1 doi (DE-627)OLC2026106762 (DE-He213)s00170-017-0359-1-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, L. verfasserin aut Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy 2017 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London 2017 Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. Refill friction stir spot welding Keyhole Microstructure Mechanical properties Luo, L. Y. aut Zhang, T. P. aut He, W. X. aut Huang, Y. X. aut Feng, J. C. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:92 year:2017 number:9-12 day:26 month:04 pages:3425-3433 https://doi.org/10.1007/s00170-017-0359-1 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 92 2017 9-12 26 04 3425-3433 |
| language |
English |
| source |
Enthalten in The international journal of advanced manufacturing technology 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 volume:92 year:2017 number:9-12 day:26 month:04 pages:3425-3433 |
| sourceStr |
Enthalten in The international journal of advanced manufacturing technology 92(2017), 9-12 vom: 26. Apr., Seite 3425-3433 volume:92 year:2017 number:9-12 day:26 month:04 pages:3425-3433 |
| format_phy_str_mv |
Article |
| institution |
findex.gbv.de |
| topic_facet |
Refill friction stir spot welding Keyhole Microstructure Mechanical properties |
| dewey-raw |
670 |
| isfreeaccess_bool |
false |
| container_title |
The international journal of advanced manufacturing technology |
| authorswithroles_txt_mv |
Zhou, L. @@aut@@ Luo, L. Y. @@aut@@ Zhang, T. P. @@aut@@ He, W. X. @@aut@@ Huang, Y. X. @@aut@@ Feng, J. C. @@aut@@ |
| publishDateDaySort_date |
2017-04-26T00:00:00Z |
| hierarchy_top_id |
129185299 |
| dewey-sort |
3670 |
| id |
OLC2026106762 |
| language_de |
englisch |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">OLC2026106762</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230323141332.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">200820s2017 xx ||||| 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/s00170-017-0359-1</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC2026106762</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-He213)s00170-017-0359-1-p</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">670</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Zhou, L.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2017</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">© Springer-Verlag London 2017</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Refill friction stir spot welding</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Keyhole</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Microstructure</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Mechanical properties</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Luo, L. Y.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Zhang, T. P.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">He, W. X.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Huang, Y. X.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Feng, J. C.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">The international journal of advanced manufacturing technology</subfield><subfield code="d">Springer London, 1985</subfield><subfield code="g">92(2017), 9-12 vom: 26. Apr., Seite 3425-3433</subfield><subfield code="w">(DE-627)129185299</subfield><subfield code="w">(DE-600)52651-4</subfield><subfield code="w">(DE-576)014456192</subfield><subfield code="x">0268-3768</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:92</subfield><subfield code="g">year:2017</subfield><subfield code="g">number:9-12</subfield><subfield code="g">day:26</subfield><subfield code="g">month:04</subfield><subfield code="g">pages:3425-3433</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">https://doi.org/10.1007/s00170-017-0359-1</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-TEC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2018</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2333</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">92</subfield><subfield code="j">2017</subfield><subfield code="e">9-12</subfield><subfield code="b">26</subfield><subfield code="c">04</subfield><subfield code="h">3425-3433</subfield></datafield></record></collection>
|
| author |
Zhou, L. |
| spellingShingle |
Zhou, L. ddc 670 misc Refill friction stir spot welding misc Keyhole misc Microstructure misc Mechanical properties Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy |
| authorStr |
Zhou, L. |
| ppnlink_with_tag_str_mv |
@@773@@(DE-627)129185299 |
| format |
Article |
| dewey-ones |
670 - Manufacturing |
| delete_txt_mv |
keep |
| author_role |
aut aut aut aut aut aut |
| collection |
OLC |
| remote_str |
false |
| illustrated |
Not Illustrated |
| issn |
0268-3768 |
| topic_title |
670 VZ Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy Refill friction stir spot welding Keyhole Microstructure Mechanical properties |
| topic |
ddc 670 misc Refill friction stir spot welding misc Keyhole misc Microstructure misc Mechanical properties |
| topic_unstemmed |
ddc 670 misc Refill friction stir spot welding misc Keyhole misc Microstructure misc Mechanical properties |
| topic_browse |
ddc 670 misc Refill friction stir spot welding misc Keyhole misc Microstructure misc Mechanical properties |
| format_facet |
Aufsätze Gedruckte Aufsätze |
| format_main_str_mv |
Text Zeitschrift/Artikel |
| carriertype_str_mv |
nc |
| hierarchy_parent_title |
The international journal of advanced manufacturing technology |
| hierarchy_parent_id |
129185299 |
| dewey-tens |
670 - Manufacturing |
| hierarchy_top_title |
The international journal of advanced manufacturing technology |
| isfreeaccess_txt |
false |
| familylinks_str_mv |
(DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 |
| title |
Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy |
| ctrlnum |
(DE-627)OLC2026106762 (DE-He213)s00170-017-0359-1-p |
| title_full |
Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy |
| author_sort |
Zhou, L. |
| journal |
The international journal of advanced manufacturing technology |
| journalStr |
The international journal of advanced manufacturing technology |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology |
| recordtype |
marc |
| publishDateSort |
2017 |
| contenttype_str_mv |
txt |
| container_start_page |
3425 |
| author_browse |
Zhou, L. Luo, L. Y. Zhang, T. P. He, W. X. Huang, Y. X. Feng, J. C. |
| container_volume |
92 |
| class |
670 VZ |
| format_se |
Aufsätze |
| author-letter |
Zhou, L. |
| doi_str_mv |
10.1007/s00170-017-0359-1 |
| dewey-full |
670 |
| title_sort |
effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-t6 aluminum alloy |
| title_auth |
Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy |
| abstract |
Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. © Springer-Verlag London 2017 |
| abstractGer |
Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. © Springer-Verlag London 2017 |
| abstract_unstemmed |
Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests. © Springer-Verlag London 2017 |
| collection_details |
GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 |
| container_issue |
9-12 |
| title_short |
Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy |
| url |
https://doi.org/10.1007/s00170-017-0359-1 |
| remote_bool |
false |
| author2 |
Luo, L. Y. Zhang, T. P. He, W. X. Huang, Y. X. Feng, J. C. |
| author2Str |
Luo, L. Y. Zhang, T. P. He, W. X. Huang, Y. X. Feng, J. C. |
| ppnlink |
129185299 |
| mediatype_str_mv |
n |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| doi_str |
10.1007/s00170-017-0359-1 |
| up_date |
2024-07-04T03:07:32.980Z |
| _version_ |
1803616206710636544 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">OLC2026106762</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230323141332.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">200820s2017 xx ||||| 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/s00170-017-0359-1</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC2026106762</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-He213)s00170-017-0359-1-p</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">670</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Zhou, L.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2017</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">© Springer-Verlag London 2017</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract Refill friction stir spot welding (RFSSW) has been used to weld 6061-T6 aluminum alloy, and keyhole free joints were successfully obtained. Effect of tool rotation speed on microstructure and mechanical properties of joint was investigated. The joint was divided into four zones, i.e., the base material (BM), heat-affected zone (HAZ), thermo-mechanically affected zone (TMAZ), and stir zone (SZ) according to microstructural evolution. Defect was not found on the surface of welded joint, but inner defects of partial bonding, bonding ligament, hook, and voids were observed within the welded joint. The microhardness of HAZ and TMAZ was lower than that of the BM, while the maximum microhardness was obtained in the SZ of welded joints. With increasing tool rotation speed from 1100 to 1700 rpm, microhardness decreased with increasing grain size in the weld. The maximum tensile shear failure load of 7522 N was obtained for the joint under tool rotation speed of 1500 rpm. Two different failure modes of plug fracture and tensile-shear mixed fracture were observed during the tensile shear tests.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Refill friction stir spot welding</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Keyhole</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Microstructure</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Mechanical properties</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Luo, L. Y.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Zhang, T. P.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">He, W. X.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Huang, Y. X.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Feng, J. C.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">The international journal of advanced manufacturing technology</subfield><subfield code="d">Springer London, 1985</subfield><subfield code="g">92(2017), 9-12 vom: 26. Apr., Seite 3425-3433</subfield><subfield code="w">(DE-627)129185299</subfield><subfield code="w">(DE-600)52651-4</subfield><subfield code="w">(DE-576)014456192</subfield><subfield code="x">0268-3768</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:92</subfield><subfield code="g">year:2017</subfield><subfield code="g">number:9-12</subfield><subfield code="g">day:26</subfield><subfield code="g">month:04</subfield><subfield code="g">pages:3425-3433</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">https://doi.org/10.1007/s00170-017-0359-1</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-TEC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2018</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2333</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">92</subfield><subfield code="j">2017</subfield><subfield code="e">9-12</subfield><subfield code="b">26</subfield><subfield code="c">04</subfield><subfield code="h">3425-3433</subfield></datafield></record></collection>
|
| score |
7.399205 |