Investigation of process parameters for stable micro dry wire electrical discharge machining
Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smoo...
Ausführliche Beschreibung
Gespeichert in:
| Autor*in: |
Banu, Asfana [verfasserIn] |
|---|
| Format: |
Artikel |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
2019 |
|---|
| Schlagwörter: |
|---|
| Anmerkung: |
© Springer-Verlag London Ltd., part of Springer Nature 2019 |
|---|
| Übergeordnetes Werk: |
Enthalten in: The international journal of advanced manufacturing technology - Springer London, 1985, 103(2019), 1-4 vom: 25. März, Seite 723-741 |
|---|---|
| Übergeordnetes Werk: |
volume:103 ; year:2019 ; number:1-4 ; day:25 ; month:03 ; pages:723-741 |
| Links: |
|---|
| DOI / URN: |
10.1007/s00170-019-03603-7 |
|---|
| Katalog-ID: |
OLC2026138192 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | OLC2026138192 | ||
| 003 | DE-627 | ||
| 005 | 20230323142056.0 | ||
| 007 | tu | ||
| 008 | 200820s2019 xx ||||| 00| ||eng c | ||
| 024 | 7 | |a 10.1007/s00170-019-03603-7 |2 doi | |
| 035 | |a (DE-627)OLC2026138192 | ||
| 035 | |a (DE-He213)s00170-019-03603-7-p | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 082 | 0 | 4 | |a 670 |q VZ |
| 100 | 1 | |a Banu, Asfana |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Investigation of process parameters for stable micro dry wire electrical discharge machining |
| 264 | 1 | |c 2019 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ohne Hilfsmittel zu benutzen |b n |2 rdamedia | ||
| 338 | |a Band |b nc |2 rdacarrier | ||
| 500 | |a © Springer-Verlag London Ltd., part of Springer Nature 2019 | ||
| 520 | |a Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. | ||
| 650 | 4 | |a Dry EDM | |
| 650 | 4 | |a DEDM | |
| 650 | 4 | |a Dry WEDM | |
| 650 | 4 | |a DWEDM | |
| 650 | 4 | |a Micro dry wire EDM | |
| 650 | 4 | |a μDWEDM | |
| 700 | 1 | |a Ali, Mohammad Yeakub |4 aut | |
| 700 | 1 | |a Rahman, Mohamed Abdul |4 aut | |
| 700 | 1 | |a Konneh, Mohamed |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t The international journal of advanced manufacturing technology |d Springer London, 1985 |g 103(2019), 1-4 vom: 25. März, Seite 723-741 |w (DE-627)129185299 |w (DE-600)52651-4 |w (DE-576)014456192 |x 0268-3768 |7 nnns |
| 773 | 1 | 8 | |g volume:103 |g year:2019 |g number:1-4 |g day:25 |g month:03 |g pages:723-741 |
| 856 | 4 | 1 | |u https://doi.org/10.1007/s00170-019-03603-7 |z lizenzpflichtig |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a SYSFLAG_A | ||
| 912 | |a GBV_OLC | ||
| 912 | |a SSG-OLC-TEC | ||
| 912 | |a GBV_ILN_70 | ||
| 912 | |a GBV_ILN_2018 | ||
| 912 | |a GBV_ILN_2333 | ||
| 951 | |a AR | ||
| 952 | |d 103 |j 2019 |e 1-4 |b 25 |c 03 |h 723-741 | ||
| author_variant |
a b ab m y a my mya m a r ma mar m k mk |
|---|---|
| matchkey_str |
article:02683768:2019----::netgtoopoesaaeesosalmcorwreeti |
| hierarchy_sort_str |
2019 |
| publishDate |
2019 |
| allfields |
10.1007/s00170-019-03603-7 doi (DE-627)OLC2026138192 (DE-He213)s00170-019-03603-7-p DE-627 ger DE-627 rakwb eng 670 VZ Banu, Asfana verfasserin aut Investigation of process parameters for stable micro dry wire electrical discharge machining 2019 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2019 Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. Dry EDM DEDM Dry WEDM DWEDM Micro dry wire EDM μDWEDM Ali, Mohammad Yeakub aut Rahman, Mohamed Abdul aut Konneh, Mohamed aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 103(2019), 1-4 vom: 25. März, Seite 723-741 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:103 year:2019 number:1-4 day:25 month:03 pages:723-741 https://doi.org/10.1007/s00170-019-03603-7 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 103 2019 1-4 25 03 723-741 |
| spelling |
10.1007/s00170-019-03603-7 doi (DE-627)OLC2026138192 (DE-He213)s00170-019-03603-7-p DE-627 ger DE-627 rakwb eng 670 VZ Banu, Asfana verfasserin aut Investigation of process parameters for stable micro dry wire electrical discharge machining 2019 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2019 Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. Dry EDM DEDM Dry WEDM DWEDM Micro dry wire EDM μDWEDM Ali, Mohammad Yeakub aut Rahman, Mohamed Abdul aut Konneh, Mohamed aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 103(2019), 1-4 vom: 25. März, Seite 723-741 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:103 year:2019 number:1-4 day:25 month:03 pages:723-741 https://doi.org/10.1007/s00170-019-03603-7 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 103 2019 1-4 25 03 723-741 |
| allfields_unstemmed |
10.1007/s00170-019-03603-7 doi (DE-627)OLC2026138192 (DE-He213)s00170-019-03603-7-p DE-627 ger DE-627 rakwb eng 670 VZ Banu, Asfana verfasserin aut Investigation of process parameters for stable micro dry wire electrical discharge machining 2019 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2019 Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. Dry EDM DEDM Dry WEDM DWEDM Micro dry wire EDM μDWEDM Ali, Mohammad Yeakub aut Rahman, Mohamed Abdul aut Konneh, Mohamed aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 103(2019), 1-4 vom: 25. März, Seite 723-741 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:103 year:2019 number:1-4 day:25 month:03 pages:723-741 https://doi.org/10.1007/s00170-019-03603-7 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 103 2019 1-4 25 03 723-741 |
| allfieldsGer |
10.1007/s00170-019-03603-7 doi (DE-627)OLC2026138192 (DE-He213)s00170-019-03603-7-p DE-627 ger DE-627 rakwb eng 670 VZ Banu, Asfana verfasserin aut Investigation of process parameters for stable micro dry wire electrical discharge machining 2019 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2019 Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. Dry EDM DEDM Dry WEDM DWEDM Micro dry wire EDM μDWEDM Ali, Mohammad Yeakub aut Rahman, Mohamed Abdul aut Konneh, Mohamed aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 103(2019), 1-4 vom: 25. März, Seite 723-741 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:103 year:2019 number:1-4 day:25 month:03 pages:723-741 https://doi.org/10.1007/s00170-019-03603-7 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 103 2019 1-4 25 03 723-741 |
| allfieldsSound |
10.1007/s00170-019-03603-7 doi (DE-627)OLC2026138192 (DE-He213)s00170-019-03603-7-p DE-627 ger DE-627 rakwb eng 670 VZ Banu, Asfana verfasserin aut Investigation of process parameters for stable micro dry wire electrical discharge machining 2019 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Springer-Verlag London Ltd., part of Springer Nature 2019 Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. Dry EDM DEDM Dry WEDM DWEDM Micro dry wire EDM μDWEDM Ali, Mohammad Yeakub aut Rahman, Mohamed Abdul aut Konneh, Mohamed aut Enthalten in The international journal of advanced manufacturing technology Springer London, 1985 103(2019), 1-4 vom: 25. März, Seite 723-741 (DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 0268-3768 nnns volume:103 year:2019 number:1-4 day:25 month:03 pages:723-741 https://doi.org/10.1007/s00170-019-03603-7 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 AR 103 2019 1-4 25 03 723-741 |
| language |
English |
| source |
Enthalten in The international journal of advanced manufacturing technology 103(2019), 1-4 vom: 25. März, Seite 723-741 volume:103 year:2019 number:1-4 day:25 month:03 pages:723-741 |
| sourceStr |
Enthalten in The international journal of advanced manufacturing technology 103(2019), 1-4 vom: 25. März, Seite 723-741 volume:103 year:2019 number:1-4 day:25 month:03 pages:723-741 |
| format_phy_str_mv |
Article |
| institution |
findex.gbv.de |
| topic_facet |
Dry EDM DEDM Dry WEDM DWEDM Micro dry wire EDM μDWEDM |
| dewey-raw |
670 |
| isfreeaccess_bool |
false |
| container_title |
The international journal of advanced manufacturing technology |
| authorswithroles_txt_mv |
Banu, Asfana @@aut@@ Ali, Mohammad Yeakub @@aut@@ Rahman, Mohamed Abdul @@aut@@ Konneh, Mohamed @@aut@@ |
| publishDateDaySort_date |
2019-03-25T00:00:00Z |
| hierarchy_top_id |
129185299 |
| dewey-sort |
3670 |
| id |
OLC2026138192 |
| language_de |
englisch |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">OLC2026138192</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230323142056.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">200820s2019 xx ||||| 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/s00170-019-03603-7</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC2026138192</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-He213)s00170-019-03603-7-p</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">670</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Banu, Asfana</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Investigation of process parameters for stable micro dry wire electrical discharge machining</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2019</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">© Springer-Verlag London Ltd., part of Springer Nature 2019</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Dry EDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">DEDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Dry WEDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">DWEDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Micro dry wire EDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">μDWEDM</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Ali, Mohammad Yeakub</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Rahman, Mohamed Abdul</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Konneh, Mohamed</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">The international journal of advanced manufacturing technology</subfield><subfield code="d">Springer London, 1985</subfield><subfield code="g">103(2019), 1-4 vom: 25. März, Seite 723-741</subfield><subfield code="w">(DE-627)129185299</subfield><subfield code="w">(DE-600)52651-4</subfield><subfield code="w">(DE-576)014456192</subfield><subfield code="x">0268-3768</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:103</subfield><subfield code="g">year:2019</subfield><subfield code="g">number:1-4</subfield><subfield code="g">day:25</subfield><subfield code="g">month:03</subfield><subfield code="g">pages:723-741</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">https://doi.org/10.1007/s00170-019-03603-7</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-TEC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2018</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2333</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">103</subfield><subfield code="j">2019</subfield><subfield code="e">1-4</subfield><subfield code="b">25</subfield><subfield code="c">03</subfield><subfield code="h">723-741</subfield></datafield></record></collection>
|
| author |
Banu, Asfana |
| spellingShingle |
Banu, Asfana ddc 670 misc Dry EDM misc DEDM misc Dry WEDM misc DWEDM misc Micro dry wire EDM misc μDWEDM Investigation of process parameters for stable micro dry wire electrical discharge machining |
| authorStr |
Banu, Asfana |
| ppnlink_with_tag_str_mv |
@@773@@(DE-627)129185299 |
| format |
Article |
| dewey-ones |
670 - Manufacturing |
| delete_txt_mv |
keep |
| author_role |
aut aut aut aut |
| collection |
OLC |
| remote_str |
false |
| illustrated |
Not Illustrated |
| issn |
0268-3768 |
| topic_title |
670 VZ Investigation of process parameters for stable micro dry wire electrical discharge machining Dry EDM DEDM Dry WEDM DWEDM Micro dry wire EDM μDWEDM |
| topic |
ddc 670 misc Dry EDM misc DEDM misc Dry WEDM misc DWEDM misc Micro dry wire EDM misc μDWEDM |
| topic_unstemmed |
ddc 670 misc Dry EDM misc DEDM misc Dry WEDM misc DWEDM misc Micro dry wire EDM misc μDWEDM |
| topic_browse |
ddc 670 misc Dry EDM misc DEDM misc Dry WEDM misc DWEDM misc Micro dry wire EDM misc μDWEDM |
| format_facet |
Aufsätze Gedruckte Aufsätze |
| format_main_str_mv |
Text Zeitschrift/Artikel |
| carriertype_str_mv |
nc |
| hierarchy_parent_title |
The international journal of advanced manufacturing technology |
| hierarchy_parent_id |
129185299 |
| dewey-tens |
670 - Manufacturing |
| hierarchy_top_title |
The international journal of advanced manufacturing technology |
| isfreeaccess_txt |
false |
| familylinks_str_mv |
(DE-627)129185299 (DE-600)52651-4 (DE-576)014456192 |
| title |
Investigation of process parameters for stable micro dry wire electrical discharge machining |
| ctrlnum |
(DE-627)OLC2026138192 (DE-He213)s00170-019-03603-7-p |
| title_full |
Investigation of process parameters for stable micro dry wire electrical discharge machining |
| author_sort |
Banu, Asfana |
| journal |
The international journal of advanced manufacturing technology |
| journalStr |
The international journal of advanced manufacturing technology |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology |
| recordtype |
marc |
| publishDateSort |
2019 |
| contenttype_str_mv |
txt |
| container_start_page |
723 |
| author_browse |
Banu, Asfana Ali, Mohammad Yeakub Rahman, Mohamed Abdul Konneh, Mohamed |
| container_volume |
103 |
| class |
670 VZ |
| format_se |
Aufsätze |
| author-letter |
Banu, Asfana |
| doi_str_mv |
10.1007/s00170-019-03603-7 |
| dewey-full |
670 |
| title_sort |
investigation of process parameters for stable micro dry wire electrical discharge machining |
| title_auth |
Investigation of process parameters for stable micro dry wire electrical discharge machining |
| abstract |
Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. © Springer-Verlag London Ltd., part of Springer Nature 2019 |
| abstractGer |
Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. © Springer-Verlag London Ltd., part of Springer Nature 2019 |
| abstract_unstemmed |
Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed. © Springer-Verlag London Ltd., part of Springer Nature 2019 |
| collection_details |
GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_70 GBV_ILN_2018 GBV_ILN_2333 |
| container_issue |
1-4 |
| title_short |
Investigation of process parameters for stable micro dry wire electrical discharge machining |
| url |
https://doi.org/10.1007/s00170-019-03603-7 |
| remote_bool |
false |
| author2 |
Ali, Mohammad Yeakub Rahman, Mohamed Abdul Konneh, Mohamed |
| author2Str |
Ali, Mohammad Yeakub Rahman, Mohamed Abdul Konneh, Mohamed |
| ppnlink |
129185299 |
| mediatype_str_mv |
n |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| doi_str |
10.1007/s00170-019-03603-7 |
| up_date |
2024-07-04T03:12:26.216Z |
| _version_ |
1803616514192965632 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">OLC2026138192</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230323142056.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">200820s2019 xx ||||| 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/s00170-019-03603-7</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC2026138192</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-He213)s00170-019-03603-7-p</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">670</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Banu, Asfana</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Investigation of process parameters for stable micro dry wire electrical discharge machining</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2019</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">© Springer-Verlag London Ltd., part of Springer Nature 2019</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract Micro dry wire electrical discharge machining (μDWEDM) is a process where gas is used as the dielectric fluid instead of a liquid. In this process, certain modifications of wire electrical discharge machining (WEDM) are needed during the machining operation to achieve stable machining. Smooth and stable machining operation in μDWEDM process remains as a critical issue. Thus, this paper presents the investigation of process parameters for a stable μDWEDM process. The investigation was performed on a stainless steel (SS304) with a tungsten wire as the electrode using integrated multi-process machine tool, DT 110 (Mikrotools Inc., Singapore). The experimentation method used in this phase was a conventional experimental method, one-factor-at-a-time (OFAT). Types of dielectric fluid, dielectric fluid pressure, polarity, threshold, wire tension, wire feed rate, wire speed, gap voltage, and capacitance were the controlled parameters. The machined microchannels were observed using scanning electron microscope (SEM). Stable and smooth machining operation of μDWEDM was found to be with compressed air as the dielectric fluid, workpiece positive polarity, 24% threshold, 0.0809 N wire tension, 0.2 μm/s wire feed rate, and 0.6 rpm wire speed.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Dry EDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">DEDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Dry WEDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">DWEDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Micro dry wire EDM</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">μDWEDM</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Ali, Mohammad Yeakub</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Rahman, Mohamed Abdul</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Konneh, Mohamed</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">The international journal of advanced manufacturing technology</subfield><subfield code="d">Springer London, 1985</subfield><subfield code="g">103(2019), 1-4 vom: 25. März, Seite 723-741</subfield><subfield code="w">(DE-627)129185299</subfield><subfield code="w">(DE-600)52651-4</subfield><subfield code="w">(DE-576)014456192</subfield><subfield code="x">0268-3768</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:103</subfield><subfield code="g">year:2019</subfield><subfield code="g">number:1-4</subfield><subfield code="g">day:25</subfield><subfield code="g">month:03</subfield><subfield code="g">pages:723-741</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">https://doi.org/10.1007/s00170-019-03603-7</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-TEC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2018</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2333</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">103</subfield><subfield code="j">2019</subfield><subfield code="e">1-4</subfield><subfield code="b">25</subfield><subfield code="c">03</subfield><subfield code="h">723-741</subfield></datafield></record></collection>
|
| score |
7.4012985 |