Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process
Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ult...
Ausführliche Beschreibung
Gespeichert in:
| Autor*in: |
Krishnaiah, A. [verfasserIn] Chakkingal, U. [verfasserIn] Kim, H. S. [verfasserIn] |
|---|
| Format: |
E-Artikel |
|---|---|
| Sprache: |
Englisch |
| Erschienen: |
2008 |
|---|
| Schlagwörter: |
|---|
| Übergeordnetes Werk: |
Enthalten in: Transactions of the Indian Institute of Metals - [New Delhi] : Springer India, 2008, 61(2008), 2-3 vom: Apr., Seite 165-167 |
|---|---|
| Übergeordnetes Werk: |
volume:61 ; year:2008 ; number:2-3 ; month:04 ; pages:165-167 |
| Links: |
|---|
| DOI / URN: |
10.1007/s12666-008-0032-3 |
|---|
| Katalog-ID: |
SPR026759543 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | SPR026759543 | ||
| 003 | DE-627 | ||
| 005 | 20230519190210.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 201007s2008 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1007/s12666-008-0032-3 |2 doi | |
| 035 | |a (DE-627)SPR026759543 | ||
| 035 | |a (SPR)s12666-008-0032-3-e | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 082 | 0 | 4 | |a 620 |a 660 |a 670 |q ASE |
| 100 | 1 | |a Krishnaiah, A. |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process |
| 264 | 1 | |c 2008 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a Computermedien |b c |2 rdamedia | ||
| 338 | |a Online-Ressource |b cr |2 rdacarrier | ||
| 520 | |a Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. | ||
| 650 | 4 | |a Ultimate Tensile Strength |7 (dpeaa)DE-He213 | |
| 650 | 4 | |a Severe Plastic Deformation |7 (dpeaa)DE-He213 | |
| 650 | 4 | |a Accumulative Roll Bonding |7 (dpeaa)DE-He213 | |
| 650 | 4 | |a High Pressure Torsion |7 (dpeaa)DE-He213 | |
| 650 | 4 | |a Equal Channel Angular Extrusion |7 (dpeaa)DE-He213 | |
| 700 | 1 | |a Chakkingal, U. |e verfasserin |4 aut | |
| 700 | 1 | |a Kim, H. S. |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Transactions of the Indian Institute of Metals |d [New Delhi] : Springer India, 2008 |g 61(2008), 2-3 vom: Apr., Seite 165-167 |w (DE-627)617807884 |w (DE-600)2535335-4 |x 0975-1645 |7 nnns |
| 773 | 1 | 8 | |g volume:61 |g year:2008 |g number:2-3 |g month:04 |g pages:165-167 |
| 856 | 4 | 0 | |u https://dx.doi.org/10.1007/s12666-008-0032-3 |z lizenzpflichtig |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a SYSFLAG_A | ||
| 912 | |a GBV_SPRINGER | ||
| 912 | |a SSG-OLC-PHA | ||
| 912 | |a GBV_ILN_11 | ||
| 912 | |a GBV_ILN_20 | ||
| 912 | |a GBV_ILN_22 | ||
| 912 | |a GBV_ILN_23 | ||
| 912 | |a GBV_ILN_24 | ||
| 912 | |a GBV_ILN_31 | ||
| 912 | |a GBV_ILN_32 | ||
| 912 | |a GBV_ILN_39 | ||
| 912 | |a GBV_ILN_40 | ||
| 912 | |a GBV_ILN_60 | ||
| 912 | |a GBV_ILN_62 | ||
| 912 | |a GBV_ILN_63 | ||
| 912 | |a GBV_ILN_65 | ||
| 912 | |a GBV_ILN_69 | ||
| 912 | |a GBV_ILN_70 | ||
| 912 | |a GBV_ILN_73 | ||
| 912 | |a GBV_ILN_74 | ||
| 912 | |a GBV_ILN_90 | ||
| 912 | |a GBV_ILN_95 | ||
| 912 | |a GBV_ILN_100 | ||
| 912 | |a GBV_ILN_105 | ||
| 912 | |a GBV_ILN_110 | ||
| 912 | |a GBV_ILN_120 | ||
| 912 | |a GBV_ILN_138 | ||
| 912 | |a GBV_ILN_150 | ||
| 912 | |a GBV_ILN_151 | ||
| 912 | |a GBV_ILN_161 | ||
| 912 | |a GBV_ILN_170 | ||
| 912 | |a GBV_ILN_171 | ||
| 912 | |a GBV_ILN_187 | ||
| 912 | |a GBV_ILN_213 | ||
| 912 | |a GBV_ILN_224 | ||
| 912 | |a GBV_ILN_230 | ||
| 912 | |a GBV_ILN_250 | ||
| 912 | |a GBV_ILN_281 | ||
| 912 | |a GBV_ILN_285 | ||
| 912 | |a GBV_ILN_293 | ||
| 912 | |a GBV_ILN_370 | ||
| 912 | |a GBV_ILN_602 | ||
| 912 | |a GBV_ILN_636 | ||
| 912 | |a GBV_ILN_702 | ||
| 912 | |a GBV_ILN_2001 | ||
| 912 | |a GBV_ILN_2003 | ||
| 912 | |a GBV_ILN_2004 | ||
| 912 | |a GBV_ILN_2005 | ||
| 912 | |a GBV_ILN_2006 | ||
| 912 | |a GBV_ILN_2007 | ||
| 912 | |a GBV_ILN_2008 | ||
| 912 | |a GBV_ILN_2009 | ||
| 912 | |a GBV_ILN_2010 | ||
| 912 | |a GBV_ILN_2011 | ||
| 912 | |a GBV_ILN_2014 | ||
| 912 | |a GBV_ILN_2015 | ||
| 912 | |a GBV_ILN_2020 | ||
| 912 | |a GBV_ILN_2021 | ||
| 912 | |a GBV_ILN_2025 | ||
| 912 | |a GBV_ILN_2026 | ||
| 912 | |a GBV_ILN_2027 | ||
| 912 | |a GBV_ILN_2031 | ||
| 912 | |a GBV_ILN_2034 | ||
| 912 | |a GBV_ILN_2037 | ||
| 912 | |a GBV_ILN_2038 | ||
| 912 | |a GBV_ILN_2039 | ||
| 912 | |a GBV_ILN_2044 | ||
| 912 | |a GBV_ILN_2048 | ||
| 912 | |a GBV_ILN_2049 | ||
| 912 | |a GBV_ILN_2050 | ||
| 912 | |a GBV_ILN_2055 | ||
| 912 | |a GBV_ILN_2057 | ||
| 912 | |a GBV_ILN_2059 | ||
| 912 | |a GBV_ILN_2061 | ||
| 912 | |a GBV_ILN_2064 | ||
| 912 | |a GBV_ILN_2065 | ||
| 912 | |a GBV_ILN_2068 | ||
| 912 | |a GBV_ILN_2070 | ||
| 912 | |a GBV_ILN_2086 | ||
| 912 | |a GBV_ILN_2088 | ||
| 912 | |a GBV_ILN_2093 | ||
| 912 | |a GBV_ILN_2106 | ||
| 912 | |a GBV_ILN_2107 | ||
| 912 | |a GBV_ILN_2108 | ||
| 912 | |a GBV_ILN_2110 | ||
| 912 | |a GBV_ILN_2111 | ||
| 912 | |a GBV_ILN_2112 | ||
| 912 | |a GBV_ILN_2113 | ||
| 912 | |a GBV_ILN_2116 | ||
| 912 | |a GBV_ILN_2118 | ||
| 912 | |a GBV_ILN_2119 | ||
| 912 | |a GBV_ILN_2122 | ||
| 912 | |a GBV_ILN_2129 | ||
| 912 | |a GBV_ILN_2143 | ||
| 912 | |a GBV_ILN_2144 | ||
| 912 | |a GBV_ILN_2147 | ||
| 912 | |a GBV_ILN_2148 | ||
| 912 | |a GBV_ILN_2152 | ||
| 912 | |a GBV_ILN_2153 | ||
| 912 | |a GBV_ILN_2188 | ||
| 912 | |a GBV_ILN_2190 | ||
| 912 | |a GBV_ILN_2232 | ||
| 912 | |a GBV_ILN_2336 | ||
| 912 | |a GBV_ILN_2446 | ||
| 912 | |a GBV_ILN_2470 | ||
| 912 | |a GBV_ILN_2472 | ||
| 912 | |a GBV_ILN_2507 | ||
| 912 | |a GBV_ILN_2522 | ||
| 912 | |a GBV_ILN_2548 | ||
| 912 | |a GBV_ILN_4035 | ||
| 912 | |a GBV_ILN_4037 | ||
| 912 | |a GBV_ILN_4046 | ||
| 912 | |a GBV_ILN_4112 | ||
| 912 | |a GBV_ILN_4125 | ||
| 912 | |a GBV_ILN_4242 | ||
| 912 | |a GBV_ILN_4246 | ||
| 912 | |a GBV_ILN_4249 | ||
| 912 | |a GBV_ILN_4251 | ||
| 912 | |a GBV_ILN_4305 | ||
| 912 | |a GBV_ILN_4306 | ||
| 912 | |a GBV_ILN_4307 | ||
| 912 | |a GBV_ILN_4313 | ||
| 912 | |a GBV_ILN_4322 | ||
| 912 | |a GBV_ILN_4323 | ||
| 912 | |a GBV_ILN_4324 | ||
| 912 | |a GBV_ILN_4325 | ||
| 912 | |a GBV_ILN_4326 | ||
| 912 | |a GBV_ILN_4333 | ||
| 912 | |a GBV_ILN_4334 | ||
| 912 | |a GBV_ILN_4335 | ||
| 912 | |a GBV_ILN_4336 | ||
| 912 | |a GBV_ILN_4338 | ||
| 912 | |a GBV_ILN_4393 | ||
| 912 | |a GBV_ILN_4700 | ||
| 951 | |a AR | ||
| 952 | |d 61 |j 2008 |e 2-3 |c 04 |h 165-167 | ||
| author_variant |
a k ak u c uc h s k hs hsk |
|---|---|
| matchkey_str |
article:09751645:2008----::ehnclrprisfomrilyuelmnusbetdoeeiieed |
| hierarchy_sort_str |
2008 |
| publishDate |
2008 |
| allfields |
10.1007/s12666-008-0032-3 doi (DE-627)SPR026759543 (SPR)s12666-008-0032-3-e DE-627 ger DE-627 rakwb eng 620 660 670 ASE Krishnaiah, A. verfasserin aut Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process 2008 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. Ultimate Tensile Strength (dpeaa)DE-He213 Severe Plastic Deformation (dpeaa)DE-He213 Accumulative Roll Bonding (dpeaa)DE-He213 High Pressure Torsion (dpeaa)DE-He213 Equal Channel Angular Extrusion (dpeaa)DE-He213 Chakkingal, U. verfasserin aut Kim, H. S. verfasserin aut Enthalten in Transactions of the Indian Institute of Metals [New Delhi] : Springer India, 2008 61(2008), 2-3 vom: Apr., Seite 165-167 (DE-627)617807884 (DE-600)2535335-4 0975-1645 nnns volume:61 year:2008 number:2-3 month:04 pages:165-167 https://dx.doi.org/10.1007/s12666-008-0032-3 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_SPRINGER SSG-OLC-PHA GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_120 GBV_ILN_138 GBV_ILN_150 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_171 GBV_ILN_187 GBV_ILN_213 GBV_ILN_224 GBV_ILN_230 GBV_ILN_250 GBV_ILN_281 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_636 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2007 GBV_ILN_2008 GBV_ILN_2009 GBV_ILN_2010 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2057 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2088 GBV_ILN_2093 GBV_ILN_2106 GBV_ILN_2107 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2446 GBV_ILN_2470 GBV_ILN_2472 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_2548 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4046 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4242 GBV_ILN_4246 GBV_ILN_4249 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4336 GBV_ILN_4338 GBV_ILN_4393 GBV_ILN_4700 AR 61 2008 2-3 04 165-167 |
| spelling |
10.1007/s12666-008-0032-3 doi (DE-627)SPR026759543 (SPR)s12666-008-0032-3-e DE-627 ger DE-627 rakwb eng 620 660 670 ASE Krishnaiah, A. verfasserin aut Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process 2008 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. Ultimate Tensile Strength (dpeaa)DE-He213 Severe Plastic Deformation (dpeaa)DE-He213 Accumulative Roll Bonding (dpeaa)DE-He213 High Pressure Torsion (dpeaa)DE-He213 Equal Channel Angular Extrusion (dpeaa)DE-He213 Chakkingal, U. verfasserin aut Kim, H. S. verfasserin aut Enthalten in Transactions of the Indian Institute of Metals [New Delhi] : Springer India, 2008 61(2008), 2-3 vom: Apr., Seite 165-167 (DE-627)617807884 (DE-600)2535335-4 0975-1645 nnns volume:61 year:2008 number:2-3 month:04 pages:165-167 https://dx.doi.org/10.1007/s12666-008-0032-3 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_SPRINGER SSG-OLC-PHA GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_120 GBV_ILN_138 GBV_ILN_150 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_171 GBV_ILN_187 GBV_ILN_213 GBV_ILN_224 GBV_ILN_230 GBV_ILN_250 GBV_ILN_281 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_636 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2007 GBV_ILN_2008 GBV_ILN_2009 GBV_ILN_2010 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2057 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2088 GBV_ILN_2093 GBV_ILN_2106 GBV_ILN_2107 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2446 GBV_ILN_2470 GBV_ILN_2472 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_2548 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4046 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4242 GBV_ILN_4246 GBV_ILN_4249 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4336 GBV_ILN_4338 GBV_ILN_4393 GBV_ILN_4700 AR 61 2008 2-3 04 165-167 |
| allfields_unstemmed |
10.1007/s12666-008-0032-3 doi (DE-627)SPR026759543 (SPR)s12666-008-0032-3-e DE-627 ger DE-627 rakwb eng 620 660 670 ASE Krishnaiah, A. verfasserin aut Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process 2008 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. Ultimate Tensile Strength (dpeaa)DE-He213 Severe Plastic Deformation (dpeaa)DE-He213 Accumulative Roll Bonding (dpeaa)DE-He213 High Pressure Torsion (dpeaa)DE-He213 Equal Channel Angular Extrusion (dpeaa)DE-He213 Chakkingal, U. verfasserin aut Kim, H. S. verfasserin aut Enthalten in Transactions of the Indian Institute of Metals [New Delhi] : Springer India, 2008 61(2008), 2-3 vom: Apr., Seite 165-167 (DE-627)617807884 (DE-600)2535335-4 0975-1645 nnns volume:61 year:2008 number:2-3 month:04 pages:165-167 https://dx.doi.org/10.1007/s12666-008-0032-3 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_SPRINGER SSG-OLC-PHA GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_120 GBV_ILN_138 GBV_ILN_150 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_171 GBV_ILN_187 GBV_ILN_213 GBV_ILN_224 GBV_ILN_230 GBV_ILN_250 GBV_ILN_281 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_636 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2007 GBV_ILN_2008 GBV_ILN_2009 GBV_ILN_2010 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2057 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2088 GBV_ILN_2093 GBV_ILN_2106 GBV_ILN_2107 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2446 GBV_ILN_2470 GBV_ILN_2472 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_2548 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4046 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4242 GBV_ILN_4246 GBV_ILN_4249 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4336 GBV_ILN_4338 GBV_ILN_4393 GBV_ILN_4700 AR 61 2008 2-3 04 165-167 |
| allfieldsGer |
10.1007/s12666-008-0032-3 doi (DE-627)SPR026759543 (SPR)s12666-008-0032-3-e DE-627 ger DE-627 rakwb eng 620 660 670 ASE Krishnaiah, A. verfasserin aut Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process 2008 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. Ultimate Tensile Strength (dpeaa)DE-He213 Severe Plastic Deformation (dpeaa)DE-He213 Accumulative Roll Bonding (dpeaa)DE-He213 High Pressure Torsion (dpeaa)DE-He213 Equal Channel Angular Extrusion (dpeaa)DE-He213 Chakkingal, U. verfasserin aut Kim, H. S. verfasserin aut Enthalten in Transactions of the Indian Institute of Metals [New Delhi] : Springer India, 2008 61(2008), 2-3 vom: Apr., Seite 165-167 (DE-627)617807884 (DE-600)2535335-4 0975-1645 nnns volume:61 year:2008 number:2-3 month:04 pages:165-167 https://dx.doi.org/10.1007/s12666-008-0032-3 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_SPRINGER SSG-OLC-PHA GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_120 GBV_ILN_138 GBV_ILN_150 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_171 GBV_ILN_187 GBV_ILN_213 GBV_ILN_224 GBV_ILN_230 GBV_ILN_250 GBV_ILN_281 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_636 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2007 GBV_ILN_2008 GBV_ILN_2009 GBV_ILN_2010 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2057 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2088 GBV_ILN_2093 GBV_ILN_2106 GBV_ILN_2107 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2446 GBV_ILN_2470 GBV_ILN_2472 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_2548 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4046 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4242 GBV_ILN_4246 GBV_ILN_4249 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4336 GBV_ILN_4338 GBV_ILN_4393 GBV_ILN_4700 AR 61 2008 2-3 04 165-167 |
| allfieldsSound |
10.1007/s12666-008-0032-3 doi (DE-627)SPR026759543 (SPR)s12666-008-0032-3-e DE-627 ger DE-627 rakwb eng 620 660 670 ASE Krishnaiah, A. verfasserin aut Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process 2008 Text txt rdacontent Computermedien c rdamedia Online-Ressource cr rdacarrier Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. Ultimate Tensile Strength (dpeaa)DE-He213 Severe Plastic Deformation (dpeaa)DE-He213 Accumulative Roll Bonding (dpeaa)DE-He213 High Pressure Torsion (dpeaa)DE-He213 Equal Channel Angular Extrusion (dpeaa)DE-He213 Chakkingal, U. verfasserin aut Kim, H. S. verfasserin aut Enthalten in Transactions of the Indian Institute of Metals [New Delhi] : Springer India, 2008 61(2008), 2-3 vom: Apr., Seite 165-167 (DE-627)617807884 (DE-600)2535335-4 0975-1645 nnns volume:61 year:2008 number:2-3 month:04 pages:165-167 https://dx.doi.org/10.1007/s12666-008-0032-3 lizenzpflichtig Volltext GBV_USEFLAG_A SYSFLAG_A GBV_SPRINGER SSG-OLC-PHA GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_120 GBV_ILN_138 GBV_ILN_150 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_171 GBV_ILN_187 GBV_ILN_213 GBV_ILN_224 GBV_ILN_230 GBV_ILN_250 GBV_ILN_281 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_636 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2007 GBV_ILN_2008 GBV_ILN_2009 GBV_ILN_2010 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2057 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2088 GBV_ILN_2093 GBV_ILN_2106 GBV_ILN_2107 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2446 GBV_ILN_2470 GBV_ILN_2472 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_2548 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4046 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4242 GBV_ILN_4246 GBV_ILN_4249 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4336 GBV_ILN_4338 GBV_ILN_4393 GBV_ILN_4700 AR 61 2008 2-3 04 165-167 |
| language |
English |
| source |
Enthalten in Transactions of the Indian Institute of Metals 61(2008), 2-3 vom: Apr., Seite 165-167 volume:61 year:2008 number:2-3 month:04 pages:165-167 |
| sourceStr |
Enthalten in Transactions of the Indian Institute of Metals 61(2008), 2-3 vom: Apr., Seite 165-167 volume:61 year:2008 number:2-3 month:04 pages:165-167 |
| format_phy_str_mv |
Article |
| institution |
findex.gbv.de |
| topic_facet |
Ultimate Tensile Strength Severe Plastic Deformation Accumulative Roll Bonding High Pressure Torsion Equal Channel Angular Extrusion |
| dewey-raw |
620 |
| isfreeaccess_bool |
false |
| container_title |
Transactions of the Indian Institute of Metals |
| authorswithroles_txt_mv |
Krishnaiah, A. @@aut@@ Chakkingal, U. @@aut@@ Kim, H. S. @@aut@@ |
| publishDateDaySort_date |
2008-04-01T00:00:00Z |
| hierarchy_top_id |
617807884 |
| dewey-sort |
3620 |
| id |
SPR026759543 |
| language_de |
englisch |
| fullrecord |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">SPR026759543</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230519190210.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">201007s2008 xx |||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/s12666-008-0032-3</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)SPR026759543</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(SPR)s12666-008-0032-3-e</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">620</subfield><subfield code="a">660</subfield><subfield code="a">670</subfield><subfield code="q">ASE</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Krishnaiah, A.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2008</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Ultimate Tensile Strength</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Severe Plastic Deformation</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Accumulative Roll Bonding</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">High Pressure Torsion</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Equal Channel Angular Extrusion</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Chakkingal, U.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Kim, H. S.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">Transactions of the Indian Institute of Metals</subfield><subfield code="d">[New Delhi] : Springer India, 2008</subfield><subfield code="g">61(2008), 2-3 vom: Apr., Seite 165-167</subfield><subfield code="w">(DE-627)617807884</subfield><subfield code="w">(DE-600)2535335-4</subfield><subfield code="x">0975-1645</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:61</subfield><subfield code="g">year:2008</subfield><subfield code="g">number:2-3</subfield><subfield code="g">month:04</subfield><subfield code="g">pages:165-167</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://dx.doi.org/10.1007/s12666-008-0032-3</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_SPRINGER</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-PHA</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_11</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_31</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_32</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_90</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_100</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_120</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_138</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_150</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_171</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_187</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_224</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_250</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_281</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_636</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_702</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2001</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2003</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2004</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2005</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2006</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2007</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2008</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2009</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2010</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2011</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2015</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2025</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2026</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2027</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2031</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2034</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2038</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2039</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2044</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2048</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2049</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2050</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2055</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2057</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2059</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2061</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2064</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2065</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2068</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2070</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2086</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2088</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2093</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2106</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2107</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2108</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2111</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2113</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2116</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2118</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2119</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2122</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2129</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2143</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2144</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2147</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2148</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2152</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2153</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2188</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2190</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2232</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2336</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2446</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2470</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2472</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2507</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2522</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2548</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4035</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4046</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4242</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4246</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4251</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4326</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4333</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4334</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4336</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4393</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">61</subfield><subfield code="j">2008</subfield><subfield code="e">2-3</subfield><subfield code="c">04</subfield><subfield code="h">165-167</subfield></datafield></record></collection>
|
| author |
Krishnaiah, A. |
| spellingShingle |
Krishnaiah, A. ddc 620 misc Ultimate Tensile Strength misc Severe Plastic Deformation misc Accumulative Roll Bonding misc High Pressure Torsion misc Equal Channel Angular Extrusion Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process |
| authorStr |
Krishnaiah, A. |
| ppnlink_with_tag_str_mv |
@@773@@(DE-627)617807884 |
| format |
electronic Article |
| dewey-ones |
620 - Engineering & allied operations 660 - Chemical engineering 670 - Manufacturing |
| delete_txt_mv |
keep |
| author_role |
aut aut aut |
| collection |
springer |
| remote_str |
true |
| illustrated |
Not Illustrated |
| issn |
0975-1645 |
| topic_title |
620 660 670 ASE Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process Ultimate Tensile Strength (dpeaa)DE-He213 Severe Plastic Deformation (dpeaa)DE-He213 Accumulative Roll Bonding (dpeaa)DE-He213 High Pressure Torsion (dpeaa)DE-He213 Equal Channel Angular Extrusion (dpeaa)DE-He213 |
| topic |
ddc 620 misc Ultimate Tensile Strength misc Severe Plastic Deformation misc Accumulative Roll Bonding misc High Pressure Torsion misc Equal Channel Angular Extrusion |
| topic_unstemmed |
ddc 620 misc Ultimate Tensile Strength misc Severe Plastic Deformation misc Accumulative Roll Bonding misc High Pressure Torsion misc Equal Channel Angular Extrusion |
| topic_browse |
ddc 620 misc Ultimate Tensile Strength misc Severe Plastic Deformation misc Accumulative Roll Bonding misc High Pressure Torsion misc Equal Channel Angular Extrusion |
| format_facet |
Elektronische Aufsätze Aufsätze Elektronische Ressource |
| format_main_str_mv |
Text Zeitschrift/Artikel |
| carriertype_str_mv |
cr |
| hierarchy_parent_title |
Transactions of the Indian Institute of Metals |
| hierarchy_parent_id |
617807884 |
| dewey-tens |
620 - Engineering 660 - Chemical engineering 670 - Manufacturing |
| hierarchy_top_title |
Transactions of the Indian Institute of Metals |
| isfreeaccess_txt |
false |
| familylinks_str_mv |
(DE-627)617807884 (DE-600)2535335-4 |
| title |
Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process |
| ctrlnum |
(DE-627)SPR026759543 (SPR)s12666-008-0032-3-e |
| title_full |
Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process |
| author_sort |
Krishnaiah, A. |
| journal |
Transactions of the Indian Institute of Metals |
| journalStr |
Transactions of the Indian Institute of Metals |
| lang_code |
eng |
| isOA_bool |
false |
| dewey-hundreds |
600 - Technology |
| recordtype |
marc |
| publishDateSort |
2008 |
| contenttype_str_mv |
txt |
| container_start_page |
165 |
| author_browse |
Krishnaiah, A. Chakkingal, U. Kim, H. S. |
| container_volume |
61 |
| class |
620 660 670 ASE |
| format_se |
Elektronische Aufsätze |
| author-letter |
Krishnaiah, A. |
| doi_str_mv |
10.1007/s12666-008-0032-3 |
| dewey-full |
620 660 670 |
| author2-role |
verfasserin |
| title_sort |
mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process |
| title_auth |
Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process |
| abstract |
Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. |
| abstractGer |
Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. |
| abstract_unstemmed |
Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys. |
| collection_details |
GBV_USEFLAG_A SYSFLAG_A GBV_SPRINGER SSG-OLC-PHA GBV_ILN_11 GBV_ILN_20 GBV_ILN_22 GBV_ILN_23 GBV_ILN_24 GBV_ILN_31 GBV_ILN_32 GBV_ILN_39 GBV_ILN_40 GBV_ILN_60 GBV_ILN_62 GBV_ILN_63 GBV_ILN_65 GBV_ILN_69 GBV_ILN_70 GBV_ILN_73 GBV_ILN_74 GBV_ILN_90 GBV_ILN_95 GBV_ILN_100 GBV_ILN_105 GBV_ILN_110 GBV_ILN_120 GBV_ILN_138 GBV_ILN_150 GBV_ILN_151 GBV_ILN_161 GBV_ILN_170 GBV_ILN_171 GBV_ILN_187 GBV_ILN_213 GBV_ILN_224 GBV_ILN_230 GBV_ILN_250 GBV_ILN_281 GBV_ILN_285 GBV_ILN_293 GBV_ILN_370 GBV_ILN_602 GBV_ILN_636 GBV_ILN_702 GBV_ILN_2001 GBV_ILN_2003 GBV_ILN_2004 GBV_ILN_2005 GBV_ILN_2006 GBV_ILN_2007 GBV_ILN_2008 GBV_ILN_2009 GBV_ILN_2010 GBV_ILN_2011 GBV_ILN_2014 GBV_ILN_2015 GBV_ILN_2020 GBV_ILN_2021 GBV_ILN_2025 GBV_ILN_2026 GBV_ILN_2027 GBV_ILN_2031 GBV_ILN_2034 GBV_ILN_2037 GBV_ILN_2038 GBV_ILN_2039 GBV_ILN_2044 GBV_ILN_2048 GBV_ILN_2049 GBV_ILN_2050 GBV_ILN_2055 GBV_ILN_2057 GBV_ILN_2059 GBV_ILN_2061 GBV_ILN_2064 GBV_ILN_2065 GBV_ILN_2068 GBV_ILN_2070 GBV_ILN_2086 GBV_ILN_2088 GBV_ILN_2093 GBV_ILN_2106 GBV_ILN_2107 GBV_ILN_2108 GBV_ILN_2110 GBV_ILN_2111 GBV_ILN_2112 GBV_ILN_2113 GBV_ILN_2116 GBV_ILN_2118 GBV_ILN_2119 GBV_ILN_2122 GBV_ILN_2129 GBV_ILN_2143 GBV_ILN_2144 GBV_ILN_2147 GBV_ILN_2148 GBV_ILN_2152 GBV_ILN_2153 GBV_ILN_2188 GBV_ILN_2190 GBV_ILN_2232 GBV_ILN_2336 GBV_ILN_2446 GBV_ILN_2470 GBV_ILN_2472 GBV_ILN_2507 GBV_ILN_2522 GBV_ILN_2548 GBV_ILN_4035 GBV_ILN_4037 GBV_ILN_4046 GBV_ILN_4112 GBV_ILN_4125 GBV_ILN_4242 GBV_ILN_4246 GBV_ILN_4249 GBV_ILN_4251 GBV_ILN_4305 GBV_ILN_4306 GBV_ILN_4307 GBV_ILN_4313 GBV_ILN_4322 GBV_ILN_4323 GBV_ILN_4324 GBV_ILN_4325 GBV_ILN_4326 GBV_ILN_4333 GBV_ILN_4334 GBV_ILN_4335 GBV_ILN_4336 GBV_ILN_4338 GBV_ILN_4393 GBV_ILN_4700 |
| container_issue |
2-3 |
| title_short |
Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process |
| url |
https://dx.doi.org/10.1007/s12666-008-0032-3 |
| remote_bool |
true |
| author2 |
Chakkingal, U. Kim, H. S. |
| author2Str |
Chakkingal, U. Kim, H. S. |
| ppnlink |
617807884 |
| mediatype_str_mv |
c |
| isOA_txt |
false |
| hochschulschrift_bool |
false |
| doi_str |
10.1007/s12666-008-0032-3 |
| up_date |
2024-07-03T22:37:36.974Z |
| _version_ |
1803599223967449088 |
| fullrecord_marcxml |
<?xml version="1.0" encoding="UTF-8"?><collection xmlns="http://www.loc.gov/MARC21/slim"><record><leader>01000caa a22002652 4500</leader><controlfield tag="001">SPR026759543</controlfield><controlfield tag="003">DE-627</controlfield><controlfield tag="005">20230519190210.0</controlfield><controlfield tag="007">cr uuu---uuuuu</controlfield><controlfield tag="008">201007s2008 xx |||||o 00| ||eng c</controlfield><datafield tag="024" ind1="7" ind2=" "><subfield code="a">10.1007/s12666-008-0032-3</subfield><subfield code="2">doi</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(DE-627)SPR026759543</subfield></datafield><datafield tag="035" ind1=" " ind2=" "><subfield code="a">(SPR)s12666-008-0032-3-e</subfield></datafield><datafield tag="040" ind1=" " ind2=" "><subfield code="a">DE-627</subfield><subfield code="b">ger</subfield><subfield code="c">DE-627</subfield><subfield code="e">rakwb</subfield></datafield><datafield tag="041" ind1=" " ind2=" "><subfield code="a">eng</subfield></datafield><datafield tag="082" ind1="0" ind2="4"><subfield code="a">620</subfield><subfield code="a">660</subfield><subfield code="a">670</subfield><subfield code="q">ASE</subfield></datafield><datafield tag="100" ind1="1" ind2=" "><subfield code="a">Krishnaiah, A.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="245" ind1="1" ind2="0"><subfield code="a">Mechanical properties of commercially pure aluminium subjected to repetitive bending and straightening process</subfield></datafield><datafield tag="264" ind1=" " ind2="1"><subfield code="c">2008</subfield></datafield><datafield tag="336" ind1=" " ind2=" "><subfield code="a">Text</subfield><subfield code="b">txt</subfield><subfield code="2">rdacontent</subfield></datafield><datafield tag="337" ind1=" " ind2=" "><subfield code="a">Computermedien</subfield><subfield code="b">c</subfield><subfield code="2">rdamedia</subfield></datafield><datafield tag="338" ind1=" " ind2=" "><subfield code="a">Online-Ressource</subfield><subfield code="b">cr</subfield><subfield code="2">rdacarrier</subfield></datafield><datafield tag="520" ind1=" " ind2=" "><subfield code="a">Abstract The feasibility of using the Repetitive Bending and Straightening (RBS) process to improve the mechanical properties of commercial purity aluminium has been investigated. RBS was carried out by bending with a U-bending die of 10 mm radius followed by straightening between flat dies. The ultimate tensile strength (UTS) and yield strength (YS) slightly increased with increasing number of passes. The maximum UTS of 84 MPa and YS of 68 MPa were obtained after four passes and % elongation to failure decreased from 46% to 35% after four passes. The RBS processed Al showed poor improvement in mechanical properties as compared to other SPD processes. Repetitive bending and straightening process is therefore not an effective process to introduce fine grained structures in metals or alloys.</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Ultimate Tensile Strength</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Severe Plastic Deformation</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Accumulative Roll Bonding</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">High Pressure Torsion</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="650" ind1=" " ind2="4"><subfield code="a">Equal Channel Angular Extrusion</subfield><subfield code="7">(dpeaa)DE-He213</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Chakkingal, U.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="700" ind1="1" ind2=" "><subfield code="a">Kim, H. S.</subfield><subfield code="e">verfasserin</subfield><subfield code="4">aut</subfield></datafield><datafield tag="773" ind1="0" ind2="8"><subfield code="i">Enthalten in</subfield><subfield code="t">Transactions of the Indian Institute of Metals</subfield><subfield code="d">[New Delhi] : Springer India, 2008</subfield><subfield code="g">61(2008), 2-3 vom: Apr., Seite 165-167</subfield><subfield code="w">(DE-627)617807884</subfield><subfield code="w">(DE-600)2535335-4</subfield><subfield code="x">0975-1645</subfield><subfield code="7">nnns</subfield></datafield><datafield tag="773" ind1="1" ind2="8"><subfield code="g">volume:61</subfield><subfield code="g">year:2008</subfield><subfield code="g">number:2-3</subfield><subfield code="g">month:04</subfield><subfield code="g">pages:165-167</subfield></datafield><datafield tag="856" ind1="4" ind2="0"><subfield code="u">https://dx.doi.org/10.1007/s12666-008-0032-3</subfield><subfield code="z">lizenzpflichtig</subfield><subfield code="3">Volltext</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_USEFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SYSFLAG_A</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_SPRINGER</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">SSG-OLC-PHA</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_11</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_20</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_22</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_23</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_24</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_31</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_32</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_39</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_40</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_60</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_62</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_63</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_65</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_69</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_70</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_73</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_74</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_90</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_95</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_100</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_105</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_120</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_138</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_150</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_151</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_161</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_170</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_171</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_187</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_213</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_224</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_230</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_250</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_281</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_285</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_293</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_370</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_602</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_636</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_702</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2001</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2003</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2004</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2005</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2006</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2007</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2008</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2009</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2010</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2011</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2014</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2015</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2020</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2021</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2025</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2026</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2027</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2031</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2034</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2038</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2039</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2044</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2048</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2049</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2050</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2055</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2057</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2059</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2061</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2064</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2065</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2068</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2070</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2086</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2088</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2093</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2106</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2107</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2108</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2110</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2111</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2113</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2116</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2118</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2119</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2122</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2129</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2143</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2144</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2147</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2148</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2152</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2153</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2188</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2190</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2232</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2336</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2446</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2470</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2472</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2507</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2522</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_2548</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4035</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4037</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4046</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4112</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4125</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4242</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4246</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4249</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4251</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4305</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4306</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4307</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4313</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4322</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4323</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4324</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4325</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4326</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4333</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4334</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4335</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4336</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4338</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4393</subfield></datafield><datafield tag="912" ind1=" " ind2=" "><subfield code="a">GBV_ILN_4700</subfield></datafield><datafield tag="951" ind1=" " ind2=" "><subfield code="a">AR</subfield></datafield><datafield tag="952" ind1=" " ind2=" "><subfield code="d">61</subfield><subfield code="j">2008</subfield><subfield code="e">2-3</subfield><subfield code="c">04</subfield><subfield code="h">165-167</subfield></datafield></record></collection>
|
| score |
7.398361 |