Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material
Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unaccep...
Ausführliche Beschreibung
Gespeichert in:
| Autor*in: |
Hussein, R. [verfasserIn] |
|---|
| Format: |
Artikel |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
2018 |
|---|
| Schlagwörter: |
|---|
| Anmerkung: |
© Springer-Verlag London Ltd., part of Springer Nature 2018 |
|---|
| Übergeordnetes Werk: |
Enthalten in: The international journal of advanced manufacturing technology - Springer London, 1985, 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 |
|---|---|
| Übergeordnetes Werk: |
volume:98 ; year:2018 ; number:9-12 ; day:25 ; month:07 ; pages:2801-2817 |
| Links: |
|---|
| DOI / URN: |
10.1007/s00170-018-2410-2 |
|---|
| Katalog-ID: |
OLC2026126763 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | OLC2026126763 | ||
| 003 | DE-627 | ||
| 005 | 20230323141810.0 | ||
| 007 | tu | ||
| 008 | 200820s2018 xx ||||| 00| ||eng c | ||
| 024 | 7 | |a 10.1007/s00170-018-2410-2 |2 doi | |
| 035 | |a (DE-627)OLC2026126763 | ||
| 035 | |a (DE-He213)s00170-018-2410-2-p | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 082 | 0 | 4 | |a 670 |q VZ |
| 100 | 1 | |a Hussein, R. |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material |
| 264 | 1 | |c 2018 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ohne Hilfsmittel zu benutzen |b n |2 rdamedia | ||
| 338 | |a Band |b nc |2 rdacarrier | ||
| 500 | |a © Springer-Verlag London Ltd., part of Springer Nature 2018 | ||
| 520 | |a Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. | ||
| 650 | 4 | |a Vibration-assisted drilling | |
| 650 | 4 | |a Low-frequency vibration-assisted drilling | |
| 650 | 4 | |a CFRP/Ti6Al4V | |
| 650 | 4 | |a Stacked material | |
| 650 | 4 | |a Advanced machining | |
| 700 | 1 | |a Sadek, A. |4 aut | |
| 700 | 1 | |a Elbestawi, M. A. |4 aut | |
| 700 | 1 | |a Attia, M.H. |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t The international journal of advanced manufacturing technology |d Springer London, 1985 |g 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 |w (DE-627)129185299 |w (DE-600)52651-4 |w (DE-576)014456192 |x 0268-3768 |7 nnns |
| 773 | 1 | 8 | |g volume:98 |g year:2018 |g number:9-12 |g day:25 |g month:07 |g pages:2801-2817 |
| 856 | 4 | 1 | |u https://doi.org/10.1007/s00170-018-2410-2 |z lizenzpflichtig |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a SYSFLAG_A | ||
| 912 | |a GBV_OLC | ||
| 912 | |a SSG-OLC-TEC | ||
| 912 | |a GBV_ILN_70 | ||
| 912 | |a GBV_ILN_2018 | ||
| 912 | |a GBV_ILN_2333 | ||
| 951 | |a AR | ||
| 952 | |d 98 |j 2018 |e 9-12 |b 25 |c 07 |h 2801-2817 | ||
| author_variant |
r h rh a s as m a e ma mae m a ma |
|---|---|
| matchkey_str |
article:02683768:2018----::ofeunyirtoassedilnohbicrt |
| hierarchy_sort_str |
2018 |
| publishDate |
2018 |
| allfields |
10.1007/s00170-018-2410-2 doi (DE-627)OLC2026126763 (DE-He213)s00170-018-2410-2-p DE-627 ger DE-627 rakwb eng 670 VZ Hussein, R. verfasserin aut Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material 2018 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2018 Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. Vibration-assisted drilling Low-frequency vibration-assisted drilling CFRP/Ti6Al4V Stacked material Advanced machining Sadek, A. aut Elbestawi, M. A. aut Attia, M.H. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:98 year:2018 number:9-12 day:25 month:07 pages:2801-2817 https://doi.org/10.1007/s00170-018-2410-2 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 98 2018 9-12 25 07 2801-2817 |
| spelling |
10.1007/s00170-018-2410-2 doi (DE-627)OLC2026126763 (DE-He213)s00170-018-2410-2-p DE-627 ger DE-627 rakwb eng 670 VZ Hussein, R. verfasserin aut Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material 2018 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2018 Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. Vibration-assisted drilling Low-frequency vibration-assisted drilling CFRP/Ti6Al4V Stacked material Advanced machining Sadek, A. aut Elbestawi, M. A. aut Attia, M.H. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:98 year:2018 number:9-12 day:25 month:07 pages:2801-2817 https://doi.org/10.1007/s00170-018-2410-2 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 98 2018 9-12 25 07 2801-2817 |
| allfields_unstemmed |
10.1007/s00170-018-2410-2 doi (DE-627)OLC2026126763 (DE-He213)s00170-018-2410-2-p DE-627 ger DE-627 rakwb eng 670 VZ Hussein, R. verfasserin aut Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material 2018 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2018 Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. Vibration-assisted drilling Low-frequency vibration-assisted drilling CFRP/Ti6Al4V Stacked material Advanced machining Sadek, A. aut Elbestawi, M. A. aut Attia, M.H. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:98 year:2018 number:9-12 day:25 month:07 pages:2801-2817 https://doi.org/10.1007/s00170-018-2410-2 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 98 2018 9-12 25 07 2801-2817 |
| allfieldsGer |
10.1007/s00170-018-2410-2 doi (DE-627)OLC2026126763 (DE-He213)s00170-018-2410-2-p DE-627 ger DE-627 rakwb eng 670 VZ Hussein, R. verfasserin aut Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material 2018 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2018 Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. Vibration-assisted drilling Low-frequency vibration-assisted drilling CFRP/Ti6Al4V Stacked material Advanced machining Sadek, A. aut Elbestawi, M. A. aut Attia, M.H. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:98 year:2018 number:9-12 day:25 month:07 pages:2801-2817 https://doi.org/10.1007/s00170-018-2410-2 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 98 2018 9-12 25 07 2801-2817 |
| allfieldsSound |
10.1007/s00170-018-2410-2 doi (DE-627)OLC2026126763 (DE-He213)s00170-018-2410-2-p DE-627 ger DE-627 rakwb eng 670 VZ Hussein, R. verfasserin aut Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material 2018 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2018 Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. Vibration-assisted drilling Low-frequency vibration-assisted drilling CFRP/Ti6Al4V Stacked material Advanced machining Sadek, A. aut Elbestawi, M. A. aut Attia, M.H. aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:98 year:2018 number:9-12 day:25 month:07 pages:2801-2817 https://doi.org/10.1007/s00170-018-2410-2 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 98 2018 9-12 25 07 2801-2817 |
| language |
English |
| source |
Enthalten in The international journal of advanced manufacturing technology 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 volume:98 year:2018 number:9-12 day:25 month:07 pages:2801-2817 |
| sourceStr |
Enthalten in The international journal of advanced manufacturing technology 98(2018), 9-12 vom: 25. Juli, Seite 2801-2817 volume:98 year:2018 number:9-12 day:25 month:07 pages:2801-2817 |
| format_phy_str_mv |
Article |
| institution |
findex.gbv.de |
| topic_facet |
Vibration-assisted drilling Low-frequency vibration-assisted drilling CFRP/Ti6Al4V Stacked material Advanced machining |
| dewey-raw |
670 |
| isfreeaccess_bool |
false |
| container_title |
The international journal of advanced manufacturing technology |
| authorswithroles_txt_mv |
Hussein, R. @@aut@@ Sadek, A. @@aut@@ Elbestawi, M. A. @@aut@@ Attia, M.H. @@aut@@ |
| publishDateDaySort_date |
2018-07-25T00:00:00Z |
| hierarchy_top_id |
129185299 |
| dewey-sort |
3670 |
| id |
OLC2026126763 |
| language_de |
englisch |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">OLC2026126763</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230323141810.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">200820s2018 xx ||||| 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/s00170-018-2410-2</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC2026126763</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-He213)s00170-018-2410-2-p</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">670</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Hussein, R.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2018</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">© Springer-Verlag London Ltd., part of Springer Nature 2018</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Vibration-assisted drilling</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Low-frequency vibration-assisted drilling</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">CFRP/Ti6Al4V</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Stacked material</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Advanced machining</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Sadek, A.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Elbestawi, M. A.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Attia, M.H.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">The international journal of advanced manufacturing technology</subfield><subfield code="d">Springer London, 1985</subfield><subfield code="g">98(2018), 9-12 vom: 25. Juli, Seite 2801-2817</subfield><subfield code="w">(DE-627)129185299</subfield><subfield code="w">(DE-600)52651-4</subfield><subfield code="w">(DE-576)014456192</subfield><subfield code="x">0268-3768</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:98</subfield><subfield code="g">year:2018</subfield><subfield code="g">number:9-12</subfield><subfield code="g">day:25</subfield><subfield code="g">month:07</subfield><subfield code="g">pages:2801-2817</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">https://doi.org/10.1007/s00170-018-2410-2</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-TEC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2018</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2333</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">98</subfield><subfield code="j">2018</subfield><subfield code="e">9-12</subfield><subfield code="b">25</subfield><subfield code="c">07</subfield><subfield code="h">2801-2817</subfield></datafield></record></collection>
|
| author |
Hussein, R. |
| spellingShingle |
Hussein, R. ddc 670 misc Vibration-assisted drilling misc Low-frequency vibration-assisted drilling misc CFRP/Ti6Al4V misc Stacked material misc Advanced machining Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material |
| authorStr |
Hussein, R. |
| ppnlink_with_tag_str_mv |
@@773@@(DE-627)129185299 |
| format |
Article |
| dewey-ones |
670 - Manufacturing |
| delete_txt_mv |
keep |
| author_role |
aut aut aut aut |
| collection |
OLC |
| remote_str |
false |
| illustrated |
Not Illustrated |
| issn |
0268-3768 |
| topic_title |
670 VZ Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material Vibration-assisted drilling Low-frequency vibration-assisted drilling CFRP/Ti6Al4V Stacked material Advanced machining |
| topic |
ddc 670 misc Vibration-assisted drilling misc Low-frequency vibration-assisted drilling misc CFRP/Ti6Al4V misc Stacked material misc Advanced machining |
| topic_unstemmed |
ddc 670 misc Vibration-assisted drilling misc Low-frequency vibration-assisted drilling misc CFRP/Ti6Al4V misc Stacked material misc Advanced machining |
| topic_browse |
ddc 670 misc Vibration-assisted drilling misc Low-frequency vibration-assisted drilling misc CFRP/Ti6Al4V misc Stacked material misc Advanced machining |
| format_facet |
Aufsätze Gedruckte Aufsätze |
| format_main_str_mv |
Text Zeitschrift/Artikel |
| carriertype_str_mv |
nc |
| hierarchy_parent_title |
The international journal of advanced manufacturing technology |
| hierarchy_parent_id |
129185299 |
| dewey-tens |
670 - Manufacturing |
| hierarchy_top_title |
The international journal of advanced manufacturing technology |
| isfreeaccess_txt |
false |
| familylinks_str_mv |
(DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 |
| title |
Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material |
| ctrlnum |
(DE-627)OLC2026126763 (DE-He213)s00170-018-2410-2-p |
| title_full |
Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material |
| author_sort |
Hussein, R. |
| journal |
The international journal of advanced manufacturing technology |
| journalStr |
The international journal of advanced manufacturing technology |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology |
| recordtype |
marc |
| publishDateSort |
2018 |
| contenttype_str_mv |
txt |
| container_start_page |
2801 |
| author_browse |
Hussein, R. Sadek, A. Elbestawi, M. A. Attia, M.H. |
| container_volume |
98 |
| class |
670 VZ |
| format_se |
Aufsätze |
| author-letter |
Hussein, R. |
| doi_str_mv |
10.1007/s00170-018-2410-2 |
| dewey-full |
670 |
| title_sort |
low-frequency vibration-assisted drilling of hybrid cfrp/ti6al4v stacked material |
| title_auth |
Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material |
| abstract |
Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. © Springer-Verlag London Ltd., part of Springer Nature 2018 |
| abstractGer |
Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. © Springer-Verlag London Ltd., part of Springer Nature 2018 |
| abstract_unstemmed |
Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented. © Springer-Verlag London Ltd., part of Springer Nature 2018 |
| collection_details |
GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 |
| container_issue |
9-12 |
| title_short |
Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material |
| url |
https://doi.org/10.1007/s00170-018-2410-2 |
| remote_bool |
false |
| author2 |
Sadek, A. Elbestawi, M. A. Attia, M.H. |
| author2Str |
Sadek, A. Elbestawi, M. A. Attia, M.H. |
| ppnlink |
129185299 |
| mediatype_str_mv |
n |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| doi_str |
10.1007/s00170-018-2410-2 |
| up_date |
2024-07-04T03:10:39.642Z |
| _version_ |
1803616402432589824 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">OLC2026126763</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230323141810.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">200820s2018 xx ||||| 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/s00170-018-2410-2</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC2026126763</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-He213)s00170-018-2410-2-p</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">670</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Hussein, R.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2018</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">© Springer-Verlag London Ltd., part of Springer Nature 2018</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract The drilling of carbon fiber-reinforced polymers (CFRP) and Ti6Al4V alloy stacked materials play a significant role in the aerospace industry’s ability to achieve improved machinability and assembly. Conventional drilling has resulted in various challenges such as CFRP delamination, unacceptable hole accuracy, and high tool wear. In addition, high cutting temperatures and poor chip evacuation mechanisms were also identified as important difficulties necessitating the drilling of each material separately. Low-frequency vibration-assisted drilling (LF-VAD) promises a high potential for overcoming these challenges. The primary objective of this study was to investigate the effect of machining parameters (cutting speed, feed rate, modulation amplitude, and modulation frequency) on the LF-VAD stacked drilling of CFRP/Ti6Al4V. The effect of applying a 2.5-cycle/rev frequency modulation to a wide range of machining parameters is reported, and the results are discussed. The variables considered included cutting speed, feed rate, and modulation amplitude. The results show up to a 56% reduction in cutting temperature, as well as a change in chip morphology. The effects on hole quality and surface roughness are also presented.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Vibration-assisted drilling</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Low-frequency vibration-assisted drilling</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">CFRP/Ti6Al4V</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Stacked material</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Advanced machining</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Sadek, A.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Elbestawi, M. A.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Attia, M.H.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">The international journal of advanced manufacturing technology</subfield><subfield code="d">Springer London, 1985</subfield><subfield code="g">98(2018), 9-12 vom: 25. Juli, Seite 2801-2817</subfield><subfield code="w">(DE-627)129185299</subfield><subfield code="w">(DE-600)52651-4</subfield><subfield code="w">(DE-576)014456192</subfield><subfield code="x">0268-3768</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:98</subfield><subfield code="g">year:2018</subfield><subfield code="g">number:9-12</subfield><subfield code="g">day:25</subfield><subfield code="g">month:07</subfield><subfield code="g">pages:2801-2817</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">https://doi.org/10.1007/s00170-018-2410-2</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-TEC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2018</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2333</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">98</subfield><subfield code="j">2018</subfield><subfield code="e">9-12</subfield><subfield code="b">25</subfield><subfield code="c">07</subfield><subfield code="h">2801-2817</subfield></datafield></record></collection>
|
| score |
7.400717 |