Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion
Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deforma...
Ausführliche Beschreibung
Autor*in: |
Zhou, J. [verfasserIn] |
---|
Format: |
Artikel |
---|---|
Sprache: |
Englisch |
Erschienen: |
1992 |
---|
Schlagwörter: |
---|
Anmerkung: |
© Chapman & Hall 1992 |
---|
Übergeordnetes Werk: |
Enthalten in: Journal of materials science - Kluwer Academic Publishers, 1966, 27(1992), 15 vom: Aug., Seite 4247-4260 |
---|---|
Übergeordnetes Werk: |
volume:27 ; year:1992 ; number:15 ; month:08 ; pages:4247-4260 |
Links: |
---|
DOI / URN: |
10.1007/BF01105135 |
---|
Katalog-ID: |
OLC2046190971 |
---|
LEADER | 01000caa a22002652 4500 | ||
---|---|---|---|
001 | OLC2046190971 | ||
003 | DE-627 | ||
005 | 20230503122226.0 | ||
007 | tu | ||
008 | 200820s1992 xx ||||| 00| ||eng c | ||
024 | 7 | |a 10.1007/BF01105135 |2 doi | |
035 | |a (DE-627)OLC2046190971 | ||
035 | |a (DE-He213)BF01105135-p | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
082 | 0 | 4 | |a 670 |q VZ |
100 | 1 | |a Zhou, J. |e verfasserin |4 aut | |
245 | 1 | 0 | |a Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion |
264 | 1 | |c 1992 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ohne Hilfsmittel zu benutzen |b n |2 rdamedia | ||
338 | |a Band |b nc |2 rdacarrier | ||
500 | |a © Chapman & Hall 1992 | ||
520 | |a Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. | ||
650 | 4 | |a Recrystallization | |
650 | 4 | |a Ductility | |
650 | 4 | |a High Strain Rate | |
650 | 4 | |a Dynamic Recrystallization | |
650 | 4 | |a Strain Rate Sensitivity | |
700 | 1 | |a Duszczyk, J. |4 aut | |
700 | 1 | |a Korevaar, B. M. |4 aut | |
700 | 1 | |a Verlinden, B. |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Journal of materials science |d Kluwer Academic Publishers, 1966 |g 27(1992), 15 vom: Aug., Seite 4247-4260 |w (DE-627)129546372 |w (DE-600)218324-9 |w (DE-576)014996774 |x 0022-2461 |7 nnns |
773 | 1 | 8 | |g volume:27 |g year:1992 |g number:15 |g month:08 |g pages:4247-4260 |
856 | 4 | 1 | |u https://doi.org/10.1007/BF01105135 |z lizenzpflichtig |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a SYSFLAG_A | ||
912 | |a GBV_OLC | ||
912 | |a SSG-OLC-TEC | ||
912 | |a GBV_ILN_11 | ||
912 | |a GBV_ILN_20 | ||
912 | |a GBV_ILN_23 | ||
912 | |a GBV_ILN_30 | ||
912 | |a GBV_ILN_32 | ||
912 | |a GBV_ILN_40 | ||
912 | |a GBV_ILN_62 | ||
912 | |a GBV_ILN_65 | ||
912 | |a GBV_ILN_70 | ||
912 | |a GBV_ILN_2004 | ||
912 | |a GBV_ILN_2006 | ||
912 | |a GBV_ILN_2015 | ||
912 | |a GBV_ILN_2020 | ||
912 | |a GBV_ILN_2021 | ||
912 | |a GBV_ILN_4082 | ||
912 | |a GBV_ILN_4305 | ||
912 | |a GBV_ILN_4306 | ||
912 | |a GBV_ILN_4316 | ||
912 | |a GBV_ILN_4319 | ||
912 | |a GBV_ILN_4323 | ||
912 | |a GBV_ILN_4700 | ||
951 | |a AR | ||
952 | |d 27 |j 1992 |e 15 |c 08 |h 4247-4260 |
author_variant |
j z jz j d jd b m k bm bmk b v bv |
---|---|
matchkey_str |
article:00222461:1992----::hrceiainfhhtoknbhvorfpa2s7n3 |
hierarchy_sort_str |
1992 |
publishDate |
1992 |
allfields |
10.1007/BF01105135 doi (DE-627)OLC2046190971 (DE-He213)BF01105135-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, J. verfasserin aut Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion 1992 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Chapman & Hall 1992 Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. Recrystallization Ductility High Strain Rate Dynamic Recrystallization Strain Rate Sensitivity Duszczyk, J. aut Korevaar, B. M. aut Verlinden, B. aut Enthalten in Journal of materials science Kluwer Academic Publishers, 1966 27(1992), 15 vom: Aug., Seite 4247-4260 (DE-627)129546372 (DE-600)218324-9 (DE-576)014996774 0022-2461 nnns volume:27 year:1992 number:15 month:08 pages:4247-4260 https://doi.org/10.1007/BF01105135 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_11 GBV_ILN_20 GBV_ILN_23 GBV_ILN_30 GBV_ILN_32 GBV_ILN_40 GBV_ILN_62 GBV_ILN_65 GBV_ILN_70 GBV_ILN_2004 GBV_ILN_2006 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_4082 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4316 GBV_ILN_4319 GBV_ILN_4323 GBV_ILN_4700 AR 27 1992 15 08 4247-4260 |
spelling |
10.1007/BF01105135 doi (DE-627)OLC2046190971 (DE-He213)BF01105135-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, J. verfasserin aut Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion 1992 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Chapman & Hall 1992 Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. Recrystallization Ductility High Strain Rate Dynamic Recrystallization Strain Rate Sensitivity Duszczyk, J. aut Korevaar, B. M. aut Verlinden, B. aut Enthalten in Journal of materials science Kluwer Academic Publishers, 1966 27(1992), 15 vom: Aug., Seite 4247-4260 (DE-627)129546372 (DE-600)218324-9 (DE-576)014996774 0022-2461 nnns volume:27 year:1992 number:15 month:08 pages:4247-4260 https://doi.org/10.1007/BF01105135 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_11 GBV_ILN_20 GBV_ILN_23 GBV_ILN_30 GBV_ILN_32 GBV_ILN_40 GBV_ILN_62 GBV_ILN_65 GBV_ILN_70 GBV_ILN_2004 GBV_ILN_2006 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_4082 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4316 GBV_ILN_4319 GBV_ILN_4323 GBV_ILN_4700 AR 27 1992 15 08 4247-4260 |
allfields_unstemmed |
10.1007/BF01105135 doi (DE-627)OLC2046190971 (DE-He213)BF01105135-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, J. verfasserin aut Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion 1992 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Chapman & Hall 1992 Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. Recrystallization Ductility High Strain Rate Dynamic Recrystallization Strain Rate Sensitivity Duszczyk, J. aut Korevaar, B. M. aut Verlinden, B. aut Enthalten in Journal of materials science Kluwer Academic Publishers, 1966 27(1992), 15 vom: Aug., Seite 4247-4260 (DE-627)129546372 (DE-600)218324-9 (DE-576)014996774 0022-2461 nnns volume:27 year:1992 number:15 month:08 pages:4247-4260 https://doi.org/10.1007/BF01105135 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_11 GBV_ILN_20 GBV_ILN_23 GBV_ILN_30 GBV_ILN_32 GBV_ILN_40 GBV_ILN_62 GBV_ILN_65 GBV_ILN_70 GBV_ILN_2004 GBV_ILN_2006 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_4082 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4316 GBV_ILN_4319 GBV_ILN_4323 GBV_ILN_4700 AR 27 1992 15 08 4247-4260 |
allfieldsGer |
10.1007/BF01105135 doi (DE-627)OLC2046190971 (DE-He213)BF01105135-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, J. verfasserin aut Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion 1992 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Chapman & Hall 1992 Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. Recrystallization Ductility High Strain Rate Dynamic Recrystallization Strain Rate Sensitivity Duszczyk, J. aut Korevaar, B. M. aut Verlinden, B. aut Enthalten in Journal of materials science Kluwer Academic Publishers, 1966 27(1992), 15 vom: Aug., Seite 4247-4260 (DE-627)129546372 (DE-600)218324-9 (DE-576)014996774 0022-2461 nnns volume:27 year:1992 number:15 month:08 pages:4247-4260 https://doi.org/10.1007/BF01105135 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_11 GBV_ILN_20 GBV_ILN_23 GBV_ILN_30 GBV_ILN_32 GBV_ILN_40 GBV_ILN_62 GBV_ILN_65 GBV_ILN_70 GBV_ILN_2004 GBV_ILN_2006 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_4082 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4316 GBV_ILN_4319 GBV_ILN_4323 GBV_ILN_4700 AR 27 1992 15 08 4247-4260 |
allfieldsSound |
10.1007/BF01105135 doi (DE-627)OLC2046190971 (DE-He213)BF01105135-p DE-627 ger DE-627 rakwb eng 670 VZ Zhou, J. verfasserin aut Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion 1992 Text txt rdacontent ohne Hilfsmittel zu benutzen n rdamedia Band nc rdacarrier © Chapman & Hall 1992 Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. Recrystallization Ductility High Strain Rate Dynamic Recrystallization Strain Rate Sensitivity Duszczyk, J. aut Korevaar, B. M. aut Verlinden, B. aut Enthalten in Journal of materials science Kluwer Academic Publishers, 1966 27(1992), 15 vom: Aug., Seite 4247-4260 (DE-627)129546372 (DE-600)218324-9 (DE-576)014996774 0022-2461 nnns volume:27 year:1992 number:15 month:08 pages:4247-4260 https://doi.org/10.1007/BF01105135 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_11 GBV_ILN_20 GBV_ILN_23 GBV_ILN_30 GBV_ILN_32 GBV_ILN_40 GBV_ILN_62 GBV_ILN_65 GBV_ILN_70 GBV_ILN_2004 GBV_ILN_2006 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_4082 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4316 GBV_ILN_4319 GBV_ILN_4323 GBV_ILN_4700 AR 27 1992 15 08 4247-4260 |
language |
English |
source |
Enthalten in Journal of materials science 27(1992), 15 vom: Aug., Seite 4247-4260 volume:27 year:1992 number:15 month:08 pages:4247-4260 |
sourceStr |
Enthalten in Journal of materials science 27(1992), 15 vom: Aug., Seite 4247-4260 volume:27 year:1992 number:15 month:08 pages:4247-4260 |
format_phy_str_mv |
Article |
institution |
findex.gbv.de |
topic_facet |
Recrystallization Ductility High Strain Rate Dynamic Recrystallization Strain Rate Sensitivity |
dewey-raw |
670 |
isfreeaccess_bool |
false |
container_title |
Journal of materials science |
authorswithroles_txt_mv |
Zhou, J. @@aut@@ Duszczyk, J. @@aut@@ Korevaar, B. M. @@aut@@ Verlinden, B. @@aut@@ |
publishDateDaySort_date |
1992-08-01T00:00:00Z |
hierarchy_top_id |
129546372 |
dewey-sort |
3670 |
id |
OLC2046190971 |
language_de |
englisch |
fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">OLC2046190971</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230503122226.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">200820s1992 xx ||||| 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/BF01105135</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC2046190971</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-He213)BF01105135-p</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">670</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Zhou, J.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">1992</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">© Chapman & Hall 1992</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Recrystallization</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Ductility</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">High Strain Rate</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Dynamic Recrystallization</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Strain Rate Sensitivity</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Duszczyk, J.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Korevaar, B. M.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Verlinden, B.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">Journal of materials science</subfield><subfield code="d">Kluwer Academic Publishers, 1966</subfield><subfield code="g">27(1992), 15 vom: Aug., Seite 4247-4260</subfield><subfield code="w">(DE-627)129546372</subfield><subfield code="w">(DE-600)218324-9</subfield><subfield code="w">(DE-576)014996774</subfield><subfield code="x">0022-2461</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:27</subfield><subfield code="g">year:1992</subfield><subfield code="g">number:15</subfield><subfield code="g">month:08</subfield><subfield code="g">pages:4247-4260</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">https://doi.org/10.1007/BF01105135</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-TEC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_11</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_30</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_32</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2004</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2006</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2015</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4082</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4316</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4319</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">27</subfield><subfield code="j">1992</subfield><subfield code="e">15</subfield><subfield code="c">08</subfield><subfield code="h">4247-4260</subfield></datafield></record></collection>
|
author |
Zhou, J. |
spellingShingle |
Zhou, J. ddc 670 misc Recrystallization misc Ductility misc High Strain Rate misc Dynamic Recrystallization misc Strain Rate Sensitivity Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion |
authorStr |
Zhou, J. |
ppnlink_with_tag_str_mv |
@@773@@(DE-627)129546372 |
format |
Article |
dewey-ones |
670 - Manufacturing |
delete_txt_mv |
keep |
author_role |
aut aut aut aut |
collection |
OLC |
remote_str |
false |
illustrated |
Not Illustrated |
issn |
0022-2461 |
topic_title |
670 VZ Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion Recrystallization Ductility High Strain Rate Dynamic Recrystallization Strain Rate Sensitivity |
topic |
ddc 670 misc Recrystallization misc Ductility misc High Strain Rate misc Dynamic Recrystallization misc Strain Rate Sensitivity |
topic_unstemmed |
ddc 670 misc Recrystallization misc Ductility misc High Strain Rate misc Dynamic Recrystallization misc Strain Rate Sensitivity |
topic_browse |
ddc 670 misc Recrystallization misc Ductility misc High Strain Rate misc Dynamic Recrystallization misc Strain Rate Sensitivity |
format_facet |
Aufsätze Gedruckte Aufsätze |
format_main_str_mv |
Text Zeitschrift/Artikel |
carriertype_str_mv |
nc |
hierarchy_parent_title |
Journal of materials science |
hierarchy_parent_id |
129546372 |
dewey-tens |
670 - Manufacturing |
hierarchy_top_title |
Journal of materials science |
isfreeaccess_txt |
false |
familylinks_str_mv |
(DE-627)129546372 (DE-600)218324-9 (DE-576)014996774 |
title |
Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion |
ctrlnum |
(DE-627)OLC2046190971 (DE-He213)BF01105135-p |
title_full |
Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion |
author_sort |
Zhou, J. |
journal |
Journal of materials science |
journalStr |
Journal of materials science |
lang_code |
eng |
isOA_bool |
false |
dewey-hundreds |
600 - Technology |
recordtype |
marc |
publishDateSort |
1992 |
contenttype_str_mv |
txt |
container_start_page |
4247 |
author_browse |
Zhou, J. Duszczyk, J. Korevaar, B. M. Verlinden, B. |
container_volume |
27 |
class |
670 VZ |
format_se |
Aufsätze |
author-letter |
Zhou, J. |
doi_str_mv |
10.1007/BF01105135 |
dewey-full |
670 |
title_sort |
characterization of the hot-working behaviour of a p/m al-20si-7.5ni-3cu-1mg alloy by hot torsion |
title_auth |
Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion |
abstract |
Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. © Chapman & Hall 1992 |
abstractGer |
Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. © Chapman & Hall 1992 |
abstract_unstemmed |
Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys. © Chapman & Hall 1992 |
collection_details |
GBV_USEFLAG_A SYSFLAG_A GBV_OLC SSG-OLC-TEC GBV_ILN_11 GBV_ILN_20 GBV_ILN_23 GBV_ILN_30 GBV_ILN_32 GBV_ILN_40 GBV_ILN_62 GBV_ILN_65 GBV_ILN_70 GBV_ILN_2004 GBV_ILN_2006 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_4082 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4316 GBV_ILN_4319 GBV_ILN_4323 GBV_ILN_4700 |
container_issue |
15 |
title_short |
Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion |
url |
https://doi.org/10.1007/BF01105135 |
remote_bool |
false |
author2 |
Duszczyk, J. Korevaar, B. M. Verlinden, B. |
author2Str |
Duszczyk, J. Korevaar, B. M. Verlinden, B. |
ppnlink |
129546372 |
mediatype_str_mv |
n |
isOA_txt |
false |
hochschulschrift_bool |
false |
doi_str |
10.1007/BF01105135 |
up_date |
2024-07-04T04:28:07.850Z |
_version_ |
1803621276425650176 |
fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">OLC2046190971</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230503122226.0</controlfield><controlfield tag="007">tu</controlfield><controlfield tag="008">200820s1992 xx ||||| 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/BF01105135</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)OLC2046190971</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-He213)BF01105135-p</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">670</subfield><subfield code="q">VZ</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Zhou, J.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Characterization of the hot-working behaviour of a P/M Al-20Si-7.5Ni-3Cu-1Mg alloy by hot torsion</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">1992</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">ohne Hilfsmittel zu benutzen</subfield><subfield code="b">n</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Band</subfield><subfield code="b">nc</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="500" ind1=" " ind2=" "><subfield code="a">© Chapman & Hall 1992</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract Hot torsion tests were performed to investigate the mechanical and microstructural responses of a quinary Al-20Si-7.5 Ni-3Cu-1Mg (wt %) alloy, consolidated from a rapidly solidified powder, to deformation at varying temperatures and strain rates. It was found that, under most of the deformation conditions applied, stress-strain curves were characterized by distinct stress peaks, which are usually absent from the curves shown by conventional aluminium alloys. Temperature and strain rate strongly influenced the stress and ductility of the material. Their combined influence on the peak stress has been expressed with a hyperbolic sine equation. The material also exhibited an extraordinarily high strain rate sensitivity,m, and a largem value variation with temperature. A relatively high value of activation energy for deformation was determined, which clearly reflects additional thermal barriers to metal flow, arising from a high volume fraction of multi-phase particles dispersed in the material. Additionally, the microstructure developed in the course of deformation was examined, which showed evidence of the co-operation of dynamic recovery and recrystallization. The initiation of local dynamic recrystallization is a result of a low level of dynamic recovery achievable in the material, which is again different from conventional aluminium alloys.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Recrystallization</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Ductility</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">High Strain Rate</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Dynamic Recrystallization</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Strain Rate Sensitivity</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Duszczyk, J.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Korevaar, B. M.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Verlinden, B.</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">Journal of materials science</subfield><subfield code="d">Kluwer Academic Publishers, 1966</subfield><subfield code="g">27(1992), 15 vom: Aug., Seite 4247-4260</subfield><subfield code="w">(DE-627)129546372</subfield><subfield code="w">(DE-600)218324-9</subfield><subfield code="w">(DE-576)014996774</subfield><subfield code="x">0022-2461</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:27</subfield><subfield code="g">year:1992</subfield><subfield code="g">number:15</subfield><subfield code="g">month:08</subfield><subfield code="g">pages:4247-4260</subfield></datafield><datafield tag="856" ind1="4" ind2="1"><subfield code="u">https://doi.org/10.1007/BF01105135</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_OLC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-TEC</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_11</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_30</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_32</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2004</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2006</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2015</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4082</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4316</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4319</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">27</subfield><subfield code="j">1992</subfield><subfield code="e">15</subfield><subfield code="c">08</subfield><subfield code="h">4247-4260</subfield></datafield></record></collection>
|
score |
7.4018707 |